加入收藏  设为首页
 
Home | 中文  
   Home   |   About Journal   |   Editorial Board   |   Instruction   |   Rewarded   |   Indexed-in   |   Impect Factor   |   Subscriptions   |   Contacts Us
SPECTROSCOPY AND SPECTRAL ANALYSIS  2020, Vol. 40 Issue (10): 3077-3080    DOI: 10.3964/j.issn.1000-0593(2020)10-3077-04
|
Preparation and Performance of Red Phosphor ScVO4∶Eu3+ for White LEDs
LI Zhao, WANG Yong-feng, CAO Jing, WU Kun-yao, WANG Ya-nan
School of Materials Engineering,Xi’an Aeronautical University, Xi’an 710077, China
Download: PDF (2541 KB)  
Export: BibTeX | EndNote (RIS)      
Abstract  ScVO4∶Eu3+ red phosphor was prepared using-high temperature solid-state method. The phase, morphology and luminescence properties of the samples were characterized by X-ray powder diffraction (XRD), scanning electron microscope (SEM) and photoluminescence spectrum (PL). The results showed that: the synthesized ScVO4∶Eu3+ red phosphor was a tetragonal system with near-spherical surface. In the excitation spectrum, the excitation peaks at 382 nm, 395 and 466 nm were attributed to 7F05L7, 7F05L6 and 7F05D2 transitions, respectively. In the emission spectrum, the emission peaks at 598, 622 and 710 nm correspond to 5D07F1, 5D07F2 and 5D07F4 transitions of Eu3+. When Eu3+ has a doping ratio of 7% and is calcined at 1 200 ℃ for 3 h, ScVO4∶Eu3+ red phosphor has a CIE color coordinate of (0.671 6, 0.327 3) and fluorescence lifetime of 0.521 ms, which is a kind of high-efficiency red phosphor expected to be used in white LED.
Key words:White LEDs; ScVO4∶Eu3+; Phosphor; Optical performance
Received: 2019-10-26     Accepted: 2020-02-21    
ZTFLH:  TB333  
Cite this article:   
URL:  
https://www.gpxygpfx.com/EN/10.3964/j.issn.1000-0593(2020)10-3077-04     OR      https://www.gpxygpfx.com/EN/Y2020/V40/I10/3077