%A LI Hui-zhi;PEI Mei-shan;ZHANG Jin;WEI Qin %T Flow-Injection Chemiluminescence Determination of Trace Copper On-Line Separation and Enrichment by Ion Imprinted Polymer %0 Journal Article %D 2011 %J SPECTROSCOPY AND SPECTRAL ANALYSIS %R 10.3964/j.issn.1000-0593(2011)06-1472-04 %P 1472-1475 %V 31 %N 06 %U {https://www.gpxygpfx.com/CN/abstract/article_4873.shtml} %8 2011-06-01 %X In the present study, Cu(Ⅱ)-imprinted polymer was prepared and used as an effective method for separation and enrichment of Cu(Ⅱ) ion in samples. An on-line preconcentration and extraction flow-injection system using solid phase extraction (SPE) column packed with prepared ion imprinted polymer (IIP) was set up. The column was eluted with a mixture of ethanol and H2SO4 after preconcentration. A sensitive and simple chemiluminescence(CL) method using flow-injection has been developed for the determination of copper. The method is based on the fact that traces of Cu(Ⅱ) exert a catalytic action on the oxidation between morin by KMnO4 solution. After optimizing the different experimental parameters, a calibration graph was obtained over the concentration range of 0 to 10 μg·mL-1 for Cu(Ⅱ) and r=0.996 8. The detection limit is 0.001 2 μg·mL-1. The recoveries are between 95% and 105% and the standard relative deviations( RSD) are less than 3% at 4.0 μg·mL-1 (n=9) level was obtained. The new chemiluminescence determination for copper has been established. The method can be satisfactorily applied to the determination of copper in sample.