|
|
|
|
|
|
Reflection Polarization Spectral Characteristics of High Performance Coating Material La2Zr2O7 |
SHI Dong-dong, CAO Zhao-bin, HUAN Yan-hua, GONG Yan-chun, WU Wen-yuan, YANG Jun* |
Department of General Education, Army Engineering University of PLA, Nanjing 211101, China
|
|
|
Abstract Rare earth zirconate (RE2Zr2O7, RE is rare earth element) materials have the advantages of low thermal conductivity, stable high-temperature phase structure, corrosion resistance and relatively low price, etc. In recent years, it has been widely and deeply applied in the fields of the thermal barrier coating, environmental barrier coating and nuclear protective coating and has attracted extensive attention.However, the current research on these coating materials is mainly focused on thermal, mechanical and electrical properties, while the optical properties, especially the polarization characteristics of reflected light, are rarely reported. Therefore, taking La2Zr2O7 as the representative, the optical polarization characteristics of rare earth zirconate were systematically studied, especially the corresponding relationship between material surface properties and optical polarization characteristics was analyzed. In the experiment, the powder and density bulk of La2Zr2O7 were synthesized by the solid-state reaction method. The microstructure was analyzed and characterized by X-ray diffraction (XRD), Raman spectroscopy and scanning electron microscope (SEM). The results show that the prepared La2Zr2O7 is a cubic pyrochlore phase structure.In the analysis of optical properties, natural light and linearly polarized light were used as detection light sources, respectively, and the polarization characteristics of reflected light are studied under different detection angles.It is shown that, for the natural light incidents, the degree of linear polarization (DOLP) of both bulk and powder La2Zr2O7 materials is significantly dependent on the incident light wavelength. With the increase of wavelength, the DOLP increases first and then decreases. It is worth noting that the DOLP decreases rapidly and approaches zero in the infrared band, indicating that the material shows good polarization stealth characteristics in the infrared band. It is also found that the DOLP of dense bulk has amaximum value at ~720 and ~773 nm while natural light is incident, and the peak wavelength is not sensitive to the detection angle. Powder materials also have two peaks near ~714 and ~774 nm. Under the incidence of linearly polarized light, for the large angle detection angle, DOLP of bulk has two peaks at ~720 and ~763 nm respectively. Different from the incidence of natural light, two peak values are equal under the same detection angle. Two peaks near ~720 and ~755 nm respectively appear for powder materials, and the peak intensity decreases, indicating that the roughness of the coating material has a definite influence on the polarization characteristics of the reflected light.Further research shows that the wavelength corresponding to the two peaks does not become dependent on the detection angle. The results of this study provide theoretical and experimental support for the development, application and design of polarization spectroscopy of rare-earth zirconate coating materials.
|
Received: 2021-08-11
Accepted: 2022-02-15
|
|
Corresponding Authors:
YANG Jun
E-mail: yangjun13@tsinghua.org.cn
|
|
[1] Yang M, Xu W B, Li J W, et al. Optik, 2019,(182):766.
[2] Hou W Z, Li Z Q, Wang J, et al. Journal of Geophysical Research: Atmospheres, 2018,(123):2215.
[3] Bitterling M, Bern G, Wilson H R, et al. Solar Energy, 2020,(209):653.
[4] Zhou J, He H, Chen Z, et al. J. Biomed. Opt., 2018,(23):1.
[5] Al Graiti S A, Maywar D N. Opt. Express, 2019, (27): 38404.
[6] Zhang Y, Shi Z G, Wen Q T. Journal of Electronic Imaging, 2017,(26): 033004.
[7] Wang Y H, Zhuang M A, Liu L, et al. Journal of Advanced Ceramics, 2021, 10(6): 1389.
[8] Yang J, Wan C, Zhao M, et al. Journal of the European Ceramic Society, 2016,(36):3809.
[9] Guo L, Li B W, Cheng Y X, et al. Journal of Advanced Ceramics, 2022, (11): 454.
[10] Xiang H, Xing Y, Dai F Z, et al. Journal of Advanced Ceramics, 2021,(10):385.
[11] Higgins A B, Wiersema K, Covino S, et al. Monthly Notices of the Royal Astronomical Society, 2019,(482):5023.
[12] Liu S Y, Lin Y, Yan L, et al. Remote Sensing, 2020,(12):3891.
[13] Tyo J S, Goldstein D L, Chenault D B, et al. Applied Optics, 2006,(45):5453.
[14] Xu J, Qian W X, Chen Q. Optik, 2018, (158): 341.
[15] Cheng Y, Wang Y, Niu Y, et al. Opt Express, 2020,(28):6350.
|
[1] |
XU Lu1, CHEN Yi-yun1, 2, 3*, HONG Yong-sheng1, WEI Yu1, GUO Long4, Marc Linderman5. Estimation of Soil Organic Carbon Content by Imaging Spectroscopy With Soil Roughness[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2022, 42(09): 2788-2794. |
[2] |
YU Yang1, ZHANG Zhao-hui1, 2*, ZHAO Xiao-yan1, ZHANG Tian-yao1. Study on Extraction Method of Terahertz Spectral Parameters of Rough Surface Samples[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2022, 42(02): 386-391. |
[3] |
SUO Yu-ting1,2, LUO Hua-ping1,2*, LIU Jin-xiu1,2, LI Wei1,2, CHEN Chong3, XU Jia-yi1,2, WANG Chang-xu1,2. A Comparative Study on Roujean and Ross Li Models of Winter Jujube in South Xinjiang Under Different Outdoor Light[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2021, 41(06): 1737-1744. |
[4] |
SUO Yu-ting1,2, LUO Hua-ping1,2*, LI Wei1,2,WANG Chang-xu1,2, XU Jia-yi1,2. Study on the Adaptability of Polarization Parameter Model of Winter Jujube in South Xinjiang to Outdoor Light Conditions[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2021, 41(01): 223-228. |
[5] |
XU Ji-kun1, LI Tian-zi1, 2*, REN Yu-juan1. Experimental Study on the Effect of Roughness on the Inversion of SiO2 Content in Iron Ore by the Thermal Infrared Spectrum[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2020, 40(07): 2153-2158. |
[6] |
CHEN Ping1, WANG Xi-lin1, HONG Xiao2, WANG Han3, ZHAO Chen-long1, JIA Zhi-dong1, ZOU Lin2, LI Yan-min4, FAN Jian-hua4. Influence of Sample Surface Roughness on Signal of Laser-Induced Breakdown Spectroscopy[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2019, 39(06): 1929-1934. |
[7] |
ZHAO Shou-jiang1, YANG Bin1, JIAO Jian-nan2, YANG Peng1, WU Tai-xia3*, WANG Xue-qi1, YAN Lei1*. Using a Polarization Method to Reduce the Vegetation Inversion Error Caused by Strong or Weak Reflection Intensity[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2018, 38(10): 3315-3320. |
[8] |
LI Tian-zi2, 3,LIU Shan-jun1, 2*. A Study on the Effects of Roughness on Thermal Infrared Spectral Unmixing of Rock[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2017, 37(10): 3051-3057. |
[9] |
LIU Xiao-zhen1, ZHANG Cheng1, CHEN Jie2, SHEN Qin-wei1, GUO Ling-ling1, XIE Guang1 . Preparation of La2Zr2O7 Powder with Combustion Method and Its Spectral Properties [J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2016, 36(12): 4063-4066. |
[10] |
SUN Yao, WANG Hong . Analysis of Glass Surface Modification with Ion Beam Based on Ellipsometry[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2016, 36(10): 3388-3393. |
[11] |
LING Jin-jiang, LI Gang, ZHANG Ren-bin, TANG Qian, YE Qiu . Modeling and Simulation of Spectral Polarimetric BRDF [J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2016, 36(01): 42-46. |
[12] |
DING Liang-liang, HONG Rui-jin*, TAO Chun-xian, ZHANG Da-wei . Study of Surface Enhanced Raman Spectroscopy on Copper Films Modified by Ion Beam[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2015, 35(11): 3082-3086. |
[13] |
Lü Yun-feng, ZHAO Yun-sheng . Study of Retrieving the Sandy Surface Roughness Land Based on the Bidirectional Reflectance Model[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2015, 35(11): 3123-3128. |
[14] |
YANG Zhong, LIU Ya-na*, Lü Bin, ZHANG Mao-mao . Rapid Prediction of Surface Roughness of Natural Polymer Material by Visible/Near Infrared Spectroscopy as a Non-Contact Measurement Method[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2013, 33(03): 682-685. |
[15] |
XIANG Yun1,2,YAN Lei1*,ZHAO Yun-sheng3,GOU Zhi-yang1,CHEN Wei1. Influence of Surface Roughness on Degree of Polarization of Biotite Plagioclase Gneiss Varying with Viewing Angle[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2011, 31(12): 3423-3428. |
|
|
|
|