基于ReliefF特征权重融合的激光冲击强化保护层烧损实时检测

doi:10.3964/j.issn.1000-0593(2023)08-2437-09

Abstract
References
Related Citation (15)

Download: PDF (17362 KB)
Export: BibTeX | EndNote (RIS)

Abstract As a new laser surface treatment technology, laser shock peening (LSP) has been applied to strengthen and prolong the life of critical components such as the aero-engine and gearbox. Ensuring the consistency and stability of LSP processing quality is of great significance to the long service life of the aviation mentioned above equipment. However, the protective coating is easily ablated and damaged in the high-energy transient LSP process, limiting the industrial application of LSP significantly. Therefore, this paper proposed a real-time detection method for protective coating damage of LSP based on ReliefF feature weight fusion by analyzing laser-induced plasma spectrum signal. The 7075 aluminum alloy with a thickness of 4 mm was used as an LSP target, and the black tape was used as the protective coating. Firstly, the Ocean Optics-HR4000 spectrometer with a wide wavelength range and Princeton SP2750 spectrometer with a high resolution was used to synchronously collect the plasma spectra produced in the LSP transient process.Secondly, according to the spectral signals with a high resolution collected by the Princeton SP2750 spectrometer,the peak intensities and Stark-FWHMs of Al Ⅰ spectra at 394.40 and 396.15 nm and that of Fe Ⅰ spectra at 393.36 and 396.80 nm were extracted, then, combined with the feature importance obtained by the ReliefF algorithm to screen out two Al Ⅰ spectra that were more sensitive to the damage states of the protective coating, andqualitatively analyzedthe sensitivity and the law of transient variation for intensity and Stark-FWHM of Al Ⅰ spectra to the damage states of the protective coating. Furthermore, a feature named intensity-FWHM (I-FWHM) fusing the information of multiple spectral emission lines was constructed using the ReliefF algorithm, and then, the ability of each feature to distinguish the three kinds of damage states was quantitatively evaluated based on the distance between classes. Finally, combined with the threshold segmentation method, real-time detection of LSP protection layer damage was realized. The experimental results show that the intensity is very poor in distinguishing between normal state and slight damage but very strong in distinguishing between slight damage and complete damage. The Stark-FWHM is far better than intensity in distinguishing between the normal state and slight damage, but the abilityis relatively weak in distinguishing between slight and complete damage. The I-FWHM combines the advantages of the above single feature and can better distinguish the three types of damage states simultaneously. Therefore, I-FWHM has stronger anti-interference ability and higher robustness for the real-time detection of protective coating damage state in the LSP process.

Key words：Laser shock peening(LSP); Aluminium alloy; Plasma emission spectroscopy; ReliefF feature fusion; Real-time detection

Received: 2021-07-09 Accepted: 2022-07-22

ZTFLH:

O657.3

Cite this article:

ZHANG Zhi-fen,LIU Zi-min,QIN Rui, et al. Real-Time Detection of Protective Coating Damage During Laser Shock Peening Based on ReliefF Feature Weight Fusion[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(08): 2437-2445.

URL:

https://www.gpxygpfx.com/EN/10.3964/j.issn.1000-0593(2023)08-2437-09 OR https://www.gpxygpfx.com/EN/Y2023/V43/I08/2437

[1] QIAO Hong-chao，HU Xian-liang，ZHAO Ji-bin，et al（乔红超，胡宪亮，赵吉宾，等）. Surface Technology (表面技术)，2019，48(12)：1.
[2] Zhang Y，Zhang T L，Li H，et al . Spectrochim Acta B: Atomic Spectroscopy，2021，181：106218.
[3] Wu P P，Benicewicz P K，Azer M N. System and Method for Monitoring Laser Shock Processing, U. S. Patent, 7273998, 2007.
[4] YANG Wen-bin，ZHOU Jiang-ning，LI Bin-cheng，et al（杨文斌, 周江宁, 李斌成，等）. Acta Physica Sinica（物理学报），2017，66(9)：095201.
[5] LI Zhi-yong(李志勇). Theory of Welding Plasma Radiation Spectrum and Its Industrial App-Lication(焊接等离子体辐射光谱理论及其工业应用基础). Beijing: Peking University Press(北京：北京大学出版社)，2013.
[6] XING Li-cheng，ZHANG Xiao-dong，LIU Biao，et al（邢立成，张晓冬，刘彪，等）. Spectroscopy and Spectral Analysis（光谱学与光谱分析），2018，38(3)：890.
[7] YANG Zhao-qiang，SHAO Dang-guo，YANG Zhi-hao，et al（杨朝强, 邵党国, 杨志豪，等）. Journal of Chinese Computer Systems（小型微型计算机系统），2020，41(7)：1421.
[8] XUE Hong-tao，ZHOU Yu，WANG Man，et al（薛红涛, 周宇, 王满，等）. Journal of Jiangsu University（Natural Science Edition）[江苏大学学报（自然科学版）]，2019，40(5)：579.
[9] HU Yi，WEI Wen-fu，LEI Dong，et al（胡怡, 魏文赋, 雷栋，等）. Transactions of China Electrotechnical Society（电工技术学报），2016，31(24)：62.
[10] ZHANG Xiao-nei，ZHAI Wen-peng，HOU Hui-rang，et al（张小内, 翟文鹏, 侯惠让，等）. Journal of Electronics & Information Technology（电子与信息学报），2021，43(7)：2032.
[11] DING Si-fan，WANG Feng，WEI Wei（丁思凡, 王锋, 魏巍）. Computer Science（计算机科学），2021，48(4)：91.
[12] YAO Hong-bing，MENG Chun-mei，ZHANG Yong-kang，et al(姚红兵，孟春梅，张永康，等). High Power Laser and Particle Beams（强激光与粒子束），2011，23(8)：2111.