1. School of Information Science and Engineering, The Key Laboratory for Special Fiber and Fiber Sensor of Hebei Province, Yanshan University, Qinhuangdao 066004, China
2. Productivity Promotion Center of Hebei Province, Shijiazhuang 050021, China
Abstract：In this paper, the standard zinc coloring reagent and zinc color reaction result in water-insoluble flocculent complex. In addition, the absorbance was measured by spectrophotometer, the characteristic spectrum and the absorbance were studied, and the mathematical model was established between the concentration and the absorbance of characteristic wavelength. In this paper, color reagent mainly makes complexing reaction with zinc, copper, cadmium, nickel ion, so this study mainly explores the absorbance of four kinds of ions, such as high concentration and low concentration. Finally, through capturing the relationship between the concentration of zinc ions and the absorbance of the zinc ion, and getting the relationship between the concentration of zinc ions and the absorbance of the zinc ion as well as the absorbance of the four kinds of ions with four wavelengths, the relationship between the absorbance and the total absorbance of the zinc ion is given. During the experiment, the color reaction can meet the requirements of spectrophotometry, which is mainly because of the nature of the reagent, while the color reaction conditions are also essential. In the color reaction process, it is mainly zinc ions and zinc coloring agent complexation react to form complex ions, and flocculent complex. The ion is generally stable, but there is also ionization balance in the aqueous solution, that is when the color conditions change, the formation of complex ions may also occur in the decomposition of complex ions, thus affecting the degree of complex reaction . Color conditions include the amount of reagent, PH value, reaction temperature, color time, the salinity of the solution and turbidity. In conclusion, this paper focuses on the salinity of the solution to be measured on the measurement of zinc ion concentration, and gives the influence rule and calibration model through experiments.
[1] MAO Tian-yu, DAI Ming-xin, PENG Shi-tao, et al(毛天宇, 戴明新, 彭士涛，等). Journal of Tianjin University(天津大学学报), 2009, 42(9): 817.
[2] Kong Qiong-yu, XIA Chang-bin(孔琼宇，夏畅斌). Metallurgical Analysis(冶金分析)，2012，32(12)：57.
[3] Tagle M V, Pozebon D, Garcia R H, et al. Spectroscopy Letters, 2011，44(2): 138.
[4] FAN Qing-jie, DU Guo-rong, TU Jia-run, et al(范清杰，杜国荣，涂家润，等). Journal of Tianjin University(天津大学学报)，2013，46(2)：145.
[5] WANG Zeng-huan, WANG Xu-nuo(王增焕，王许诺). Metallurgical Analysis(冶金分析)，2014，32(2)：44.
[6] SU Qing-mei, QIN Wei(苏庆梅，秦 伟). Marine Sciences(海洋科学)，2009，33(6)：105.
[7] BI Wei-hong, LI Jian-guo, WU Guo-qing, et al(毕卫红，李建国，吴国庆，等). Spectroscopy and Spectral Analysis(光谱学与光谱分析)，2014，34(3)：1.
[8] XUE Yun-wei(薛云伟). Industrial & Science Tribune(产业与科技论坛)，2013，12(13)：106.
[9] YU Teng-fei, ZHANG Yan-jun, BI Wei-hong, et al(于腾飞, 张燕君, 毕卫红, 等). Opto-Electronic Engineering(光电工程), 2015, 42(4): 88.
