|
|
|
|
|
|
Spectroscopic Analysis of Activated Carbon Mixed with Steel Slag Composite Material in Sintering Flue Gas of Desulfurization and Denitration |
ZHANG Hao1,2, FAN Wei-wei1 |
1. School of Civil Engineering and Architecture, Anhui University of Technology, Ma’anshan 243032, China
2. Key Laboratory of Metallurgical Emission Reduction & Resources Recycling (Anhui University of Technology), Ministry of Education, Ma’anshan 243002, China |
|
|
Abstract Steel slag tailings are the main solid waste in metallurgical industry, with the production of 15%~20% of crude steel. The utilization ratio is quite low and only reaches 10% of steel slag tailings production due to limited technology. Meanwhile, steel slag tailings are disposed in direct stacking and landfill in general since the management system is not perfect, which pollutes land source, underground water source and air quality. Recycling of solid waste is one important method to achieve sustainable development of resources. The main chemical compositions are CaO, SiO2, Al2O3, MgO, Fe2O3, MnO, f-CaO, etc. In the face of the above problems, the development of low price and superior performance of activated carbon mixed with steel slag composite material has become not only one of main methods to achieve the high value-added utilization of metallurgical solid waste and the sustainable development of resources, but also one of main methods to achieve the great reduction of the production cost of modified activated carbon and improve economic benefits. In this paper, activated carbon and steel slag were studied firstly, and activated carbon mixed with steel slag composite material for sintering flue gas of desulfurization and denitration was prepared by metal oxides contained in the steel slag were modified to treat the activated carbon, and desulfurization and denitration performance of activated carbon mixed with steel slag composite material was tested by setting up the experimental reaction device. Chemical component of steel slag was characterized and analyzed by X-ray fluorescence spectrometer (XRF), pore structure of activated carbon mixed with steel slag composite material was characterized and analyzed by specific surface area and pore size distribution analyzer (BET), composition structure of steel slag was characterized and analyzed by Fourier transform infrared spectrometer (FTIR) and microstructure of activated carbon mixed with steel slag composite material was characterized and analyzed by scanning electron microscope (SEM), so as to reveal the mechanism of preparing activated carbon mixed with steel slag composite material from activated carbon and steel slag, and the degradation mechanism of desulfurization and denitration in sintering flue gas by activated carbon mixed with steel slag composite material. The results show that the activated carbon mixed with steel slag composite material (steel slag is layer pouring slag from electric furnace, mass ratio of steel slag to activated carbon is 2:4 and fineness of steel slag and activated carbon is 400 mesh) has good properties of desulfurization and denitration and reasonable economy with desulfurization efficiency of 100% and denitration efficiency of 58%. The porous structure of activated carbon mixed with steel slag composite material adsorbed SO2 and NO, and Fe2O3 and MnO2 in steel slag promote the catalytic reduction reaction of activated carbon functional groups to improve the properties of desulfurization and denitration, where adsorption is the leading and prerequisite, and catalytic reduction reaction is auxiliary and synergistic. It aims to provide a new way for the utilization of high value-added steel slag, and achieve the target of waste management waste and waste to increase efficiency in iron and steel enterprise.
|
Received: 2019-03-29
Accepted: 2019-07-30
|
|
|
[1] Zhang H,Fang Y. Journal of Alloys and Compounds,2019, 781: 201.
[2] ZHANG Hao(张 浩). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2017, 37(2): 412.
[3] Fang N J, Guo J X, Shu S, et al. Fuel, 2017, 202: 328.
[4] Alessandro O D’, Thomas H, Sambeth J E. Reaction Kinetics Mechanisms & Catalysis, 2014, 113(1): 257.
[5] Yao G H, Gui K T, Wang F. Chemical Engineering & Technology, 2010, 33(7): 1093.
[6] Jie D, Qin Z, Zhang S. Journal of Molecular Catalysis A Chemical, 2014, 393(18): 222.
[7] ZHANG Hao, WANG Lin, LONG Hong-ming(张 浩,王 林,龙红明). Spectroscopy and Spectral Analysis(光谱学与光谱分析),2018, 38(7): 2302.
[8] Ramezanianpour A A, Kazemian A, Moghaddam M A, et al. Materials & Structures, 2016, 49(7): 2597.
[9] Morel F, Bounor-Legaré V, Espuche E, et al. European Polymer Journal, 2012, 48(5): 919. |
[1] |
HE Xiong-fei1, 2, HUANG Wei3, TANG Gang3, ZHANG Hao3*. Mechanism Investigation of Cement-Based Permeable Crystalline Waterproof Material Based on Spectral Analysis[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2021, 41(12): 3909-3914. |
[2] |
ZHANG Hao1, 2, 4, LI Hai-li1, LONG Hong-ming2, 4, LIU Zi-min3, ZHANG Yao-hui3, ZHENG Wei-cheng4. Spectroscopic Analysis of Reinforcing-Flame Retardant Mechanism of Modified Steel Slag-Mineral Powder Composite Rubber Filler[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2021, 41(04): 1138-1143. |
[3] |
SHI Qi1, DING Long1, LONG Hong-ming1,2*, CHUN Tie-jun1. Study on Catalytic Combustion of Dioxins From Iron Ore Sintering Flue Gas Over Ce-V-Ti Catalysts by XRD and FTIR[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2021, 41(01): 327-332. |
[4] |
LIU Xiu-yu, ZHANG Bing, ZHANG Hao, DU Xiao-yan, TANG Gang*. Research of Flame Retardant Mechanism for RPUF/EG Composites Based on TG-FTIR and XPS[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2020, 40(05): 1626-1633. |
[5] |
ZHANG Hao1,2, GAO Qing1, HAN Xiang-xiang1, RUAN Gao-yang1, LIU Xiu-yu1. Mechanism Analysis of Formaldehyde Degradation by Hot Braised Slag Modified Activated Carbon Based on XRF and XRD[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2020, 40(05): 1447-1451. |
[6] |
ZHANG Hao1, 2, 3, ZHANG Lei3, LONG Hong-ming1, 2*. Spectroscopic Analysis of Preparation of Ecological Activated Carbon Based on Electric Furnace Slag Ultrafine Powder Modified Biomass Waste Material[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2020, 40(03): 861-866. |
[7] |
WANG Hao1, 2, JIN Bao-sheng1*, WANG Xiao-jia1, YU Bo2, CAO Jun1, Lü Dong-qiang2. Research of Texture Structure for Coke Layer in Ascension Pipe of Coke Oven Based on SEM and XPS[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2019, 39(11): 3333-3339. |
[8] |
WANG Hao1, 2, JIN Bao-sheng1*, WANG Xiao-jia1, YU Bo2, CAO Jun1. Spectroscopical Analysis and Coking Mechanisim of Char Layer in Ascension Pipe of Coke Oven[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2019, 39(10): 3148-3153. |
[9] |
ZHANG Chen-ling, HAN Mei, JIA Na, LIU Bing-bing, LIU Jia*, WANG Zhen-xing, LIU Ling-xia. A Study on Adsorption of Cd on Activated Carbon Fiber by Using ICP-OES[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2019, 39(03): 931-936. |
[10] |
ZHANG Hao1, 2, LIU Xiu-yu1, LIU Ying1. Study on Physical Excitation Mechanism of Steel Slag Tailings by XRD and SEM[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2019, 39(03): 937-941. |
[11] |
LI Ruo-meng1, CHEN Tao1*, LI Wei2, ZHAO Xiao-zhen3. Spectroscopy Analysis on Orthopyroxene Megacrysts in Heilongjiang Muling Area[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2019, 39(01): 156-160. |
[12] |
ZHANG Hao1, 2, 3, ZHANG Xin-yu3, LONG Hong-ming1, 2, 3*. Spectroscopic Analysis of Weak Acid Modified Steel Slag Powder[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2018, 38(11): 3502-3506. |
[13] |
ZHANG Hao1, 2, 5, WANG Lin3, LONG Hong-ming2, 4, 5. Study on Composite Activating Mechanism of Alkali Steel Slag Cementations Materials by XRD and FTIR[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2018, 38(07): 2302-2306. |
[14] |
CHEN Hua1, 2, LI Hui1, DONG Shuo2, GU Heng-xing1, 2, YANG Gang1, 2, XU De-long1. X-Ray Diffraction (XRD) and X-Ray Fluorescence (XRF) Analysis of Steel Slags in Different Treatment Process and Active Index Prediction Model[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2017, 37(08): 2590-2593. |
[15] |
YANG Gang1,2, LI Hui1, CHENG Dong-bo2, XU De-long1, CHEN Hua1, GU Heng-xing1 . Effect Soft Measurement Model of Steel Slag Powder Repair Heavy Metal Contaminated Soil with Fourier Transform Infrared Spectrum [J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2017, 37(03): 743-748. |
|
|
|
|