Research on On-line Detection of Plasma Spectroscopy in Laser Cleaning of the Carbon Fiber Reinforced Polymer
TONG Yan-qun1, ZHANG Ang1, FU Yong-hong1, YAO Hong-bing1, ZHOU Jian-zhong1, CHEN Xiao-ming2, REN Xu-dong1*
1. School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, China
2. Key Laboratory of Surface Engineering Technology for Water Resources and Hydropower Equipment in Zhejiang Province, Hangzhou 310012, China
Abstract:In recent years, carbon fiber reinforced polymer (CFRP) has received extensive attention in the industrial field, due to its excellent performance. Laser cleaning technology for pretreatment of carbon fiber reinforced polymer is beneficial to the improvement of the surface properties and the bonding strength of the interface. The technology of detection assessment is the key to ensuring the quality of laser cleaning, and the core of the automation and the integration of laser cleaning device. Laser induced plasma spectroscopy can quickly analyze the changes of surface elements and realize the on-line detection of surface state of laser cleaning. It has a wide application prospect in the field of laser cleaning. In this paper, laser pulse which was produced by Nd:YAG pulse laser, with a wavelength of 1 064 nm,was used to induce plasma under the condition of room temperature and atmospheric pressure. Modified ME5000 grating spectrometer was used to collect the plasma spectrum. Laser induced plasma spectroscopy was used to detect the process of laser cleaning of carbon fiber reinforced polymer online. The plasma spectrum of air was obtained, and the influence of plasma spectrum was investigated. It was found that the spectrum of 350~700 nm can be used to analyze the surface composition of CFRP. The surface morphology observed by electron scanning microscope and the elements measured by X-ray electron spectroscopy were used to characterize the detection results of plasma spectrum. In order to obtain the threshold of removing the surface material completely of carbon fiber reinforced polymer, the plasma spectrograms under different laser energy and different cleaning times were collected. The relationship between laser cleaning quality and the main elements and their intensity changes of plasma spectrum were studied. The results showed that the 393.3 nm S (Ⅱ) and 589.5 nm S (Ⅱ) lines can effectively characterize the surface cleaning quality of carbon fiber reinforced polymer in the plasma spectrogram. The cleaning threshold of single laser to remove the surface material completely is 10.68 mJ. Low laser energy can remove epoxy resin more than once. High laser energy can remove the surface resin with single laser, but multiple cleaning will damage the carbon fiber. These results provide basis and technical support for the intelligent integrated application of laser cleaning carbon fiber composites.
佟艳群,张 昂,符永宏,姚红兵,周建忠,陈小明,任旭东. 碳纤维复合材料的激光清洗等离子体光谱在线检测研究[J]. 光谱学与光谱分析, 2019, 39(08): 2388-2394.
TONG Yan-qun, ZHANG Ang, FU Yong-hong, YAO Hong-bing, ZHOU Jian-zhong, CHEN Xiao-ming, REN Xu-dong. Research on On-line Detection of Plasma Spectroscopy in Laser Cleaning of the Carbon Fiber Reinforced Polymer. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2019, 39(08): 2388-2394.
[1] Fischer F, Kreling S, JãSchke P, et al. Journal of Adhesion, 2012, 88(4): 350.
[2] Palmieri F L, Belcher M A, Wohl C J, et al. International Journal of Adhesion & Adhesives, 2013, 68: 554.
[3] Schweizer M, Meinhard D, Ruck S, et al. Journal of Adhesion Science & Technology, 2017: 1.
[4] Nattapat M, Marimuthu S, Kamara A M, et al. Advanced Manufacturing Processes, 2015, 30(12): 1450.
[5] Litchfield R E, Critchlow G W, Wilson S. International Journal of Adhesion & Adhesives, 2006, 26(5): 295.
[6] Delmdahl R, Brune J, Pätzel R. Powder Metallurgy & Metal Ceramics, 2016, 55(1): 1.
[7] YAO Hong-bing, YU Wen-long, LI Ya-ru, et al(姚红兵,于文龙,李亚茹,等). Acta Photonica Sinica(光子学报), 2013, 42(11): 1295.
[8] Colao F, Fantoni R, Lazic V, et al. Journal of Analytical Atomic Spectrometry, 2004, 19(4): 502.
[9] Klein S, Hildenhagen J, Dickmann K, et al. Journal of Cultural Heritage, 2000, 1(1): S287.
[10] Brania A, Imam H, Elsayed K, et al. Egyptian Journal of Archaeological and Restoration Studies, 2011, 1(2): 1.
[11] Ledesma R, Palmieri F, Connell J, et al. Spectrochimica Acta Part B:Atomic Spectroscopy, 2018, 140: 5.
[12] CHEN Lin, DENG Guo-liang, FENG Guo-ying, et al(陈 林,邓国亮,冯国英,等). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2018, 38(2): 367.