煤系石墨微晶结构各向异性和非均质性的拉曼光谱表征

doi:10.3964/j.issn.1000-0593(2024)12-3560-08

Abstract
References
Related Citation (15)

Download: PDF (12065 KB)
Export: BibTeX | EndNote (RIS)

Abstract Coal is very sensitive to geological environmental conditions such as temperature and pressure. Driven by tectonic stress, coal's “graphite crystallite” structure grows in orientation, and the physical chemistry and structure show anisotropy. X-ray diffraction and Raman spectroscopy characterized the samples with different degrees of graphitization. The results show that the coal seam slides along the layer under high temperatures and shear stress. The structural deformation makes the graphite crystallites rotate and preferentially oriented, increasing the stacking height along the c-axis direction. The anthracite stage is divided by the stacking degree L_c≤5 nm, which is a turbulent layer structure with random orientation or irregular arrangement of carbon layers, optically isotropic; when L_c≥30 nm, it is regarded as a sign of the formation of a perfect graphite structure, and the optical anisotropy is significant. It belongs to the transition state structure (semi-graphite stage) with an imperfect graphitization structure between 10~20 nm. The 1 350 cm^-1 band (D₁) and 1 620 cm^-1 band (D₂) in the Raman spectra of SXL100 and SXL130 samples in the graphite stage are obvious. Still, the full width at half maximum of the D₁ to G peak (I_D1/I_G, R₁), and the intensity ratio of D₂ to G peak (I_D2/I_G, R₃) in the Raman spectra of the graphite edge plane are significantly higher than those of the preferred orientation plane, indicating that the Raman parameters such as intensity ratio depend on the orientation of the edge plane of coal-based graphite. The intensity of the D₁ peak depends on the degree of defect or disorder of the sample. The D₂ peak of the edge plane has asymmetric characteristics, and the bimodal structure is significant. The D′₁ peak changes with the D₂ peak, which also shows the spectral behavior of the edge plane defect. The stages of anthracite (R₁≥1.0), semi-graphite (1.0>R₁≥0.5), and graphite (R₁<0.5) were divided by the defect density or order degree index R₁ of coal measures graphite, and the uniformity of coal measures graphite and the proportion and distribution of components with different graphitization degrees were evaluated. It was found that the proportion of advanced evolution to semi-graphite structure in the metamorphic anthracite CM130N sample was 3.52%, the proportion of anthracite structure in the semi-graphite BC210 sample was 46.40%, and the SXL130 sample was graphitized as a whole. However, the proportion of anthracite structure was still 3.84%, and there were still defects in the preferred orientation plane and edge plane structure. The established method has more advantages in distinguishing anthracite and semi-graphite. When the incident direction of the Raman laser is constant, R₁ and R₃ parameters can be used to explore the Raman spectral characteristics of coal measures graphite preferred orientation plane affected by tectonic stress and to evaluate the heterogeneity of graphitization and the orientation of graphite crystallites.

Key words：Coal measures graphite; Anisotropic; Heterogeneity; Raman spectroscopy; Micro-crystalline structure

Received: 2023-12-09 Accepted: 2024-05-06

ZTFLH:

TQ533.6

Corresponding Authors: ZOU Xiao-yan E-mail: zxyan2012@126.com

Cite this article:

LI Huan-tong,ZOU Xiao-yan,XIA Yan, et al. Anisotropic and Heterogeneity of Coal Measures Graphite Micro-Crystalline Structure by Raman Spectroscopy[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2024, 44(12): 3560-3567.

URL:

https://www.gpxygpfx.com/EN/10.3964/j.issn.1000-0593(2024)12-3560-08 OR https://www.gpxygpfx.com/EN/Y2024/V44/I12/3560