NaYF<sub>4</sub>:Yb, Er/CDs纳米复合物用于肤纹印痕的双模式荧光增强显现

doi:10.3964/j.issn.1000-0593(2025)09-2526-09

Abstract
References
Related Citation (15)

Download: PDF (72000 KB)
Export: BibTeX | EndNote (RIS)

Abstract Skin-print development, as one of the essential technologies in the field of forensic science, is the basic premise for skin-print analysis and identification. Based on the research achievements of latent finger-print development using fluorescent nanomaterials, this paper puts forward a method of skin-print development followed by a strategy of dual-mode fluorescent enhancement using the nanocomposite (NCs) composed of rare earth doped up-conversion fluorescent nanomaterials (UC NMs) and carbon dots (CDs), to improve the quality of skin-print development. NaYF₄:Yb, Er UC NMs and CDs down-conversion (DC) fluorescent NMs were respectively synthesized by thermal decomposition method and solvothermal method, then NaYF₄:Yb, Er/CDs NCs with both UC and DC fluorescent properties were thus formed by loading the CDs onto the surface of NaYF₄:Yb, Er NMs. Through optimization, the doping ratio of the CDs suspension to NaYF₄:Yb, Er powder was determined to be 0.017 5 μL·mg^-1. The as-prepared NCs were quasi-spherical in shape, with an average diameter of 22.2 nm, and were modified with carboxyl groups on their surface. The characteristic peaks assigned to NaYF₄:Yb, Er, and CDs appeared in both the Raman spectrum and the X-ray diffraction spectrum of NaYF₄:Yb, Er/CDs NCs. The NCs exhibited an ultraviolet (UV) absorption peak at 359 nm and displayed a DC fluorescent emission at 468 nm upon excitation with 365 nm UV light. Additionally, the NCs exhibited a near-infrared (NIR) absorption peak at 977 nm, which could produce three UC fluorescent emissions at 520, 540, and 654 nm upon excitation with 980 nm NIR light. In addition, it was confirmed that both the CDs suspension and the NaYF₄:Yb, Er/CDs powder exhibit wavelength-dependent excitation properties. The as-prepared NCs were subsequently used for powder-dusting development, followed by dual-mode fluorescence enhancement of latent skin prints, including fingerprints, palm prints, footprints, lip prints, and pinna prints. Experimental results showed that, excited with 365~415 nm light under DC fluorescence enhancement mode, the skin-print could emit seven colors of fluorescence, including red, orange, yellow, yellow-green, green, blue-green, and blue; excited with 980 nm light under UC fluorescence enhancement mode, the skin-print could emit green fluorescence. After powder-dusting development and fluorescence enhancement, a strong contrast between the developing signal and background noise could be achieved, allowing for well-defined outlines, coherent ridges, and clear minutiae to be obtained. Additionally, a strong contrast between papillary ridges and furrows could be observed. The skin-print development and enhancement using NaYF₄:Yb, Er/CDs NCs proposed in this study was proved to be suitable for dealing with the skin-prints on smooth objects with high sensitivity, contrast, and selectivity.

Key words：Fingerprint development;Nanomaterials;Rare earth;Upconversion;Carbon dots;Fluorescence

Received: 2025-04-02 Accepted: 2025-06-25

ZTFLH:

O657.3

Corresponding Authors: WANG Meng E-mail: mengwang@alum.imr.ac.cn

Cite this article:

LI Wei-lin,WANG Meng,XU Ying, et al. Dual-Mode Fluorescence Enhancement of Skin-Print Using NaYF₄:Yb, Er/CDs Nanocomposites[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2025, 45(09): 2526-2534.

URL:

https://www.gpxygpfx.com/EN/10.3964/j.issn.1000-0593(2025)09-2526-09 OR https://www.gpxygpfx.com/EN/Y2025/V45/I09/2526

[1] Xu L R, Zhang C Z, He Y Y, et al. Science China—Chemistry, 2015, 58(7): 1090.
[2] Su B. Analytical and Bioanalytical Chemistry, 2016, 408(11): 2781.
[3] Litter M I, Ahmad A. Industrial Applications of Nanoparticles: a Prospective Overview. Florida: CRC Press, 2023.
[4] Menzel E R, Savoy S M, Ulvick S J, et al. Journal of Forensic Sciences, 2000, 45(3): 545.
[5] Leggett R, Lee-Smith E E, Jickells S M, et al. Angewandte Chemie—International Edition, 2007, 46(22): 4100.
[6] Hazarika P, Jickells S M, Wolff K, et al. Angewandte Chemie—International Edition, 2008, 47(52): 10167.
[7] Saif M. Journal of Luminescence, 2013, 135: 187.
[8] Wang J, Wei T, Li X Y, et al. Angewandte Chemie—International Edition, 2014, 53(6): 1616.
[9] Fernandes D, Krysmann M J, Kelarakis A. Chemical Communications, 2015, 51(23): 4902.
[10] Sharma V, Das A, Kumar V, et al. Journal of Materials Science, 2014, 49(5): 2225.
[11] Peng D, Wu X, Liu X, et al. ACS Applied Materials & Interfaces, 2018, 10(38): 32859.
[12] Liang K, Carbonell C, Styles M J, et al. Advanced Materials, 2015, 27(45): 7293.
[13] Li Y, Xu L R, Su B. Chemical Communications, 2012, 48(34): 4109.
[14] Ran X, Wang Z Z, Zhang Z J, et al. Chemical Communications, 2016, 52(3): 557.
[15] WANG Meng, JU Jin-sheng, ZHU Zhong-xu, et al(王猛, 鞠金晟, 朱中旭, 等). Scientia Sinica Chimica(中国科学: 化学), 2019, 49(12): 1425.
[16] Wang M, Li M, Yu A Y, et al. Advanced Functional Materials, 2017, 27(14): 1606243.
[17] LI Ming, NI Long, WANG Meng, et al(李明, 倪龙, 王猛, 等). Spectroscopy and Spectral Analysis (光谱学与光谱分析), 2021, 41(9): 2670.
[18] Li J C, Zhu X J, Xue M, et al. Inorganic Chemistry, 2016, 55(20): 10278.
[19] Shahi P K, Singh P, Singh A K, et al. Journal of Colloid and Interface Science, 2017, 491: 199.
[20] FAN Wen-zhuo, YU Zhuo-hong, WANG Meng, et al(范文卓, 于卓弘, 王猛, 等). Chinese Journal of Analytical Chemistry(分析化学), 2024, 52(4): 492.
[21] Wang M, Li M, Yang M Y, et al. Nano Research, 2015, 8(6): 1800.
[22] Mai H X, Zhang Y W, Si R, et al. Journal of American Chemical Society, 2006, 128(19): 6426.
[23] Miao X, Qu D, Yang D X, et al. Advanced Materials, 2018, 30(1): 1704740.
[24] Jelinek R. Carbon Quantum Dots Synthesis, Properties and Applications. Alabama: Springer, 2017.
[25] Lu W B, Qin X Y, Liu S, et al. Analytical Chemistry, 2012, 84(12): 5351.
[26] Bataal S K, Pradhan B, Mohanta K, et al. Carbon Quantum Dots for Sustainable Energy and Optoelectronics. Massachusetts: Woodhead Publishing, 2023.
[27] Wang R N, Huang Z H, Ding L F, et al. ACS Applied Nano Materials. 2022, 5(2): 2214.