|
|
|
|
|
|
| Effect of Environment and Medium on Temperature Measurement |
| WANG Zi-xuan, WU Jian, DAI Chang-jian* |
| School of Science, Tianjin University of Technology, Tianjin 300384, China |
|
|
|
|
Abstract An academic model and a kind of experimental method are built in this paper to efficiently revise influence on results from surroundings and medium in thermometry.This revised method, taking into consideration of the attenuation coefficient of the irradiator from its surrounding, can dramatically improve the precision and universality of thermometry technology based on gray-body. First, accurate fingerprint spectrum of the irradiator in given airborne is obtained via using the multichannel CCD image spectrometer, which is made equivalent to a gray-body model at the same time make it. Then, this irradiator is put into an uncharted environment and medium to measure its radiation spectrum repeatedly.Besides, a gray-body model which contains attenuation properties from determinand is buit. Finally,this paper precisely conclude the temperature of the irradiator in exact environment and medium by comparing the graybodies in two above situations. The paper tests the universality and veracity of this thermometry technology and revised method via a series experiments about the same kind radiators in different environment and medium.
|
|
Received: 2015-11-06
Accepted: 2016-04-02
|
|
|
|
Corresponding Authors:
DAI Chang-jian
E-mail: daicj@126.com
|
|
[1] LI Yun-hong, MA Rong, ZHANG Heng, et al(李云红, 马 蓉, 张 恒, 等). Infrared and Laser Engineering(红外与激光工程), 2015, 1: 27.
[2] Lee J, Oh H, Bae C H. Fuel, 2012, 102(7): 264.
[3] Labergue A, Delconte A, Castanet G, et al. Experiments in Fluids, 2012, 52(5): 1121.
[4] Zhang J, Jing W, Roberts W L, et al. Applied Energy, 2013, 107(2): 52.
[5] ZHANG Xiao-long，LIU Ying，ZHANG Ying，et al(张晓龙, 刘 英, 张 盈, 等). Acta Photonica Sinica(光子学报), 2012, 41(2): 173.
[6] Hsu P S, Kulatilaka W D, Gord J R, et al. Raman Spectroscope, 2013, 44: 1330.
[7] Lockett R D, Ball D, Robertson G N. Optics and Lasers in Engineering, 2013, 51(7): 929.
[8] PENG Li-jun(彭利军). Physics Examination and Testing, 2006, 24(5): 46.
[9] SUN Xiao-gang, DAI Jing-min, CONG Da-cheng, et al(孙晓刚，戴景民，丛大成，等). Journal of Infrared and Millimeter Wave(红外与毫米波学报), 1998, 17(3): 221.
[10] Jenkins T P, Hanson R K. Combustion and Flam, 2011, 126(3): 1669.
[11] LI Yao, DAI Chang-jian(李 耀，戴长建). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2016, 36(1)：38.
[12] QIN Yun-shan, LUAN Xi-wu(秦蕴珊, 栾锡武). Progress in Geophysics(地球物理学进展), 2002，17(4): 592.
[13] JIN Feng，ZHOU Yi-hong(金 峰, 周宜红). Engineering Journal of Wuhan University(武汉大学学报·工学版), 2015, 4: 451. |
|
|
|
