The Analysis of Spectral Characteristics of Reflective Thermal Insulation Coatings for Buildings Based on Hyperspectral Data
LI Xiao-fang1, YANG Wei3, WANG Li-mei1, WANG Yan-cang2*, LI Xiao-peng1, ZHANG Guo-dong1
1. Langfang Normal University，Langfang 065000，China
2. North China Institute of Aerospace Engineering，Langfang 065000, China
3. Beijing Aerospace Automatic Control Institute, Beijing 100038，China
Abstract：Reflective thermal insulation coatings are a new type of building materials, which have the functions of heat insulation, energy saving and environmental protection, and have been widely used in external structures of buildings. The performance of reflective thermal insulation coatings is mainly determined by their interaction with solar radiation, that is, the reflective and absorptive capacity of reflective thermal insulation coatings can directly reflect the advantages and disadvantages of their thermal insulation and thermal insulation performance. For specific reflective heat insulation coatings, the spectral characteristics of reflective heat insulation coatings mainly depend on their construction thickness parameters. The variation of construction thickness can directly affect the spectral characteristics of reflective heat insulation coatings, and the variation of construction thickness has a great impact on its construction efficiency. Therefore, the variation of spectral characteristics of reflective heat insulation coatings with thickness parameters is explored to determine the best reflective heat insulation coatings. Construction thickness has important practical and theoretical significance for reducing consumption of materials and optimizing construction technology. In order to quantitatively analyze the influence of construction thickness parameters on the spectral characteristics of reflective heat insulating coatings, the spectral data of the thickness of five types of coatings, 0, 0.5, 1.0, 1.5 and 2.0 mm, were used as data sources. The spectral data were processed and analyzed by the methods of de-envelope, absorption peak depth and subtraction, and the effect rules of thickness parameters on reflective and absorption properties of reflective heat insulating coatings were quantitatively analyzed. The results show that: (1) except for ultraviolet-blue light, the reflectivity of coatings to light decreases with the increase of wavelength, that is, coatings have strong reflectivity to short wave band and strong absorption to long wave band, which indicates that coatings have certain thermal insulation and thermal insulation properties; (2) the increase of coatings thickness helps to improve the thermal insulation performance of coatings, but it is helpless. In order to enhance the thermal insulation performance of coatings, the increase of thickness is helpful to enhance the reflectivity of coatings, but the increase of reflectivity of coatings increases first and then decreases, and the change of absorption peak depth increases first and then decreases. When the thickness reaches 1.0 mm, the reflectivity of coatings tends to be saturated; (3) the thickness of coatings has a significant effect on the depth of absorption Valley and has an effect on absorption. Valley (peak) position plays an important role. When the coating thickness reaches 1.0 mm, the absorption Valley (peak) waveform changes.
李笑芳，杨 威，王丽玫，王延仓，李晓鹏，张国栋. 基于高光谱数据定量分析建筑反射隔热涂料光谱特性[J]. 光谱学与光谱分析, 2020, 40(05): 1420-1424.
LI Xiao-fang, YANG Wei, WANG Li-mei, WANG Yan-cang, LI Xiao-peng, ZHANG Guo-dong. The Analysis of Spectral Characteristics of Reflective Thermal Insulation Coatings for Buildings Based on Hyperspectral Data. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2020, 40(05): 1420-1424.
[1] ZHANG Zhi, GAO Jin, LI Xiao-gang(张 志, 高 瑾, 李晓刚). New Building Materials(新型建筑材料), 2018, 45(12): 76.
[2] Hao Q, Li W, Xu H, et al. Advanced Materials, 2018, 30(10): 1705421.
[3] Zhang P, Tang J, Tang Q, et al. Chinese Journal of Chemical Engineering, 2018, 3: 1192.
[4] MA Yi-ping, LI Kui, WANG Cui, et al(马一平, 李 奎, 王 翠, 等). Journal of Tongji University·Natural Science(同济大学学报·自然科学版), 2017, 45(2): 249.
[5] XU Jin-bao, DU Pei-yi, ZHONG Guo-lun, et al(徐金宝, 杜丕一, 钟国伦，等). Paint & Coatings Industry(涂料工业), 2017, 47(5): 69.
[6] YANG Guang, DENG An-zhong, CHENG Jing-bo(杨 光, 邓安仲, 陈静波). Surface Technology(表面技术), 2017, 46(11): 269.
[7] XU Yi, PENG Xiao-guang, YANG Hui, et al(徐 意，彭晓光，杨 辉，等). New Building Materials(新型建筑材料), 2016(2): 24.
[8] JIANG Shuo, JIANG Quan, SUN Long-fei(姜 硕, 蒋 荃, 孙飞龙). New Building Materials(新型建筑材料), 2019, 46(2): 92.
[9] WANG Hai-long, DIAO Yong-fa, SU Xiang, et al(汪海龙, 刁永发, 苏 翔，等). Environmental Engineering(环境科学), 2016, 36(8): 943.
[10] QIU Tong, WANG Guo-jian, NI Gang(邱 童, 王国建, 倪 钢). New Building Materials(新型建筑材料), 2017, 44(4): 113.
[11] Yuan L, Han A, Ye M, et al. Solar Energy, 2018, 163: 453.
[12] Ghasemi R, Vakilifard H. Ceramics International, 2017，(3): 1.
[13] Levinson R, Chen S, Ferrari C, et al. Energy and Buildings, 2017，152(10): 1.
[14] Yuki Itoh, Akira Iwasaki. IGARSS 2013—2013 IEEE International Geoscience and Remote Sensing Symposium, 2013，(7): 445.
[15] DING Yong-jun, SUN Jing-jing, SUN Hong, et al(丁永军，张晶晶，孙 红，等). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2017, 37(1): 194.
