Abstract：Absorbing materials are an effective supplement to external stealth technology. After electromagnetic waves enter the interior of absorbing materials, they should be rapidly and maximally attenuated. Therefore, when we design the electromagnetic parameters of absorbing materials, impedance matching should be considered to maximize the entry of electromagnetic waves into the material. On the other hand, it is necessary to ensure that all electromagnetic waves entering the material are attenuated as much as possible. For absorbing materials, it means that the material must have a large imaginary part of the dielectric constant and magnetic permeability, which can cause attenuation of electromagnetic wave energy. Traditional microwave-absorbing materials mainly focus on microwaves. With the development of technology, terahertz radar has been put into use. It is necessary to study and explore whether traditional microwave absorbing materials can effectively attenuate in the terahertz and even infrared frequency bands and evaluate these absorbing materials in the terahertz frequency band. Two types of absorbing material plates are studied in-depth by the terahertz time-domain spectrum, Fourier transform spectral system, and microwave anechoic chamber measurement system based on a vector network analyzer. The microwave, terahertz, and infrared bands measured the reflectivity of radar-absorbing materials from 1 GHz to 180 THz.The measurement results indicate that as the frequency increases, the surface morphology and roughness of the absorbing material have a certain impact on the reflectivity. Further research has been conducted on the changes in the reflection characteristics of the absorbing material with angles in the terahertz and infrared bands. To further study the absorption principle of the absorbing material in the terahertz and infrared frequency bands, the absorbing layer was peeled off from the metal lining plate and measured. The reflectivity and transmittance of the absorbing coating at 2~180 THz were obtained, and the equivalent dielectric parameters of the composite absorbing material were calculated based on the Kamers-Kronig relation. The test results showed that the absorbing material still has a certain absorption ability in the terahertz and infrared. Infrared is not sufficient to penetrate the reflective coating of the absorbing material to reach the metal lining plate, and its absorption mainly comes from reflection absorption and scattering from the surface of the absorbing material.
蔡 禾，李粮生，朱先立，李进春，孙 旺，朱 勇，殷红成. 微波吸波材料在太赫兹、红外段反射谱测量研究[J]. 光谱学与光谱分析, 2024, 44(10): 2745-2752.
CAI He, LI Liang-sheng, ZHU Xian-li, LI Jin-chun, SUN Wang, ZHU Yong, YIN Hong-cheng. Study on the Measurement of Reflection Spectra of Microwave Absorbing Materials in the Terahertz and Infrared Regions. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2024, 44(10): 2745-2752.
[1] HU Rui, YANG Wei-tao, SHI Xian-rui, et al（胡 睿，杨伟涛，石先锐，等）. China Adhesives（中国胶粘剂），2018，27（10）：56.
[2] Nie Y, He H H, Gong R Z, et al. Journal of Magnetism and Magnetic Materials，2007，310(1): 13.
[3] Tehrani M K, Ghasemi A, Moradi M, et al. Journal of Alloys & Compounds, 2011, 509(33): 8398.
[4] Qu Yuangang, Chen Hua, Qin Xiaochun, et al. Biochimica Et Biophysica Acta-Proteins & Proteomics, 2007, 1774(12): 1614.
[5] Han P Y, Tani M, Usami M, et al. Journal of Applied Physics, 2001, 89(4): 2357.
[6] Arts K, Vervuurt R, Bhattacharya A, et al. Journal of Applied Physics, 2018, 124(7): 073105-1.
[7] ZHANG Zheng, HUANG Yu, JIN Chen, et al（张 正，黄 玉，金 晨，等）. Journal of Beijing Normal University (Natural Science)[北京师范大学学报（自然科学版）]，2017，53（3）：272.
[8] Zhang Z M, Choi B I, Flik M I. Journal of the Optical Society of America B-Optical Pysics, 1994, 11(11): 2252.
[9] Roessler D M. British Journal of Applied Physics, 1965, 16(8): 1119.
[10] CAI He, ZHANG Jing, ZHENG Yan, et al（蔡 禾, 张 景, 郑 岩, 等）. Spectroscopy and Spectral Analysis（光谱学与光谱分析）, 2021, 41(1): 105.
[11] Peiponen K E, Gornov E, Svirko Y, et al. Physical Review B，2005, 72(24)：245109.
