Abstract:Near infrared spectroscopy was applied to rapidly predict microfibril angle (MFA) and fiber length of Neosinocalamus affinis Keng by using a fiber-optic probe in diffuse reflectance mode. The MFA and fiber length were measured by X-ray diffractometry and optical microscope, respectively. Partial least squares (PLS) was used to build models based on raw and pretreated spectra, including noise spectra and noise combined with orthogonal signal correction (OSC) spectra. The results showed that the PLS models of MFA and fiber length, based on noise combined with OSC spectra, gave the strongest correlations, with correlation coefficient (R) of 0.893 6 and 0.988 3 and root mean standard error of prediction (RMSEP) of 0.292 0 and 0.146 0 in prediction set. The correlations between NIR predicted and MFA/fiber length actual values are very good. Therefore, it is concluded that MFA and fiber length of N. affinis can be estimated by NIR spectroscopy with sufficient accuracy.
Key words:Near infrared spectroscopy;Partial least squares;Orthogonal signal correction;Neosinocalamus affinis Keng;Microfibril angle;Fiber length
孙柏玲,柴宇博,黄安民,刘君良* . 近红外光谱法在慈竹微纤丝角和纤维长度分析中的应用 [J]. 光谱学与光谱分析, 2011, 31(12): 3251-3255.
SUN Bai-ling, CHAI Yu-bo, HUANG An-min, LIU Jun-liang* . Application of NIR Spectroscopy to Estimate of MFA and Fiber Length of Neosinocalamus affinis . SPECTROSCOPY AND SPECTRAL ANALYSIS, 2011, 31(12): 3251-3255.
[1] JIANG Ze-hui(江泽慧). Bamboo and Rattan in the World(世界竹藤). Shenyang: Liaoning Science and Technology Publishing House(沈阳:辽宁科学技术出版社), 2002. 388. [2] HE Tian-jian(何天健). Journal of Bamboo Research(竹子研究汇刊), 1991, 10(4): 62. [3] JIANG Jian-xin, YANG Zhong-kai, ZHU Li-wei, et al(蒋建新,杨中开,朱莉伟,等). Journal of Beijing Forestry University(北京林业大学学报), 2008, 30(1): 128. [4] ZHOU Fang-chun(周芳纯). Bamboo Research(竹类研究), 1998, (1): 178. [5] MA Ling-fei, HAN Hong, MA Nai-xun, et al(马灵飞,韩 红,马乃训,等). Journal of Zhejiang Forestry College(浙江林学院学报), 1994, 11(3): 274. [6] Schimleck L R, Evans R, Matheson A C. Journal of Wood Sci.,2002, 48(2): 132. [7] Jones P D, Schimleck L R, Peter G F, et al. Can. J. Forest Research, 2005, 35: 85. [8] Kelly S S, Rials T G, Snell R, et al. Wood Sci. Technol.,2004, 38(4): 257. [9] Via B K, Shupe T F, Stine M, et al. Holzals Roh-und Werkstoff, 2005, 63(3): 231. [10] Schimleck L R, Jones P D, Peter G F, et al. Holzforschung, 2004, 58(4): 375. [11] Haukssom J B, Bergqvist G, Bergsten U, et al. Wood Science and Technology, 2001, 35(6): 475. [12] ZHAO Rong-jun, ZHANG Li, HUO Xiao-mei, et al(赵荣军,张 黎,霍小梅,等). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2010, 30(9): 2355. [13] WANG Yu-rong, QIN Dao-chun, REN Hai-qing, et al(王玉荣,覃道春,任海青,等). Wood Processing Machinery(木材加工机械), 2007, 18(3): 34. [14] Wold S, Antti H, Lindgren F, et al. Chemometrics and Intelligent Laboratory Systems, 1998, 44: 175. [15] CHU Xiao-li, YUAN Hong-fu, LU Wan-zhen(褚小立,袁洪福,陆婉珍). Progress in Chemistry(化学进展), 2004, 16(4): 528.