Abstract：In order to develop the cheap and efficient photocatalysts, kaolins were modified through calcination and acid leaching. In succession, the prepared samples were characterized using thermal gravimetric-differential thermal analysis (TG-DTA), scanning electron microscope (SEM) coupled with energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-Vis) and BET specific surface area measurements (BET). Methyl orange, used as a model reactant, was degraded under UV light irradiation to evaluate the photocatalytic activities of the prepared samples. From UV-Vis spectroscopy analyses, an obvious increase in the red shift of the absorption edge was observed for the samples treated with acid. The acid sites generated during the modification of kaolin were determined through adsorbed pyridine analysis using infrared spectroscopy (Py-IR). Kaolins modified using over 30% H2SO4 contained both Brnsted and Lewis acid sites. Combining the results of photocatalytic experiment with the conclusions of Py-IR and XRD, the acid properties of the prepared samples were the main factors that affected their catalytic activity.
[1] Gad-Allah T A, Kato S, Satokawa S, et al. Desalination, 2009, 244: 1. [2] Anbia M, Hariri S A, Ashrafizadeh S N. Applied Surface Science, 2010, 256: 3228. [3] CUI Hua-nan, ZHAO Zhen-hua, LIANG Ye-ru, et al(崔华楠, 赵振华, 梁业如, 等). Chinese Journal of Catalysis(催化学报), 2011, 32(2): 321. [4] Andronic L, Duta A. Materials Chemistry and Physics, 2008, 112: 1078. [5] Damardji B, Khalaf H, Duclaux L, et al. Applied Clay Science, 2009, 44: 201. [6] SHENG Guo-dong, LI Jia-xing, WANG Suo-wei, et al(盛国栋, 李家星, 王所伟, 等). Progress in Chemistry(化学进展), 2009, 21(12): 2492. [7] WANG Huan-ying, LI Wen-jun, CHANG Zhi-dong, et al(王环颖, 李文军, 常志东, 等). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2011, 31(9): 2529. [8] Visa M, Carcel R A, Andronic L, et al. Catalysis Today, 2009, 144: 137. [9] LI You-ji, SONG Zhi-juan, LI Zhi-ping, et al(李佑稷, 宋智娟, 李志平, 等). Chemical Journal of Chinese Universities(高等学校化学学报), 2007, 28(9): 1710. [10] Kibanova D, Trejo M, Destaillats H, et al. Applied Clay Science, 2009, 42: 563. [11] Kun R, Mogyorósi K, Dékány I. Applied Clay Science, 2006, 32: 99. [12] Mamulová Kutláková K, Tokarsk J, Ková P. Journal of Hazardous Materials, 2011, 188: 212. [13] Subrahmanyam M, Boule P, Durga Kumari V, et al. Solar Energy, 2008, 82: 1099. [14] Lei S, Gong W, Bai C, et al. Journal of Wuhan University of Technology-Materials Science Edition, 2006, 21(4): 12. [15] Chong M N, Lei S, Jin B, et al. Separation and Purification Technology, 2009, 67: 355. [16] WANG You-he, LI Xiang, LIU Xin-mei, et al (王有和, 李 翔, 刘欣梅, 等). Chinese Journal of Inorganic Chemistry (无机化学学报), 2009, 25(3): 533. [17] Tian H, Ma J, Li K, et al. Materials Chemistry and Physics, 2008, 112: 47. [18] Gao J, Li S, Yang W, et al. Rare Metals, 2007, 26: 1. [19] Yu J, Yu H, Cheng B, et al. Journal of Molecular Catalysis A: Chemical, 2006, 253: 112. [20] Liu S, Xie C, Yu S, et al. Chinese Journal of Catalysis, 2009, 30: 401. [21] LIN Jin(林 进). Chinese Journal of Organic Chemistry(有机化学), 2000, 20(5): 805. [22] SU Wen-yue, FU Xian-zhi, WEI Ke-mei(苏文悦, 付贤智, 魏可镁). Acta Physico-Chimica Sinica(物理化学学报), 2001, 17(1): 28. [23] Chen D, Ray A K. Chemical Engineering Science, 2001, 56: 1561.
