Abstract：Surface glossiness is one of the important visual appearance parameters of natural polymer material (wood) and its related products. To realize the fast measurement of natural polymer material surface glossiness is of great significance to the online quality control and assessment of its surface. In order to broaden the application of near infrared (NIR) spectroscopy in the field of polymer material surface quality control and realize the feasibility of NIR as a fast measurement of surface glossiness , the NIR combined with partial least squares(PLS) analysis were used to analyse the correlations of natural polymer material wood surface glossiness between the NIR predicted and lab measured, and then to investigate the feasibility of NIR to rapidly predict the surface glossiness of natural polymer material wood.The results showed that the wood NIR diffuse reflectance spectroscopy regularly varied with the different wood surface glossiness, from which we can concluded that the NIR spectrums reflected the information of wood surface glossiness. The correlation coefficients of surface glossiness between the PLS models predicted and lab measured were up to 0.90. Additionally, by changing the degree between the fiber and sample surface, we collected the different wood NIR spectrums, the accuracy of NIR surface glossiness models based on these NIR spectrums had not significantly improved, and models based on the NIR spectrums collected by the 90 degree between the fiber and sample surface performed better.
刘亚娜，杨 忠*，吕 斌，张毛毛，王兴华 . 木材表面光泽度的近红外漫反射光谱技术快速测定研究 [J]. 光谱学与光谱分析, 2014, 34(03): 648-651.
LIU Ya-na, YANG Zhong*, Lü Bin, ZHANG Mao-mao, WANG Xing-hua . Study of Rapid Prediction of Wood Surface Glossiness by Near Infrared Spectroscopy . SPECTROSCOPY AND SPECTRAL ANALYSIS, 2014, 34(03): 648-651.
[1] Farrokhpay S, Morris G E, Fornasiero D, et al. Journal of Coatings Technology and Research, 2006, 3(4): 275. [2] Faucheu J, Wood K A, Sung L P, et al. Journal of Coatings Technology and Research, 2006, 3(1): 29. [3] Sousa F J P, Júnior N V, Weingaertner W L, et al. Journal of Materials Science, 2007, 42(24): 10124. [4] LENG Cai-feng, GUO Ling-hua, LIU Guo-dong, et al(冷彩凤, 郭凌华, 刘国栋，等). Packaging Engineering(包装工程), 2012, 33(11): 112. [5] Schaller C, Rogez D. Journal of Coatings Technology and Research, 2007, 4(4): 401. [6] CHEN Xiao-li, PAN Biao(陈潇俐, 潘 彪). China Forestry Science and Technology(林业科技开发), 2006, 20(2): 29. [7] LIU Yi-xing, LI Jian, GUO Ming-hui, et al(刘一星, 李 坚, 郭明晖, 等). Journal of Northeast Forestry University(东北林业大学学报), 1995, 23(1): 52. [8] Wu J H, Peng Y K, Li Y Y, et al. Journal of Food Engineering, 2012, 109(2): 267. [9] Falla F S, Larini C, Le Roux G A C, et al. Journal of Petroleum Science and Engineering, 2006, 51(1-2): 127. [10] Pfautsch S, Macfarlane C, Ebdon N, et al. Trees, 2012, 26(3): 963. [11] Inagaki T, Schwanninger M, Kato R, et al. Wood Science and Technology, 2012, 46(1-3): 143. [12] Jones P D, Schimleck L R, Peter G F, et al. Wood Science and Technology, 2005, 39(7): 529.
