Optimization of Data Quality Objectives Under Control of Near Infrared System for Diesel Cetane Number
LI Ying1, PAN Zhi-qiang2, WANG Dou-wen3*
1. Dalian Product Quality Inspection and Testing Institute, Dalian 116021, China
2. West Pacific Petrochemical Company, Dalian 116600, China
3. Dalian Customs Technical Center, Dalian 116001, China
Abstract：The DQO modeling for the NIR-CN system has not yet seen mature research results, in which comparison with data from the Waukesha CN engine was conducted to alleviate the composite matrix effect of matching error and the uncontrollable β risk at a single level. Compared to the power function, quadratic linear combination, and slope radian angles, the DR bias correction model's maximum likelihood estimate is found to be the best-fitting line. The DR modeling, which was derived from the variable iteration of two-dimensional data weighted by the CSS, was established under the premise of the i.i.d. assumption. Consequently, the correlation coefficient cannot be regarded as the criterion for judging the model, but rather through the lack of fit and the AD goodness-of-fit test. This test can effectively mitigate the cumulative impact and interaction interference of ACF, and maximize compensation for the limitations of subjective trend analysis in control charts. The research results indicate that the DR model aligns more closely with the DQO robustness and the actual situation of the NIR system. The NIR system was previously limited to a single CN level discussion; now it has been expanded to study variations at multiple levels. Different decisions lead to different uncertainties, and wrong decisions will incur additional cost losses. Under the uniform principle of risk and cost, the variation of CN over time will inevitably lead to the choice of CSS. As long as the DQO set by the NIR system is subsequently met, the risk arising from the use conditions can be controlled within the demonstrated CSS range.
Key words：Data quality objectives;Deming regression;Centered Sum of Squares;Lack of fit;Independence identical distribution;Autocorrelation function
李 颖，潘志强，王斗文. 柴油十六烷值近红外系统受控下数据质量目标的优化[J]. 光谱学与光谱分析, 2025, 45(09): 2535-2542.
LI Ying, PAN Zhi-qiang, WANG Dou-wen. Optimization of Data Quality Objectives Under Control of Near Infrared System for Diesel Cetane Number. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2025, 45(09): 2535-2542.
[1] Standardization Administration of the People's Republic of China（国家标准化管理委员会）. GB/T 386—2021 Standard Test Method for Cetane Number of Diesel Fuel Oil（GB/T 386 —2021柴油十六烷值测定法），2021.
[2] WANG Dou-wen，DENG Yun（王斗文，邓 云）. Top-Down Uncertainty Evaluation of Quality Control in Inspection and Testing Laboratory（检验检测实验室质量控制技术top-down不确定度评定）. Beijing：China Quality and Standards Publishing Medica Co., Ltd.（北京：中国质检出版社/中国标准出版社），2017.
[3] Palma C, Morgado V，da Silva R J N B. Talanta，2019，192：278.
[4] Rigo-Bonnin R, Blanco-Font A，Canalias F. Clinical Biochemistry，2018，57：56.
[5] Wang D W, Sun H R, Pan Z Q, et al. Journal of Testing and Evaluation，2017，45（2）：703.
[6] Moralles H F，Rebelatto D A N，Sartoris A. Mathematical and Computer Modelling，2013，58（9）：1648.
[7] Datsiou K C，Overend M. Structural Safety，2018，73：29.
[8] Jantschi L，Bolboaca S D. Mathematics，2018，6（6）：88.
[9] Berlinger M，Kolling S, Schneider J. Glass Structures & Engineering，2021，6：195.
[10] WANG Dou-wen，ZHAO Xue-rong，ZENG Ze，et al（王斗文，赵雪蓉，曾 泽，等）. Spectroscopy and Spectral Analysis（光谱学与光谱分析），2004，24（10）：1248.
[11] Everest L，Chen B E，Hay A E，et al. BMC Medical Research Methodology，2023，23：179.
[12] Wang D W, Sun Z J, Zhang W Q, et al. Journal of Testing and Evaluation，2024，52（4）：2257.
