AAS Determination of Sb in Pretreated Copper Anode Slime by Alkali Fusion Method
DONG Zai-zheng1, 2, WANG Nan1, LI Xue-jiao3, TONG Xiao-min1, WANG Lin1, YANG Hong-ying3*
1. General Research Academy, Northeastern University, Shenyang 110819, China
2. College of Resources and Civil Engineering, Northeastern University, Shenyang 110819, China
3. School of Metallurgy, Northeastern University, Shenyang 110819, China
Abstract：Copper anode smile is an important by-product of metallurgical industry which contains a variety of precious metals and valuable metals, so that its comprehensive recycling and utilization is increasingly concerned. It is difficult to use conventional method to dissolve the Sb in pretreated residue of copper anode slime (enriched slag). Therefore, it is necessary to develop an accurate and simple method to realize the quantitative analysis of Sb. Here, a comprehensive analysis method was developed for the chemical composition, phase and microstructure of the enriched slag by means of X-ray fluorescence spectroscopy, X-ray diffraction and field emission scanning electron microscopy by using alkali fusion procedure. The analysis results showed that the chemical composition and physical structure of the enriched slag are complex, and its components are chemical stable and intergrowth closely. Sb exists in the form of high state antimony acid salt with a stable structure. The samples were digested by Na2O2 fusion method, and the standard series of synthetic standard samples were synthesized. The content of Sb in the enriched slag by flame AAS was 8.23% with the relative standard deviation of 0.97%, the detection limit of 0.072% and the recoveries of 94.9%～99.2%. Here，the enriched slag can be completely dissolved by this simple method, which does not require the use of special reagents and instruments. Because the synthetic standard sample is similar to the actual sample, the interference of coexisting substances caused by the complicated chemical composition can be eliminated. This method with high sensitivity and good accuracy in comparison experiment, can be used for the quantitative determination of Sb in pretreated copper anode slime.
董再蒸，王 楠，李雪娇，童晓旻，王 琳，杨洪英. 碱熔试样-原子吸收光谱法测定铜阳极泥预处理渣料中的Sb[J]. 光谱学与光谱分析, 2017, 37(12): 3877-3881.
DONG Zai-zheng, WANG Nan, LI Xue-jiao, TONG Xiao-min, WANG Lin, YANG Hong-ying. AAS Determination of Sb in Pretreated Copper Anode Slime by Alkali Fusion Method. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2017, 37(12): 3877-3881.
[1] Gu Z H，Chen J，Fahidy T Z. Hydrometallurgy，1995，37(2): 149.
[2] Wang X W，Chen Q Y，Yin Z L，et al. Hydrometallurgy，2006，(84): 211.
[3] Donmez B，Sevim F，Colak S. Chemical Engineering ＆ Technology，2001，24: 1.
[4] LI Xue-jiao，YANG Hong-ying，TONG Lin-lin，et al(李雪娇，杨洪英，佟琳琳，等). Journal of Northeastern University·Natural Science(东北大学学报·自然科学版)，2014，34(4)：560.
[5] YANG Hong-ying，CHEN Guo-bao，Lü Yang，et al(杨洪英，陈国宝，吕 阳，等). China Nonferrous Metallurgy(中国有色冶金)，2013，42(8)：66.
[6] Bradwell D J, Kim H, Sirk A H C, et al. Journal of the American Chemical Society, 2012, 134(4): 1895.
[7] Abrams R L. Journal of Vinyl Technology, 1981, 3(4): 205.
[8] Jiangsu Hengtong Electric Cable Co. Ltd.(江苏亨通电力电缆有限公司). CN103483708A(中国专利)，2014-01-01.
[9] General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China(国家质检总局). GB/T 15925—2010(中国标准). Beijing: Standards Press of China(北京：中国标准出版社)，2010.
[10] General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China(国家质检总局). GB/T 23607—2009(中国标准). Beijing: Standards Press of China(北京：中国标准出版社)，2009.
[11] Ministry of Industry and Information Technology of the People’s Republic of China(工业和信息化部). YS/T 745.9—2012(中国标准). Beijing: Standards Press of China(北京：中国标准出版社)，2013.
[12] WANG Jing-xia，SU Fang(王静霞，苏 芳). Journal of Jining University(济宁学院学报)，2012，33(6)：16.
