XPS Analysis of CO2 Corrosion Product Scales on P110 Steel
LIN Guan-fa1, 2,ZHENG Mao-sheng1,BAI Zhen-quan1,ZHAO Xin-wei2
1. School of Material Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, China 2. Key Laboratory for Mechanical and Environmental Behavior of Tubular Goods, CNPC, Xi'an 710065, China
Abstract:In order to confirm the composition of CO2 corrosion product scale and the difference of both component and the content between various layers of the scale, autoclave was employed to prepare the scales on P110 steel exposed to carbon dioxide corrosion. The surface and cross-section morphology were observed with scanning electron microscope (SEM), and the difference between surface and inner in chemical composition was analyzed with X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) used adjectively. The results show that the cross-section of the corrosion product scales of P110 steel is with double-layer structure, and there are mainly FeCO3 and a little of CaCO3 with ferreous oxides in two layers structure of the scale. The amount of CaCO3 in surface layer is less than one in inner layer, but the oxides are slight more than that in inner layer including a little intermixtures of Fe and Fe3C. It is concluded from the difference of Ca2+ ion between the surface and the inner that the inner corrosion scale produces first on P110 steel in corrosion process.
[1] Crolet J L. Working Party Report, Institute of Materials, London, 1994. 1. [2] de Waard C, Millliams D E. Corrosion, 1975, 31: 177. [3] Dayalan E, Vani G, Shadley J R, et al. Corrosion/95, NACE International, 1995, No. 118. [4] CHEN Chang-feng, LU Min-xu, ZHAO Guo-xian, et al(陈长风, 路民旭, 赵国仙, 等). Acta Metallurgica Sinica(金属学报), 2002, 38: 411. [5] LIN Guan-fa, BAI Zhen-quan, ZHAO Xin-wei, et al(林冠发, 白真权, 赵新伟, 等). Acta Petroleum Sinica(石油学报), 2004, 25(3): 101. [6] Hausler R H, Stegmann D W. Corrosion/88, NACE, 1988, No. 863. [7] Dugstad A. Corrosion/92, Houston, TX, NACE, 1992, No. 14. [8] WU Nai-jun, WANG Su-fang, WANG Zhan-wen, et al(吴乃钧, 王素方, 王占文, 等). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 1994, 14(5): 99. [9] WANG Li, WANG Xiu-li, HOU Yu, et al(王 力, 王秀丽, 侯 煜, 等). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2004, 24(5): 613. [10] XU Yi, TANG Shou-yuan, ZHANG Xiao-feng(徐 溢, 唐守渊, 张晓凤). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2004, 24(4): 495. [11] ZHANG Lei(张 蕾). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2004, 24(11): 1432. [12] Palacios C A, Shadley J R. Corrosion, 1991, 47: 122. [13] Ikeda A, Ueda M. Predicting CO<sub>2</sub> Corrosion in the Oil and Gas Industry. London: The Institute of Materials, 1994. 59. [14] Wu S L, Cui Z D, He F, et al. Materials Letters, 2004, 58: 1076. [15] Heuer J K, Stubbins J F. Corrosion Science, 1999, 41: 1231.