|
|
|
|
|
|
The Mechanism of Hydrocarbon Flame Soot Formation in Spectral
Diagnosis: A Review |
WU Run-min1, XIE Fei1, SONG Xu-dong1*, BAI Yong-hui1, WANG Jiao-fei1, SU Wei-guang1, YU Guang-suo1, 2 |
1. State Key Laboratory of High-Efficiency Utilization of Coal and Green Chemical Engineering, School of Chemistry and Chemical Engineering, Ningxia University, Yinchuan 750021, China
2. Institute of Clean Coal Technology, East China University of Science and Technology, Shanghai 200237, China
|
|
|
Abstract As the main by-product of incomplete combustion of hydrocarbon fuel, soot not only has a detrimental effect on the combustion equipment but also harms air quality and human health. The formation of soot is a complex physical and chemical process. It is necessary to decrease the striking differences between the physical evolution and the chemical process of soot generation and combustion. In the past few decades, some scholars have investigated the mechanism of soot generation by spectral diagnostic technology and have had the understanding of soot formation in different generation stages to some extent. By using spectral diagnosis technology, the process of soot generation in the combustion system could be researched more comprehensively, and the molecular composition, fine structure, concentration distribution and other characteristics of soot could also be determined. More importantly, the process could be explained from the changes of soot structure and blackbody radiation intensity in detail. The aim of this study, on the one hand, is to illustrate the research process and developing trend of hydrocarbon flame soot by using spectral diagnosis technology. On the other hand, it is to discuss the problems like the accuracy of the radiation intensity generated during the process of soot generation in flames containing background radiation by the diagnostic tools, LIBS, LII and LIF included. Additionally, the formation mechanism of hydrocarbon flame soot (from precursor generation and growth to particle generation and aggregation, and finally, particle oxidation) is introduced in detail. Meanwhile, it summarized the application of spectral diagnostic methods to detect the properties of soot and the research status of spectral diagnostic techniques on the characterization of soot during combustion, including the volume fraction, reaction temperature and structure characterization of soot based on image processing, and the influence of polycyclic aromatic hydrocarbons, reaction atmosphere and temperature on the formation of soot particles was explored as well. Finally, the future application of spectral diagnostic methods in soot is forecasted. Spectroscopy diagnosis will present a more detailed and accurate study of the chemical reaction mechanism of soot formation in the future. The impact of uneven soot on flame images needs to be reduced, and the development trend of optimizing spectral diagnostic measurement methods to collect and monitor the concentration of multiple gas components in flame simultaneously and the generated soot in real-time. The analysis of spectral diagnostic and image analysis in homogeneous combustion flame soot will provide directions and have crucial scientific significance for promoting clean combustion and heterogeneous flow research.
|
Received: 2021-07-08
Accepted: 2021-11-27
|
|
Corresponding Authors:
SONG Xu-dong
E-mail: xdsong@nxu.edu.cn
|
|
[1] Jain A, Wang Y, Kulatilaka W D. Proceedings of the Combustion Institute, 2019, 37(2): 1289.
[2] De Falco G, Picca F, Commodo M, et al. Fuel, 2020, 259: 116244.
[3] Hua Y, Qiu L, Liu F, et al. Fuel, 2020, 268: 117398.
[4] Dobbins R A. Aerosol Science and Technology, 2007, 41: 485.
[5] Miller J A, Melius C F. Combustion and Flame, 1992, 91(1): 21.
[6] Kang Y, Sun Y, Lu X, et al. Energy, 2018, 150: 709.
[7] Thomson K, Gulder O, Weckman E, et. al. Combustion and Flame, 2005, 140(3): 222.
[8] ZHANG Lang, TAN Jian-guo, LIU Yao(张 浪,谭建国,刘 瑶). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2020, 40(6): 1703.
[9] Liang S, Li Z, Gao J, et al. Combustion and Flame, 2019, 206: 363.
[10] Mei J, You X, Law C K. Combustion and Flame, 2020, 215: 28.
[11] Mannazhi M, Török S, Gao J, et al. Proceedings of the Combustion Institute, 2021, 38(1): 1217.
[12] LAN Yun-jiao, LU Yuan, GUO Fei, et al(兰云蛟, 卢 渊,郭 飞,等). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2020, 40(6): 1947.
[13] Iwata K, Koide H, Imamura O, et al. Energy, 2019, 188: 115959.
[14] Bartos D, Dunn M, Sirignano M, et al. Proceedings of the Combustion Institute, 2017, 36(2): 1869.
[15] Liu P, Zhang Y R, Wang L J, et al. Energy & Fuels, 2018, 32(6): 7112.
[16] Cruz J J, Figueira Da Silva L F, Escudero F, et al. Combustion Science and Technology, 2020, 194(8): 1643.
[17] WANG Meng, ZHANG Yan-feng, CHEN Jun, et al(王 孟, 张焰峰, 陈 军, 等). Chinese Journal of Lasers(中国激光), 2019, 46(3): 168.
[18] Joo H I, Gülder Ö L. Combustion and Flame, 2010, 157(6): 1194.
[19] Flower W L. Combustion and Flame, 1989, 77(3-4): 279.
[20] Xu L, Yan F, Wang Y, et al. Combustion and Flame, 2020, 213: 14.
[21] Qiu L, Zheng Y, Hua Y, et al. Combustion Science and Technology, 2019, 193(4): 626.
[22] Chu C, Thomson M J. Combustion and Flame, 2020, 215: 169.
[23] Apicella B, Tregrossi A, Ciajolo A, et al. Combustion Science and Technology, 2019, 191(9): 1558.
[24] Verma P, Jafari M, Rahman S M A, et al. Fuel, 2020, 259: 116167.
[25] WANG Zi-ye, LIU Ye, LÜ Gang, et al(王子晔, 刘 野, 吕 刚,等). Journal of Combustion Science and Technology(燃烧科学与技术), 2020, 26(3): 280.
[26] Han W, Ya Y, Chu H, et al. Journal of the Energy Institute, 2020, 93(1): 224.
[27] LIU Chun-peng,GAO Zhan,ZHU Lei, et al(刘春鹏,高 展,朱 磊,等). Internal Combustion Engingand Powerplant(内燃机与动力装置), 2018, 35(2): 8.
[28] Dreyer J A H, Poli M, Eaves N A, et al. Combustion and Flame, 2019, 209: 256.
[29] Lee C C, Tran M, Scribano G, et al. Energy & Fuels, 2019, 33(12): 12839.
|
[1] |
FENG Ying-chao1, HUANG Yi-ming2*, LIU Jin-ping1, JIA Chen-peng2, CHEN Peng1, WU Shao-jie2*, REN Xu-kai3, YU Huan-wei3. On-Line Monitoring of Laser Wire Filling Welding Process Based on Emission Spectrum[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(06): 1927-1935. |
[2] |
LI Yi-chao1, 2, FU Jia1*, LÜ Bo1*, HUANG Yao1, QIAN Jin-ping1, LU Zheng-ping1, FU Sheng-yu1, LI Jian-kang1, WEI Yong-qing3, LIU Dong-mei4, XIAO Bing-jia1. A Photoelastic Modulator Based MSE Spectroscopic Diagnostic on EAST[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(01): 111-115. |
[3] |
HUANG Shi-cheng1, HUANG Yi-ming1, 2*, YANG Li-jun1*, YUAN Jiong1, LIN Zhi-xiong1, ZHAO Xiao-yan1. Analysis of Inverted Y-Shaped Arc Photoelectricity Characteristic of
Flux-Cored Wire Pulsed TIG Additive Manufacturing[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2022, 42(08): 2579-2586. |
[4] |
YANG Jin-chuan1, 2, AN Jing-long1, 2, LI Cong3, ZHU Wen-chao3*, HUANG Bang-dou4*, ZHANG Cheng4, 5, SHAO Tao4, 5. Study on Detecting Method of Toxic Agent Containing Phosphorus
(Simulation Agent) by Optical Emission Spectroscopy of
Atmospheric Pressure Low-Temperature Plasma[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2022, 42(06): 1728-1734. |
[5] |
ZHU Yu-han, GU Ming-yan*, ZHU Ben-cheng, WU Jia-jia, LIN Yu-yu. Study on the Soot Order Degree and Functional Groups of Doping CH4 Into C2H4/H2 Diffusion Flame With Raman and FTIR[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2021, 41(12): 3722-3726. |
[6] |
ZHAO Xiao-yan1, YANG Li-jun2*, HUANG Yi-ming1,2*, HUANG Shi-cheng1, LI Wang1. Study on Arc Characteristic of Flux-Cored Wire Pulse TIG Arc Additive Manufacturing[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2021, 41(08): 2397-2403. |
[7] |
LI Zhi-gang, XU Xiang, LI Yang, HUANG Wei. Study on Plasma Temperature and Electron Density During Arc Initiation by Underwater Wet Welding[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2020, 40(11): 3404-3408. |
[8] |
ZHOU Ying1, BAI Yong-hui1, SONG Xu-dong1*, YAO Min3, WANG Jiao-fei1, SU Wei-guang1, YU Guang-suo1,2*. Application of Chemiluminescence in Spectral Diagnosis: A Review[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2020, 40(11): 3358-3364. |
[9] |
SONG Peng1, 3, ZHANG Wei2, CHEN Lei2*, WANG Xiao-fang1, LONG Wu-qiang1. Experimental Study on Ionization Characteristics of Dielectric Barrier Discharge with Different Electrode Structures[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2019, 39(02): 410-414. |
[10] |
CAI Hong-hua, NIE Wan-sheng*, SU Ling-yu, SHI Tian-yi. Study on the Infrared Radiation Characteristics of the GOX/KERO Engine Plume[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2018, 38(09): 2735-2740. |
[11] |
LIU Ying1, YANG Li-jun1,2*, HE Tian-xi1, ZHAI Yong-lei1, LIU Tong1. The Spectral Analysis of TIG Welding Filled with Flux-Cored Wire[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2017, 37(07): 2171-2176. |
[12] |
LI Xin-hui1, ZHANG Xiu-ying1*, MA Yuan-dan2, JIN Jia-xin1*, CHENG Min1, 3, ZHANG Xiao-min1, JIANG Hong1, 2. The Hyperspectral Diagnosis Model for Acid Stress of Cinnamomum camphora[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2017, 37(06): 1872-1878. |
[13] |
XIAN Lei-yong1, LI You-liang1, HE Jiu-ning1, ZHANG Chang-hua1*, LI Ping1, LI Xiang-yuan2 . Measurement of Soot Yield from the Pyrolysis of Toluene at High Temperatures by Laser Extinction Method[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2016, 36(11): 3481-3484. |
[14] |
ZHANG Hua1, WU Jian-jun1*, HE Zhen1, LI Shi-liang2, ZHANG Yu1. Study on Plasma Characteristics in a Pulsed Plasma Thruster by Optical Emission Spectroscopy[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2016, 36(06): 1867-1871. |
[15] |
DU Xiao1, YANG Li-jun1, 2*, LIU Tong1, JIAO Jiao1, WANG Hui-chao1 . The Spectral Analysis of Laser-Induced Plasma in Laser Welding with Various Protecting Conditions[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2016, 36(01): 15-19. |
|
|
|
|