光谱学与光谱分析 |
|
|
|
|
|
Influence of Y3+, Bi3+ Content on Photoluminescence of YVO4∶Dy3+ Phosphor Induced by Ultraviolet Excitation |
HE Yu-yang, ZHAO Mai-qun*, SONG Yan-yan, ZHAO Gao-yang, LI Feng |
The Faculty of Material Science and Engineering, Xi’an University of Technology, Xi’an 710048, China |
|
|
Abstract YxVO4∶0.01Dy3+ and Y0.99-xVO4∶0.01Dy3+, xBi3+ phosphors were synthesized by chemical co-precipitation method. Their crystal structure, micromorphology and photoluminescence (PL) properties were investigated by X-ray diffraction (XRD), scan electron microscopy (SEM) and spectrofluorometer. YxVO4∶0.01Dy3+ and Y0.99-xVO4∶0.01Dy3+, xBi3+ phosphors have a broad excitation band from about 250 to 350 nm including a strongest peak at about 310 nm. Under its excitation, the emission spectra exhibits two sharp peaks, one of which centered at about 483 nm for 4F9/2→6H15/2 transition of Dy3+ and the other at about 574 nm due to the 4F9/2→6H13/2 transition of Dy3+. For YxVO4∶0.01Dy3+ (x=0.94, 0.97, 0.99, 1.01, 1.03) phosphor, with increasing value of x, the body color of phosphor changes from yellow to white and the strongest peak in the excitation spectra shifts a little to shorter wavelength. It is detrimental to luminous intensity when Y3+ content deviates stoichiometric ratio. For Y0.99-xVO4∶0.01Dy3+, xBi3+ (x=0.01, 0.05, 0.1, 0.15, 0.2, 0.25) phosphor, the samples have extraneous bismuth vanadium oxide phase except for the major tetragonal zircon structure when x≥0.20. With increasing value of x, the band edge in the excitation spectra shifts to longer wavelength, the excitation intensity and luminous intensity increase early and decrease late. When the value of x is 0.01, the intensities increase evidently. In addition, the influence of Y3+ or Bi3+ on the color temperature of emission and micromorphology of YVO4∶Dy3+ is slight.
|
Received: 2010-08-11
Accepted: 2010-11-25
|
|
Corresponding Authors:
ZHAO Mai-qu
E-mail: zhaomq@mail.xaut.edu.cnIntroduction
|
|
[1] Limiao Chen, Guocong liu, Younian Liu. Journal of Materials Processing Technology, 2008, 198: 129. [2] Singh L Robindro, Ningthoujam R S, Singh N Shanta. Optical materials, 2009, 32: 286. [3] WANG Zhi-jun, LI Pan-lai, PANG Li-bin(王志军, 李盼来, 庞立斌). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2010, 30(1): 18. [4] Wang Yuhua, Zuo Yinyan, Gao Hui. Materials Research Bulletin, 2006, 41: 2147. [5] Jia Guang, Song Yanhua, Yang Mei. Optical Materials, 2009, 31: 1032. [6] Zhou Y H, Lin J. Journal of alloys and Compounds, 2006, 408-412: 856. [7] He Fei, Yang Piaoping, Niu Na. Journal of Colloid and Interface Science, 2010, 343: 71. [8] Wang Juan, Xu Yunhua, Hojamberdiev Mirabbos. Journal of Alloys and Compounds, 2009, 487: 358. [9] Yan Bing, Su Xueqing, Zhou Kun. Materials Research Bulletin, 2006, 41: 134. [10] Sun Jiayue, Xian Jianbo, Xia Zhiguo. Journal of Luminescence, 2010, 130: 1818. [11] Zhang Hongwu, Fu Xiaoyan, Niu Shuyun. Materials Letters, 2007, 61: 308. [12] Su Xue-Qing, Yan Bing. Journal of Non-Crystalline Solids, 2005, 351: 3542. [13] Park W J, Jung M K, Yoon D H. Sensors and Actuators B, 2007, 126: 324. [14] Satoru Takeshita, Tetsuhiko Isobe, Tomohiro Sawayama. Journal of Luminescence, 2009, 129: 1067.
|
[1] |
WANG Lin-xiang1, 2, 3, ZHU Heng-jiang2, WU Ling-yuan1, 3, DENG Kai-mo1, 3, GUO Chang-xin1, YIN Min1, 3* . Synthesis and Luminescent Properties of LuAG∶Ce3+ Transparent Ceramics by Solvo-Thermal Method[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2011, 31(02): 308-313. |
|
|
|
|