Abstract:An ICP-AES method for the determination of active components Mo and Bi in catalyst for acrylonitrile production was established and reported in this paper. 0.2 g of the sample was dissolved with 5 mL of aqua regia and 8 mL of HF at 75 ℃ on a water bath and evaporated till dry to expel SiF4. The residue was dissolved and made volume with 3% HCL up to 100 mL. The soution was prepared for Bi determination. Successively diluted with 3% HCL for 10 times the solution was used for Mo determination. Spectral interferences were investigated in detail by means of profiling the analytical lines with wavelength scanning of the blank and coexisting elements in the vicinity of the lines. Three Mo lines, MoⅡ202.030, MoⅡ203.844 and MoⅡ204.598,and two Bi lines, BiⅡ190.241 and BiⅠ223.061 were selected as the analytical lines considered free of spectral interferences. Utilizing multiple lines in a full spectrum for simultaneous determination of one element is of benefit to the improvement of accuracy and precision of the analysis. The method has been successfully used for monitoring the activity of the catalyst in acrylonitrile production.
史慧芳. ICP-AES法测定丙烯腈催化剂中活性组分钼和铋 [J]. 光谱学与光谱分析, 2004, 24(02): 229-232.
SHI Hui-fang. ICP-AES Method for the Determination of Active Components Mo and Bi in Catalyst for Acrylonitrile Production . SPECTROSCOPY AND SPECTRAL ANALYSIS, 2004, 24(02): 229-232.
[1] 邱德仁. 原子光谱分析. 上海:复旦大学出版社, 2001. 196. [2] Boumans P W J M. ICP Emission Spectroscopy, Part 1, Ch 4, Section 4.7.4, New York:John Wiley and Sons, 1987. [3] 陈新坤. 电感耦合等离子体光谱法的原理和应用. 天津:南开大学出版社, 1987. [4] Thompson M, Walsh J N. ICP光谱分析指南. 北京:冶金工业出版社, 1991. 32. [5] Boumans P W J M. Line Coincidence Tables for ICP-AES, 2nd ed. New York:Pergamon, 1984. Chap. 5, 7. [6] Winge R K,Fassel V A,Peteisonand V J et al. ICP-AES:An Atlas of Spectral Information. New York:Elsevier, 1985. [7] Boumans P W J M. Spectrochim Acta, 1988,43B:69.