Study of Factors Influencing the Length of Argon Plasma Jets at
Atmospheric Pressure With Needle Ring Electrodes
TIAN Fu-chao1, CHEN Lei2*, PEI Huan2, BAI Jie-qi1, ZENG Wen2
1. Department of State Key Laboratory of Coal Mine Safety Technology, CCTEG Shenyang Research Institute, Shen Fu Demonstration Area, Shenyang 113122, China
2. Department of Aero-engine, Shenyang Aerospace University, Shenyang 110136, China
Abstract:A multi-structure needle-ring electrode argon plasma jet device was designed to grasp the quantitative influence of the reactor structure parameters and discharge parameters on the jet length of the atmospheric pressure non-equilibrium plasma jet (N-APPJ). The effects of discharge voltage, electrode gap, the distance between the discharge end of the high-voltage electrode and the ground electrode, and the volume flow of argon on the jet length were calculated. The results show that the maximum length of the plasma jet can reach 80mm; the longer the distance between the discharge end of the high voltage electrode and the ground electrode, the longer the jet length but not linearly; the jet length first increases and then decreases with the increase of the electrode gap, and the jet reaches the maximum length when the electrode gap is 4.5 mm; with the increase of the volume flow of argon, the length of the plasma jet also shows a trend of first increasing and then decreasing, and the decreasing amplitude is low; the electron excitation temperature It is higher at the high-voltage electrode and the ground electrode, and the part between the two electrodes is second, and there will be a more obvious drop at the outlet of the quartz tube.
田富超,陈 雷,裴 欢,白洁琪,曾 文. 针环式电极大气压下氩气等离子体射流长度影响因素研究[J]. 光谱学与光谱分析, 2023, 43(12): 3682-3689.
TIAN Fu-chao, CHEN Lei, PEI Huan, BAI Jie-qi, ZENG Wen. Study of Factors Influencing the Length of Argon Plasma Jets at
Atmospheric Pressure With Needle Ring Electrodes. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(12): 3682-3689.
[1] HU Jian-hang, FANG Zhi, ZHANG Cheng, et al(胡建航,方 志,章 程,等). Materials Reports(材料导报),2007,21(9): 71.
[2] Teschke M, Kedzierski J, Finantu-Dinu E G, et al. IEEE Transactions on Plasma Science, 2005, 33(2): 310.
[3] Kedzierski J, Engemann J, Teschke M, et al. Solid State Phenomena, 2005, 107: 119.
[4] Lu X P, Laroussia M. Journal of Applied Physics, 2006, 100: 063302.
[5] Park H S, Kim S J, Joh H M, et al. Physics of Plasma, 2010, 17: 33502.
[6] Yong C H, Soon C, Jong H K, et al. Physics of Plasmas, 2007, 14: 074502.
[7] LI Xue-chen, CHEN Jun-yu, JIA Peng-ying, et al(李雪辰, 陈俊宇, 贾鹏英, 等). Journal of Hebei University(Natural Science Edition)[河北大学学报(自然科学版)],2021, 41(5): 495.
[8] Schbatzadeh F, Omran A V. Physics of Plasmas, 2014, 21: 113510.
[9] SONG Fei-long, JIN Di, JIA Min, et al(宋飞龙, 金 迪, 贾 敏, 等). Spectroscopy and Spectral Analysis(光谱学与光谱分析),2018, 38(6): 1675.
[10] LIN De-feng, LUO Shu-hao, LIAO Guang-fan, et al(林德锋, 罗书豪, 廖广凡, 等). Sichuan Electric Power Technology(四川电力技术),2015, 38(5): 56.
[11] J A M van der Mullen. Physics Reports, 1990, 191(2-3): 109.
[12] YE Chao(叶 超). Principle and Technology of Low Temperature Plasma Diagnosis(低温等离子体诊断原理与技术). Beijing: Science Press(北京: 科学出版社),2021. 6.
[13] GE Yuan-jing, ZHANG Guang-qiu, CHEN Qiang(葛袁静, 张广秋, 陈 强). Plasma Science and Technology and Its Application in Industry(等离子体科学技术及其在工业中的应用). Beijing: China Light Industry Press(北京: 中国轻工业出版社),2011. 1.