Abstract：A method was studied for the analysis of Cr, As, Cd, Hg and Pb in acrylonitrile-butadiene-styrene copolymer by using ICP-MS. The instrument parameters were optimized and the introduction system was developed systematically. The sample is decomposed by microwave digestion. The digestion condition was optimized concerning digestion system, proportion of acids and digestion procedure, which affords reference for the preparation of the same kinds of polymer samples. The detection limits of the method for all sample elements were 0.7-6.5 ng·g-1,the recoveries were 89.8%-110.8%, and the RSDs were 2.8%-11.3%. The analytical method presented was characterized with good precision and accuracy, simplicity, rapidness, low limits of detection and no matrix matching requirements.
[1] MA Yong-hong, QIN Yan-li, SHEN Lian(马永红, 秦琰瓅, 沈 炼). China Plastics(中国塑料),2004, 18(3): 1. [2] ZHENG Yong-jun, ZHAO Bin, YOU Jin-mao(郑永军, 赵 斌, 尤进茂). Spectroscopy and Spectral Analysis(光谱学与光谱分析),2006,26(6): 1155. [3] Jarvis K E, Gray A L, Houk R S(贾维斯 K E，格雷 A L，霍克 R S). Handbook of Inductively Coupled Plasma Mass Spectrometry(电感耦合等离子体质谱手册). Translated by YAN Ming, LI Bing(严 明，李 冰，译). Beijing: Atomic Energy Press(北京: 原子能出版社), 1997. 121.
