基于高光谱成像技术和MNF检测苹果的轻微损伤

doi:10.3964/j.issn.1000-0593(2014)05-1367-06

Abstract
References
Related Citation (15)

Download: PDF (2389 KB)
Export: BibTeX | EndNote (RIS)

Abstract Bruising is one of the major defects occurring on apple surface inevitably during postharvest handling and processing stage. To detect slight bruises on apples fast and efficiently, a novel bruises detection algorithm based on hyperspectral imaging and minimum noise fraction transform is proposed. First, the hyperspectral images in the visible and near-infrared (400~1 000 nm) ranges are acquired, and MNF transform based on full ranges could obtain better detection performance compared to PCA transform; Second, five wavebands (560, 660, 720, 820 and 960 nm) are selected as the effective wavebands based on the coefficient curve of I-RELIEF method conducted on spectra extracted from intact and bruise surface; Third, the bruises detection algorithm is developed based on the effective wavebands and MNF transform method. For the investigated 40 sound samples and 40 different time stage bruise samples, the results with a 97.1% overall detection rate are got. The recognition results indicate that the proposed methods and the effective wavelengths selected in this paper are feasible and efficient. This research lays a foundation for the development of multispectral imaging system based on MNF transform for slight bruises detection on apples.

Key words：Hyperspectral computer vision;Apple bruises;MNF;Detection

Received: 2013-06-27 Accepted: 2013-09-19

ZTFLH:	TP391.4
	S26

Corresponding Authors: ZHAO Chun-jiang E-mail: zhaocj@nercita.org.cn

Cite this article:

ZHANG Bao-hua,HUANG Wen-qian,LI Jiang-bo, et al. Detection of Slight Bruises on Apples Based on Hyperspectral Imaging and MNF Transform [J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2014, 34(05): 1367-1372.

URL:

https://www.gpxygpfx.com/EN/10.3964/j.issn.1000-0593(2014)05-1367-06 OR https://www.gpxygpfx.com/EN/Y2014/V34/I05/1367

[1] LI Jiang-bo，RAO Xiu-qin，YING Yi-bin，et al(李江波，饶秀勤，应义斌，等). Transactions of the Chinese Society of Agricultural Engineering(农业工程学报) ，2010，26(8)：222.
[2] Piotr Baranowski，Wojciech Mazurek，Joanna Wozniak，et al. Journal of Food Engineering，2012，110: 345.
[3] Juan Xing，Cedric Bravo，Pal T Jancsok，et al. Biosystem Engineering，2005，90(1): 27.
[4] Kleynen O，Leemans V，Destain M F. Postharvest Biology and Technology，2000，30(3): 221.
[5] HUANG Wen-qian，CHEN Li-ping，LI Jiang-bo，et al(黄文倩，陈立平，李江波，等). Transactions of the Chinese Society of Agricultural Engineering(农业工程学报)，2013，29(1)：272.
[6] Gamal ElMasry，Wang Ning，Clement Vigneault，et al. Swiss Society of Food Science and Technology，2008，41(2): 337.
[7] Li Jiangbo，Rao Xiuqin，Ying Yibin. Computers and Electronics in Agriculture，2011，78(1)：38.
[8] Sun YiJun. IEEE Transactions on Pattern Analysis and Machine Intelligence，2007，29(6): 1035.
[9] Lorente D，Aleixos N，Gomez-Sanchis J，et al. Food Bioprocess Technol.，2012，5(4): 1121.
[10] Qin Jiangwei，Chao Kuanglin，Kim Moon S，et al. Journal of Food Engineering，2013，118(2): 157.
[11] Mehl Patrick M，Chen Yud-Ren，Kim Moon S，et al. Journal of Food Engineering，2004，61(1): 67.
[12] LI Jiang-bo，RAO Xiu-qin，YING Yi-bin(李江波，饶秀勤，应义斌). Spectroscopy and Spectral Analysis(光谱学与光谱分析)，2011，31(8)：2021.
[13] Blasco J，Aleixos N，Gomez J，et al. Journal of Food Engineering，2007，83(3): 384.
[14] Devrim Unay，Bernard Gosselin，Olivier Kleynen，et al. Computers and Electronics in Agriculture，2011，75(1)：204.
[15] Qin Jiangwei，Burks Thomas F，Zhao Xuhui，et al. Journal of Food Engineering，2012，108: 87.
[16] Kim M S，Chen Y R，Cho B K. Sens. & Instrumen. Food Qual，2007，1: 151.