| 光谱学与光谱分析 |
|
|
|
|
|
| Influence of Slide-Blown on Plasma Characterization of Laser Dressing for Bronze-Bonded Diamond Wheel by a Fiber Laser |
| ZHANG Yong, CHEN Gen-yu*, ZHOU Cong, DENG Hui, XU Jian-bo，ZHOU Xing-cai |
| State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha 410082, China |
|
|
|
|
Abstract The effects of assistant side-blown operating parameters on the behavior of plasma characteristics and plasma geometry were studied with the aid of high-speed camera in laser dressing of bronze-bonded diamond grinding wheel. The results showed that: high pressure argon plasma reduces swelling height, and as the pressure increases, argon blowing side of the plasma effect is more obvious. Plasma emission spectrum was studied on the grinding wheel radial maximum value with the change in argon gas pressure through the acquisition of plasma emission spectroscopy using spectrometer, and according to the Boltzmann slash and Stark broadening method, the maximal values of plasma electron temperature and electron density in the wheel radial were calculated. It was found that the plasma spectral line intensity first increased and then decreased as gas pressure reached the peak at 0.2 MPa, Larger argon pressure can significantly reduce the temperature and density of plasmas. With optical 3D scanner the wheel surface topography before and after adding side-blown gas was compared. The results indicated that: the topography of grinding wheel with 0.5 MPa side-blown argon is better than that without adding side-blown gas.
|
|
Received: 2013-07-15
Accepted: 2013-10-09
|
|
|
|
Corresponding Authors:
CHEN Gen-yu
E-mail: hdgychen@163.com
|
|
[1] Ramesh Babu N, Radhakrishnan V, Murti Y V G S. Journal of Manufacturing Science and Engineering, 1989, 111(3): 244.
[2] KANG Ren-ke, YUAN Jing-ting, SHI Xing-kuan, et al(康仁科，原京庭，史兴宽, 等). China Mechanical Engineering(中国机械工程), 2000, 11(5): 493.
[3] CHEN Gen-yu, ZHU Ding-jun, PENG Kai, et al(陈根余，朱定军，彭 凯，等). Chinese Journal of Lasers(中国激光), 2007, 34(sl): 245.
[4] CHEN Gen-yu, CHEN Guo-gui, HUANG Kong, et al(陈根余，陈国桂，黄 孔，等). Chinese Journal of Lasers(中国激光), 2009, 36(5): 1278.
[5] Christian Walter, Mohammad Rabiey. CIRP Annals-Manufacturing Technology, 2012, (61): 279.
[6] WANG Xu-yue, XU Yun-fei, XU Wen-ji, et al(王续跃，徐云飞，徐文骥，等). China Mechanical Engineering(中国机械工程), 2008, 19(6): 725.
[7] XIN Ren-xuan(辛仁轩). Plasma Emission Spectrum Analysis(等离子体发射光谱分析). Beijing: Chemical Industry Press(北京: 化学工业出版社), 2011. 15.
[8] ZHENG Guo-hua, JI Zi-hua, YU Xing(郑国华，计子华，余 兴). Atomic Emission Spectrum Analysis Technology and Application(原子发射光谱分析技术及应用). Beijing: Chemical Industry Press(北京：化学工业出版社), 2009. 47.
[9] LI Xia-fen, ZHOU Wei-dong, QIAN Hui-guo, et al(李霞芬，周卫东，钱惠国, 等). Acta Optica Sinica(光学学报), 2011, 31(11): 1130001-1.
[10] LIU Yue-hua, CHEN Ming, LIU Xiang-dong, et al(刘月华，陈 明，刘向东，等). Acta Physica Sinica(物理学报), 2013, 62(2): 025203.
[11] Griem H R. Plasma Spectroscopy. New York: McGraw Hill, 1964. 483.
[12] CONG Ran, ZHANG Bao-hua, FAN Jian-mei, et al(从 然，张保华, 樊建梅，等). Acta Optica Sinica(光学学报), 2009, 23(9): 2594.
[13] LU Tong-xing, ZHAO Xian-zhang, CUI Zhi-feng(陆同兴，赵献章，崔执凤). Journal of Atomic and Molecular Physics(原子与分子物理学报), 1994, 11(2): 120.
[14] ZHANG Jing, CAI Yan(张 菁, 蔡 艳). Hot Working Technology(热加工工艺), 2012, 41(3): 104. |
| [1] |
LIU Shu-hong1, 2, WANG Lu-si3*, WANG Li-sheng3, KANG Zhi-juan1, 2，WANG Lei1, 2，XU Lin1, 2，LIU Ai-qin1, 2. A Spectroscopic Study of Secondary Minerals on the Epidermis of Hetian Jade Pebbles From Xinjiang, China[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2024, 44(01): 169-175. |
| [2] |
TIAN Fu-chao1, CHEN Lei2*, PEI Huan2, BAI Jie-qi1, ZENG Wen2. Study of Factors Influencing the Length of Argon Plasma Jets at
Atmospheric Pressure With Needle Ring Electrodes[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(12): 3682-3689. |
| [3] |
LIU Hong-wei1, FU Liang2*, CHEN Lin3. Analysis of Heavy Metal Elements in Palm Oil Using MP-AES Based on Extraction Induced by Emulsion Breaking[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(10): 3111-3116. |
| [4] |
LIU Pan1, 2, 3, DU Mi-fang1*, LI Bin1, LI Jing-bin1, ZENG Lei1, LIU Guo-yuan1, ZHANG Xin-yao1, 4, ZHA Xiao-qin1, 4. Determination of Trace Tellurium Content in Aluminium Alloy by
Inductively Coupled Plasma-Atomic Emission Spectrometry Method[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(10): 3125-3131. |
| [5] |
ZHU Yu-qi1, 2, ZHANG Xin2, DU Pan-pan2, LIU Shu1, ZHANG Gui-xin1, 2, GUAN Song-lei2*, ZHENG Zhong1*. Infrared Spectroscopy and X-Ray Spectroscopy Combined With
Inductively Coupled Plasma Mass Spectrometry for Quality
Control of Mongolian Medicine Yu Grain Soil[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(10): 3163-3169. |
| [6] |
YANG Fan1, HAO Liu-cheng1, KE Wei2, LIU Qing1, WANG Jun1, CHEN Min-yuan2, YUAN Huan2*, YANG Ai-jun2, WANG Xiao-hua2, RONG Ming-zhe2. Research on Effect of Laser Incident Angle on Laser-Induced Plasma at Low Pressure[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(09): 2740-2746. |
| [7] |
ZHANG Zhi-fen1, LIU Zi-min1, QIN Rui1, LI Geng1, WEN Guang-rui1, HE Wei-feng2. Real-Time Detection of Protective Coating Damage During Laser Shock Peening Based on ReliefF Feature Weight Fusion[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(08): 2437-2445. |
| [8] |
YAN Ming-liang1, ZHANG Chen-long2, ZHAO Lian-xiang3, ZHAO Hua-he4, GAO Xun2*. Spectral Characteristics of Ge Plasma Induced by Femtosecond Pulsed Laser Ablation[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(07): 2095-2098. |
| [9] |
LI Chang-ming1, CHEN An-min2*, GAO Xun3*, JIN Ming-xing2. Spatially Resolved Laser-Induced Plasma Spectroscopy Under Different Sample Temperatures[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(07): 2032-2036. |
| [10] |
LI Shi-lun1, LIU Tao2, SONG Wen-min3, WANG Tian-le2, LIU Wei1, CHEN Liang1, LI Zhi-gang2*, FENG Shang-shen1*. Study of Two-Dimensional Ordered Magnetic Co Nanosphere Array Film Construction and Its Optical Properties[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(07): 2037-2042. |
| [11] |
YUAN Shu, WU Ding*, WU Hua-ce, LIU Jia-min, LÜ Yan, HAI Ran, LI Cong, FENG Chun-lei, DING Hong-bin. Study on the Temporal and Spatial Evolution of Optical Emission From the Laser Induced Multi-Component Plasma of Tungsten Carbide Copper Alloy in Vacuum[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(05): 1394-1400. |
| [12] |
LIN Jing-tao, XIN Chen-xing, LI Yan*. Spectral Characteristics of “Trapiche-Like Sapphire” From ChangLe, Shandong Province[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(04): 1199-1204. |
| [13] |
ZHANG Liang1, ZHANG Ran2, CUI Li-li3, LI Tao1, GU Da-yong4, HE Jian-an2*, ZHANG Si-xiang1*. Rapid Modification of Surface Plasmon Resonance Sensor Chip by
Graphene Oxide[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(03): 795-800. |
| [14] |
YU Cheng-hao, YE Ji-fei*, ZHOU Wei-jing, CHANG Hao*, GUO Wei. Characteristics of the Plasma Plume and Micro-Impulse Generated by
Irradiating the Aluminum Target With a Nanosecond Laser Pulse at
Oblique Incidence[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(03): 933-939. |
| [15] |
ZHENG Li-na1, 2, XUAN Peng1, HUANG Jing1, LI Jia-lin1. Development and Application of Spark-Induced Breakdown Spectroscopy[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(03): 665-673. |
|
|
|
|
