Research on the Combustion Mechanism of Asphalt and the Composition of Harmful Gas Based on Infrared Spectral Analysis
WU Ke1, ZHU Kai2, HUANG Zhi-yi1, WANG Jin-chang1*, YANG Qin-min3, LIANG Pei4
1. College of Civil Engineering and Architecture, Zhejiang University,Hangzhou 310027, China 2. Department of Energy Engineering, Zhejiang University,Hangzhou 310027, China 3. Department of Control Science and Engineering, Zhejiang University,Hangzhou 310027, China 4. China Jiliang University,Hangzhou 310018, China
Abstract:By using the Rosemount gas analyzer and the test platform of fixed bed built by carbon furnace, the harmful gaseous compositions and the release rules of asphalt and mortar under high temperature rate were analyzed quantitatively based on infrared spectral analysis technology. The results indicated that the combustion process of the asphalt and mortar can be approximately divided into two stages stage of primary volatile combustion, and stage of secondary volatile release combined with fixed carbon combustion in isothermal condition with high heating rate. The major gaseous products are CO2, CO, NO, NO2 and SO2. the volatile content is one of the key factors affecting the release rules of gaseous combustion products in asphalt, and reducing the volatile content in asphalt materials can effectively reduce the generation of gaseous combustion products, especially CO.
Key words:Fixed bed combustion reaction experiment;Infrared spectral analysis;Asphalt
吴 珂1,朱 凯2,黄志义1,王金昌1*,杨秦敏3,梁 培4 . 基于红外光谱研究沥青燃烧机理和有害气体成分分析 [J]. 光谱学与光谱分析, 2012, 32(08): 2089-2094.
WU Ke1, ZHU Kai2, HUANG Zhi-yi1, WANG Jin-chang1*, YANG Qin-min3, LIANG Pei4 . Research on the Combustion Mechanism of Asphalt and the Composition of Harmful Gas Based on Infrared Spectral Analysis . SPECTROSCOPY AND SPECTRAL ANALYSIS, 2012, 32(08): 2089-2094.
[1] Tekalur S A, Shukla A, Sadd M, et al. Construction and Building Materials, 2009, 23(5): 1795. [2] Xiao F P, Amirkhanian S N. Materials and Structures, 2010, 43(1-2): 223. [3] Abolfazl Z S, Ali S, Salman E N. Construction and Building Materials, 2010, 24(7): 1239. [4] Asi I M. Building and Environment, 2007, 42(1): 325. [5] HUANG Jian, HAO Zhi-biao, ZOU Wu, et al(黄 剑, 郝志彪, 邹 武,等). Journal of Inorganic Materials(无机材料学报), 2010, 25(3): 321. [6] LI Hai-liang, LI He-jun, LU Jin-hua, et al(李海亮, 李贺军, 卢锦花,等). Journal of Inorganic Materials (无机材料学报), 2011, 26(2): 197. [7] Yu J Y, Cong P L, Wu S P. Construction and Building Materials, 2009, 23(6): 2277. [8] Al-Hadidy A I, Tan Y Q. Construction and Building Materials, 2009, 23(3): 1456. [9] Alarie Y. Critical Reviews in Toxicology, 2002, 32(4): 259. [10] Wu S P, Cong P L, Yu J Y, et al. Fuel, 2006, 85(9): 1298. [11] Chen D H, Zhang H P, Zheng Q K, et al. Polymers for Advanced Technologies, 2008, 19(9): 1353. [12] Wu S P, Mo L T, Cong P L, et al. Fuel, 2008, 87(1): 120. [13] Mothé M G, Leite L F M, Mothé C G. Journal of Thermal Analysis and Calorimetry, 2008, 93(1): 105. [14] Xu T, Huang X M. Journal of Analytical and Applied Pyrolysis, 2010, 87(2): 217. [15] Xu T, Huang X M. Fuel, 2010, 89(9): 2185. [16] WU Ke, HUANG Zhi-yi, XU Xing(吴 珂, 黄志义, 徐 兴). China Journal of Highway and Transport(中国公路学报), 2009, 22(2): 77.