Abstract:High density polyethylene (HDPE) was widely used as rotational packaging case in the material reserve field. The chemical changes of HDPE, exposed to particular climatic conditions of tropic marine atmosphere for one year-long in Wanning Hainan, were elucidated by the attenuated total reflection infrared spectroscopy (ATR-FTIR). The structural changes were studied qualitatively, mainly from the polymeric chain breaking, branching and oxidation to distinguish the degradation profile. The variations of crystallinity & carbonyl index were also studied quantitatively according to the characteristic peaks intensity & area ratio. Finally, the relationships between structural changes and mechanical properties were investigated. The results showed that the polymeric chain breaking & branching play a leading role before 3 months in the aging progress. Then oxidation phenomena gradually takes place during 3~6 months. The chain branching & oxidation were predominant factors after 6 months. Nine months later, the oxidation was saturated gradually. Furthermore, the aging process is positively correlated to the temperature and irradiation. After 12 months aging, the carbonyl index increased by 112 times and crystallinity was 10% higher than before. The tensile/bending modulus deceased faster than tensile/bending strength of HDPE. The linear degree of tensile modulus and carbonyl index was 0.97. The degree of linearity of tensile strength and crystallinity calculated by feature bands (720~730 cm-1) was 0.96. It showed that the mechanical properties of HDPE can be speculated from the structural changes by ATR-FTIR.
郭骏骏,晏 华*,包河彬,王雪梅,胡志德,杨健健 . 衰减全反射红外光谱法的高密度聚乙烯自然老化特性研究 [J]. 光谱学与光谱分析, 2015, 35(06): 1520-1524.
GUO Jun-jun, YAN Hua*, BAO He-bin, WANG Xue-mei, HU Zhi-de, YANG Jian-jian . Attenuated Total Reflection Infrared Spectroscopy for Degradation Profile of High Density Polyethylene after Weathering Aging . SPECTROSCOPY AND SPECTRAL ANALYSIS, 2015, 35(06): 1520-1524.
[1] Ammala A, Bateman S, Dean K, et al. Progress in Polymer Science, 2011, 36(8): 1015. [2] Gauthier E, Laycock B, Cuoq F J J M, et al. Polymer Degradation and Stability, 2013, 98(1): 425. [3] Rajandas H, Parimannan S, Sathasivam K, et al. Polymer Testing, 2012, 31(8): 1094. [4] Celina M C. Polymer Degradation and Stability, 2013, 98(12): 2419. [5] Kupper L, Gulmine J, Janissek P, et al. Vibrational Spectroscopy, 2004, 34(1): 63. [6] Lambert S, Sinclair C J, Bradley E L, et al. Science of the Total Environment, 2013, 447: 225. [7] Carrasco F, Surina J, Colom X. Journal of Applied Polymer Science, 1996, 60(2): 153. [8] Carrasco F, Pages P, Pascual S, et al. European Polymer Journal, 2001, 37(7): 1457. [9] Awaja F, Gilbert M, Naebe M, et al. Polymer Degradation and Stability, 2013, 98(9): 1699. [10] Zerbi G, Gallino G, Del Fanti N, et al. Polymer, 1989, 30(12): 2324. [11] Jelle B P, Nilsen T N. Construction and Building Materials, 2011, 25(4): 2122. [12] Jeon H J, Kim M N. Biodegradation, 2013, 24(1): 89. [13] Santos R M, Botelho G L, Cramez C, et al. Polymer Degradation and Stability, 2013, 98(10): 2111.