Optimizing Color Rendering for Mixed-Color White Light LED
YU Chun-yu1, JIN Peng2, ZHOU Qi-feng3
1. College of Optoelectronic Engineering, Nanjing University of Posts and Telecommunications, Nanjing 210023, China 2. Green Lighting Lab, School of Environment and Energy, Peking University Shenzhen Graduate School，Shenzhen 518055, China 3. Laster Tech Electronics Corporation Ltd.，Dongguan 523751, China
Abstract：To optimize color rendering of mixed-color LEDs, the Gaussian model was used to analyze the color-mixed LED’s spectrum power distribution. The peak wavelength “λm”，spectral half width “Δλ” and amplitude “A” were basic parameters for optimizing color rendering R9, which is very important for objects to be colorful and vivid under the white light LED’s illuminating. The typical methods for color mixing were used to get white light LEDs. Result was that to get the satisfied color rendering index, one of the color primaries should be certain and then other color primaries would be analyzed through changing three basic parameters step by step. It was concluded that the analysis in this paper would be referential to optimize the color-mixed white LED’s color rendering.
Key words：Mixed-color;White light LED;Spectral power distribution;Color rendering
[1] Kang Jeong-Jin, Um Keehong, Yoo Sooyeup, et al. International Journal of Control and Automation, 2013, 6(4): 423. [2] Moreno I, Contreras U. Optics Express, 2007, 15(6)：3607. [3] YANG Wu, HE Guo-xing(杨 武, 何国兴). Applied Laser(应用激光), 2012, 23(6): 532. [4] He Guoxing, Yan Huafeng. Optics Express, 2011, 19(3): 2519. [5] XIA Tian, HE Hua-qiang, LIU Yuan-hong, et al(夏 天, 何华强, 刘元红, 等) . China Illuminating Engineering Journal(照明工程学报), 2011, 22(5): 95. [6] TIAN Li, LIU Yu-ling, YU Fei-hong(谭 力, 刘玉玲, 余飞鸿). Optical Instruments(光学仪器), 2004, 26(4): 41. [7] HU Bo(胡 波). China Illuminating Engineering Journal(照明工程学报), 1996, 7(2): 27. [8] CHENG Wen-ting, SUN Yao-jie, TONG Li-qing, et al(程雯婷, 孙耀杰, 童立青, 等). China Illuminating Engineering Journal(照明工程学报), 2011, 22(3): 37.
