Abstract:A new type of surface ion-imprinted polymer was synthesized in aqueous media with sodium trititanate whisker in the presence of Cd(Ⅱ), chitosan and γ-glycidoxypropyl trimethoxysilane (KH-560). A batch of adsorption experiments were performed to evaluate its adsorption of Cd(Ⅱ) using inductively coupled plasma atomic emission spectrometry (ICP-AES). The factors affecting adsorption capacity, including pH and sorbent amount, were discussed. The adsorption kinetics and adsorption isothermals were also obtained. The Langmuir isotherm can fit in the experimental equilibrium data. Under the optimum conditions, the value of the adsorption was above 99 %, and the maximum adsorption capacity was 52.34 mg·g-1. In accordance with the parameters distribution coefficient (Kd) and selectivity coefficient (K), the selectivity for Cd(Ⅱ) of the prepared imprinted polymer was estimated. Finally, the adsorption mechanism was discussed and the detection limit of 0.024 μg·mL-1 with the relative standard deviation (RSD) of 1.74% (c=1.0 μg·mL-1, n=13) for Cd(Ⅱ) was obtained. Results showed that the surface Cd(Ⅱ)-imprinted polymer was a solid sorbent with high efficiency, low-cost, convenient separation/enrichment for environmental trace Cd(Ⅱ).
[1] Rao T P, Daniel S, Gladis J M. Trends Anal. Chem.,2004, 23: 28. [2] WANG Pei-long, FAN Li, SONG Rong, et al(王培龙,范 理,宋 荣,等). Chinese J. Anal. Chem.(分析化学), 2007, 35(9): 1319. [3] Praveen R S, Daniel Sobhi, Prasada Rao T. Talanta, 2005, 66: 513. [4] Na J, Chang X J, Hong Z, et al. Anal. Chim. Acta,2006, 577: 225. [5] LEI Qi-fu, ZHONG Shi-an, XIANG Hai-yan, et al(雷启福, 钟世安, 向海艳,等). Chinese J. Anal. Chem.(分析化学), 2005, 33(6): 857. [6] YANG Zheng-liang, FENG Gui-ying, HU Shi-bin(杨正亮, 冯贵颖, 呼世斌). Agricultural Research in the Arid Areas(干旱地区农业研究),2005, 23(1): 219. [7] Gupta V K, Rastogi A. Journal of Hazardous Materials, 2008, 153: 759. [8] ZHAO Li-xia, LIN Jin-ming(赵利霞, 林金明). Chinese Journal of Analysis Laboratory(分析试验室), 2006, 25(2): 110. [9] Shripal, Maurya D, Shalini. Materials Science and Engineering B, 2007, 136(1): 5. [10] LI Chun-xiang, DENG Yue-hua, YAN Yong-sheng(李春香, 邓月华, 闫永胜). Metallurgical Analysis(冶金分析), 2008, 28(4): 54. [11] Li Feng, Jiang Hongquan, Zhang Shusheng. Talanta, 2007, 71: 1487. [12] Yen Ming-Tsung, Yang Joan-Hwa, Mau Jeng-Leun. Carbohydrate Polymers, 2009, 75: 15. [13] Wang Lijie, Zhang Tong, Qi Qi, et al. Mater Lett., 2009,63: 903. [14] Benhammou A, Yaacoubi L, Nibou B, et al. J. Coll. Interface Sci., 2005,282:320.