|
|
|
|
|
|
| Scientific Analysis of Ornaments Unearthed From M2 of Sailaqinbopu
Locus, Qulong Site, Tibet |
| LÜ Xin-yan1, 2, LIU Yan1, 2, YANG Fu-wei1, 2*, YU Chun1, 2*, XI Lin3, Shange Wangdwei4, ZHANG Kun1, 2, XIAN Yi-heng1, 2 |
1. Department of Preservation Technology for Cultural Heritage, Northwest University, Xi’an 710127, China
2. Key Laboratory of Cultural Heritage Research and Conservation, Northwest University, Xi’an 710127, China
3. Shaanxi Provincial Institute of Archaeology, Xi’an 710043, China
4. Tibet’s Institute of Cultural Relic Preservation, Lhasa 850030, China
|
|
|
|
|
Abstract The Qulong Site, located in Ngari Prefecture of Tibet Autonomous Region, is a relic of human activities with a long duration and rich types of remains. The ornaments studied in this paper were excavated from tomb No.2(M2) of Sailaqinbopu Locus, the Qulong Site, dating back to about 2700~2400 years ago. Due to the processing and grinding during production and the weathering and erosion suffered by long-term underground burial, it is impossible to judge the raw materials of the eight ornaments only from their appearance. Therefore, ultra-depth of field microscopic analysis, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction experimental analysis (XRD), thermal analysis (TGA-DSC), X-ray fluorescence spectrometry (XRF), Scanning electron microscopy (SEM) and porous material density, porosity, water absorption test were used not only to determine the chemical composition and raw material source of ornaments, but also to scientifically and comprehensively analyze its microscopic morphology, shape and structure characteristics and preservation condition. The results show that the raw materials of eight ornaments come from the pearl layer of different freshwater shellfish shells, and the main components are aragonite calcium carbonate, with a small amount of organic matter and trace elements such as Fe, Ba, Cr, Cu; there are grinding marks on the surface of the ornaments, and the drilling method is drilling from both sides, and holes of thicker ornaments are drilled with a bit; the overall weathering is serious, luster is no longer and all have a certain degree of crisp powder, porosity and water absorption rate of the open holes are higher than the modern shell, and the main reason for these diseases is the loose and disorderly shell pearl layer aragonite plates caused by loss of organic matter. On the one hand, the above research conclusions provide important information on the material selection, shape and production technology of ornaments in the Xiangxiong period in western Tibet, and reflect the situation and aesthetic connotation of shellfish use in society at that time. On the other hand, they also provide valuable reference materials for the subsequent protection and restoration of such unearthed cultural relics.
|
|
Received: 2022-02-17
Accepted: 2022-06-01
|
|
|
|
Corresponding Authors:
YANG Fu-wei, YU Chun
E-mail: yangfuwei@nwu.edu.cn；9768612@qq.com
|
|
[1] XI Lin, ZHANG Jian-lin, Shange Wangdwei, et al（席 琳，张建林，夏格旺堆，等）. Archaeology and Cultural Relics（考古与文物）, 2019, 236(6): 51.
[2] ZHANG Yun（张 云）. China Tibetology（中国藏学）, 2016，(123): 5.
[3] PENG Wen-shi, LIU Gao-kui（彭文世，刘高魁）. Acta Mineralogica Sinica（矿物学报）, 1983，(3): 169.
[4] ZHANG Gang-sheng, LI Hao-xuan（张刚生，李浩璇）. Journal of Mineralogy and Petrology（矿物岩石）, 2006，(1): 1.
[5] ZHANG Gang-sheng, DING Shi-lei, JIA Tai-xuan, et al（张刚生，丁世磊，贾太轩，等）. Journal of Gems & Gemmology（宝石和宝石学杂志）, 2005，(3): 7.
[6] ZHOU Pei-ling（周佩玲）. Journal of Guilin University of Technology（桂林工学院学报）, 1998，(1): 47.
[7] YANG Jin-sen（杨金森）. The Chinese Journal for the History of Science and Technology（中国科技史料）, 1981，(3): 87.
[8] ZHANG Gang-sheng, XIE Xian-de（张刚生，谢先德）. Journal of Inorganic Materials（无机材料学报）, 2000，(4): 765.
[9] XIE Xian-de, ZHANG Gang-sheng（谢先德，张刚生）. Acta Mineralogica Sinica（矿物学报）, 2001，(3): 299.
[10] Gutmannsbauer W, Hänni H A. Journal of Gemmology, 1994, 24(4): 241.
[11] YANG Hua, LIU Qiong（杨 华，刘 琼）. Acta Petrologica et Mineralogica（岩石矿物学杂志）, 2021, 40(1): 142.
[12] Wang X, Ye Y, Wu X, et al. Physics and Chemistry of Minerals, 2019, 46(1): 51.
[13] Lucas A, Mouallem-Bahout M, Carel C, et al. Journal of Solid State Chemistry, 1999, 146(1): 73.
[14] Ren F, Wan X, Ma Z, et al. Materials Chemistry and Physics, 2009, 114(1): 367.
[15] Zhang G, Guo Y, Ao J, et al. Materials Science and Engineering: C, 2013, 33(4): 2046.
[16] LI Li-ping（李立平）. Earth Science（地球科学）, 2009, 34(5): 752.
[17] WANG Cun, HE Ji-bin, XIE Ting-shu, et al（王 存，何吉彬，谢廷枢，等）. Acta Mineralogica Sinica（矿物学报）, 2012, 32(2): 310.
[18] SUN Jia-mei, MAO Zhen-wei（孙家美，毛振伟）. Journal of Guangdong Ocean University（广东海洋大学学报）, 1991，(2): 25.
[19] ZHANG Gang-sheng, XIE Xian-de（张刚生，谢先德）. Journal of Mineralogy and Petrology（矿物岩石）, 2000，(1): 11.
[20] Addadi L, Joester D, Nudelman F, et al. Chemistry—A European Journal, 2006, 12(4): 980.
[21] WAN Xin-di, REN Feng-zhang, LIU Ping, et al（万欣娣，任凤章，刘 平，等）. Materials Reports（材料导报）, 2006，(10): 21.
[22] LI Qian, ZHANG En, TU Xiao-qiong（李 倩，张 恩，涂晓琼）. Acta Mineralogica Sinica（矿物学报）, 2016, 36(2): 225.
[23] ZHU Qi-hui, ZHANG Rui, JI Peng, et al（竺奇慧，张 瑞，纪 鹏，等）. Oceanologia Et Limnologia Sinica（海洋与湖沼）, 2014, 45(6): 1264.
[24] Halloran B A, Donachy J E. Comparative Biochemistry and Physiology Part B: Biochemistry and Molecular Biology, 1995, 111(2): 221.
[25] Marxen J C, Becker W. Comparative Biochemistry and Physiology Part B: Biochemistry and Molecular Biology, 1997, 118(1): 23.
[26] OUYANG Shan, QI Tao, XIAO Jin-zhi, et al（欧阳珊，祁 涛，肖晋志，等）. Journal of Nanchang University(Engineering ＆ Technology Edition)[南昌大学学报（工科版）], 2011, 33(1): 1.
|
|
|
|
