Abstract：The Er3+ and Yb3+ doped Y2O3 Nano powder was prepared by sol-gel method. Based on 2H11/2→4I15/2 and 4S3/2→4I15/2 green conversion luminescence intensity rate of Er3+, the sample surface temperature changes caused by the increase in 980 nm diode laser pump power were studied. The results show that with pump power increasing, the sample surface temperature substantially rises. And the surface temperature reached to 820 K when the pump power was 1 000 mW. The phenomenon plays an important role in the analysis of upconversion process, especially with saturation power. And this feature has a potential application prospect in the biomedicine, soft tissue hole burning as well as the field of temperature sensing materials.
[1] Ye Yanxi, Liu Enzhou, Hu Xiaoyun, et al. Chinese Science Bulletin, 2011, 56(25): 2668. [2] Ji Ruonan, Ye Yanxi, Hu Xiaoyun, et al. Science China, 2012, 55(7): 1152. [3] ZHAO Su-ling, XU Zheng, HOU Yan-bing, et al(赵谡玲, 徐 征, 侯延冰, 等). Journal of The Chinese Rare Earth Society(中国稀土学报), 2002, 20(6): 637. [4] FU Zhen-xing, LIU Bi-rui(伏振兴, 刘碧蕊). Science China Press(科学通报)，2011, 56(18): 1419. [5] Qiao Yanmin, Guo Hai. Science Direct, 2009, 27(3): 406. [6] Xu W ,Li G G, Cao B S, et al. Chin. Phys. B, 2010, 19(12): 127804-1. [7] LI Hui, YANG Kui-sheng, QI Ning, et al(李 慧, 杨魁胜, 祁 宁, 等). Chinese Optics(中国光学), 2011, 4(6): 673. [8] Sunil Kumar Singh, Kaushal Kumar, Rai S B. Sensors and Actuators A: Physical, 2009，149: 16. [9] Wade S A, Collins S F, Baxter G W. Journal of Applied Physics, 2003, 94(8): 4743.
