|
|
|
|
|
|
Spectroscopic Analysis of Preparation of Ecological Activated Carbon Based on Electric Furnace Slag Ultrafine Powder Modified Biomass Waste Material |
ZHANG Hao1, 2, 3, ZHANG Lei3, LONG Hong-ming1, 2* |
1. Key Laboratory of Metallurgical Emission Reduction & Resources Recycling (Anhui University of Technology), Ministry of Education, Ma’anshan 243002, China
2. School of Metallurgical Engineering, Anhui University of Technology, Ma’anshan 243032, China
3. School of Civil Engineering and Architecture, Anhui University of Technology, Ma’anshan 243032, China |
|
|
Abstract Activated carbon with developed porous structure and abundant specific surface area was prepared from wood, bamboo and other biological resources, which has the problems of high production cost, being unfavorable to the sustainable development of ecological environment, short service life and being easy to cause secondary pollution of indoor environment after failure. Metallurgical solid waste and biomass waste as a major by-product of industrial production and agricultural production, their use is difficult to achieve, with low added value and high cost, leading to the fact that a large number of metallurgical solid waste and biomass waste cannot be disposed in direct stacking and landfill, causing not only the pollution of ecological environment, but also a great waste of potential resources. In the face of the above problems, the development of low price and superior performance of ecological activated carbon with metallurgical solid waste and biomass waste has become not only one of main methods to achieve the high value-added utilization of metallurgical solid waste and biomass waste and the sustainable development of resources, but also one of main methods to achieve the great reduction of the production cost of modified activated carbon and improve economic benefits. In this paper, walnut shell and electric furnace slag were studied firstly, ecological activated carbon for formaldehyde degradation was prepared by metal oxides contained in the electric furnace slag modified to treat the biomass waste, and performance of ecological activated carbon was tested by referring to Indoor decorating and refurbishing materials-Limit of formaldehyde emission of wood-based panels and finishing products (GB18580—2017). Element content was characterized and analyzed by X-ray photoelectron spectroscopy (XPS), chemical component was characterized and analyzed by X-ray fluorescence spectrometer (XRF), composition structure was characterized and analyzed by fourier transform infrared spectrometer (FTIR), mineral composition was characterized and analyzed by X-ray diffractometer (XRD), microstructure was characterized and analyzed by scanning electron microscope (SEM), particle size distribution was characterized and analyzed by laser particle analyzer (LPSA) and pore structure was characterized and analyzed by specific surface area and pore size distribution analyzer (BET), so as to reveal the mechanism of preparing ecological activated carbon from walnut shell and electric furnace slag, and the degradation mechanism of formaldehyde by ecological activated carbon. The results showed that ecological activated carbon with good degradation performance of formaldehyde is prepared by walnut shell ultrafine powder and electric furnace slag ultrafine powder, not only realizing the high value-added utilization of metallurgical solid waste and biomass waste, but also putting forward the new indoor air formaldehyde management concept of “treating danger by waste”. Electric furnace slag ultrafine powder is well wrapped in the layered structure of ecological activated carbon, to promote the pulverization rate of ecological activated carbon and forming particles with small particle size can improve the degradation area of ecological activated carbon and formaldehyde. Fe element, Mn element and Ti element are contained in electric furnace slag ultrafine powder; the magnetic property of Fe element induces the formation and enrichment of large amounts of formaldehyde on the pore structure surface of biomass activated carbon, and Mn element and Ti element catalyze the degradation of the enriched formaldehyde, realizing the synergistic effect of adsorption degradation and catalytic degradation.
|
Received: 2019-02-10
Accepted: 2019-06-02
|
|
Corresponding Authors:
LONG Hong-ming
E-mail: yaflhm@126.com
|
|
[1] Zhang X L, Zhang Y, Wang S S, et al. Science China Technological Sciences, 2010, 53(9): 2515.
[2] Zhang H, Li Z H. Open Medicine, 2019, 14: 673.
[3] ZHANG Hao, LIU Xiu-yu, LIU Ying(张 浩,刘秀玉,刘 影). Spectroscopy and Spectral Analysis(光谱学与光谱分析),2019, 39(3): 937.
[4] Sun Y, Webley P A. Chemical Engineering Journal, 2010, 162: 883.
[5] Hou X J, Wang Y, Yang Y L, et al. Energy, 2019, 188: 116081.
[6] Fang N J, Guo J X, Shu S, et al. Fuel, 2017, 202: 328.
[7] Jie D, Qin Z, Zhang S. Journal of Molecular Catalysis A Chemical, 2014, 393(18): 222.
[8] Ramezanianpour A A, Kazemian A, Moghaddam M A, et al. Materials & Structures, 2016, 49(7): 2597.
[9] Morel F, Bounor-Legaré V, Espuche E, et al. European Polymer Journal, 2012, 48(5): 919.
[10] Zhang H,Fang Y. Journal of Alloys and Compounds, 2019, 781: 201.
[11] ZHANG Hao(张 浩). Journal of Materials Engineering(材料工程), 2018, 46(1): 114.
[12] Chen L, Yin S F, Luo S L, et al. Industrial & Engineering Chemistry Research, 2012, 51(19): 6760.
[13] Fu Y L, Zhang Y F, Li G Q, et al. Journal of the Energy Institute, 2017, 90(5): 813.
[14] Guo Y, Li Y, Zhu T, et al. Fuel, 2015, 143: 536. |
[1] |
SUN Da-wei1, 2, 3, DENG Jun1, 2*, JI Bing-bing4. Study on the Preparation Mechanism of Steel Slag-Based Biomass Activated Carbon by Special Steel Slag-Discard Walnut Shells Based on ICP-MS[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(07): 2308-2312. |
[2] |
ZONG Zhi-fang1, XU Wei-cheng2, CHEN De-peng1*, TANG Gang1, ZHOU Xiao-hui1, DONG Wei1, WU Yu-xi2. Preparation Mechanism of Decylic Acid-Palmitic Acid/SiO2@TiO2
Photocatalytic Phase Change Microcapsules Based on
Multiple Spectrum Analysis[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(04): 1306-1313. |
[3] |
ZHANG Hao1, 2, HAN Wei-sheng1, CHENG Zheng-ming3, FAN Wei-wei1, LONG Hong-ming2, LIU Zi-min4, ZHANG Gui-wen5. Thermal Oxidative Aging Mechanism of Modified Steel Slag/Rubber Composites Based on SEM and FTIR[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2022, 42(12): 3906-3912. |
[4] |
LIU Guo-hua, LI Qi-hua*, OU Jin-ping, XU Heng, ZHU Peng-cheng, LIU Hao-ran. Passive Spectrum Measurement of HCHO in Chongqing Area Based on MAX-DOAS[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2022, 42(01): 243-247. |
[5] |
HE Xiong-fei1, 2, HUANG Wei3, TANG Gang3, ZHANG Hao3*. Mechanism Investigation of Cement-Based Permeable Crystalline Waterproof Material Based on Spectral Analysis[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2021, 41(12): 3909-3914. |
[6] |
HE Qi-xin, LI Jia-kun, FENG Qi-bo*. Development of a Mid-Infrared Cavity Enhanced Formaldehyde Detection System[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2021, 41(07): 2077-2081. |
[7] |
ZHANG Hao1, 2, 4, LI Hai-li1, LONG Hong-ming2, 4, LIU Zi-min3, ZHANG Yao-hui3, ZHENG Wei-cheng4. Spectroscopic Analysis of Reinforcing-Flame Retardant Mechanism of Modified Steel Slag-Mineral Powder Composite Rubber Filler[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2021, 41(04): 1138-1143. |
[8] |
YANG Chuan-xiao, GONG Wei-bin, TANG Fan, SUN Xiang-ying. Determination of Sodium Hexametaphosphate by Ratiometric Fluorescence Method Based on Formaldehyde Functionalized Polyethyleneimine/Eosin Y System[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2021, 41(02): 454-459. |
[9] |
ZHANG Hao1,2, GAO Qing1, HAN Xiang-xiang1, RUAN Gao-yang1, LIU Xiu-yu1. Mechanism Analysis of Formaldehyde Degradation by Hot Braised Slag Modified Activated Carbon Based on XRF and XRD[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2020, 40(05): 1447-1451. |
[10] |
LIU Xiu-yu, ZHANG Bing, ZHANG Hao, DU Xiao-yan, TANG Gang*. Research of Flame Retardant Mechanism for RPUF/EG Composites Based on TG-FTIR and XPS[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2020, 40(05): 1626-1633. |
[11] |
ZHANG Hao1,2, FAN Wei-wei1. Spectroscopic Analysis of Activated Carbon Mixed with Steel Slag Composite Material in Sintering Flue Gas of Desulfurization and Denitration[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2020, 40(04): 1195-1200. |
[12] |
WANG Hao1, 2, JIN Bao-sheng1*, WANG Xiao-jia1, YU Bo2, CAO Jun1, Lü Dong-qiang2. Research of Texture Structure for Coke Layer in Ascension Pipe of Coke Oven Based on SEM and XPS[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2019, 39(11): 3333-3339. |
[13] |
WANG Hao1, 2, JIN Bao-sheng1*, WANG Xiao-jia1, YU Bo2, CAO Jun1. Spectroscopical Analysis and Coking Mechanisim of Char Layer in Ascension Pipe of Coke Oven[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2019, 39(10): 3148-3153. |
[14] |
WEI Min-hong1,2, LIU Cheng2*, LI Su-wen1, CHEN Zheng-hui1, MOU Fu-sheng1. Measurement of Tropospheric HCHO by MAX-DOAS Based on QDOAS[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2019, 39(08): 2332-2336. |
[15] |
CAO Si-min, LIU Yang-yi, ZHOU Zhong-neng, CHEN Jin-quan, XU Jian-hua*. Study on Spectral Characteristics of a Novel Formaldehyde Probe Based on Fluoral-P Derivatives[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2019, 39(03): 828-833. |
|
|
|
|