基于液相AFM及干涉频谱法的多孔氧化铝薄膜在线测量系统研究

doi:10.3964/j.issn.1000-0593.2008.07.025

Abstract
References
Related Citation (12)

Download: PDF (1485 KB)
Export: BibTeX | EndNote (RIS)

Abstract An in-situ measurement system for porous alumina (PA) film based on atomic force microscope (AFM) in liquid and reflectometric interference spectroscopy (RIFS) was developed. The present article briefly discusses the principle and structure of the system, and introduces its unique characteristic. The system consists of probe unit, XY scanner, Z-piezo feedback system, computer and software, fiber optic spectrometer, anodization control circuitry etc. When a white light beam illuminates the surface of the film, the reflective light beams at the front and back side of the layer are coherent, and lead to periodical amplifications and extinction in the reflective spectrum with the information of the optical thickness of the film. A fiber optic spectrometer was applied in the system which input the refractive spectrum into the computer by which the optical thickness of the film was calculated. Meanwhile according to the surface topography of PA films by AFM in liquid, the effective refractive index was calculated based on Maxwell-Garnett theory and coherent potential approximation (CPA). So the thickness of PA films could be gained at last. To checkout the feasibility and stability of the system, the real-time scanning and thickness measurement experiments were done during anodization of Al sheets in oxalic acid aqueous solution. In the experiment, the authors used 25 mm diameter aluminum (Al) sheets with 99.999% purity and 0.4 mm thickness as the anode, and graphite rod as the cathode. The pretreatment-cleaned Al sheets were anodized in an aqueous solution of 0.5 mol·L^-1 oxalic acid at the constant temperature (20±0.2) ℃ with 20 mA·cm^-2 anodization electronic current density. Real-time AFM images of PA film were successfully obtained during anodization. The pore-ratios of Al sheet were 7.81% and 13.83% at oxidizing time 150 min and 180 min respectively. Correspondingly, the effective indexes were calculated to be 1.62 and 1.60, respectively. Combining the reflective spectrum gained by the fiber optic spectrometer, the wave number differences between the two adjacent extrema were 57.69 mm^-1 and 50.00 mm^-1. Based on reflectometric interference spectroscopy, the thickness of PA films was found to be 5.35 and 6.25 μm with oxidizing time 150 min and 180 min respectively. The system has characteristics of convenient manipulation, non-destructive and high-resolution in-situ measurement. And the surface morphology, pore-ratio and effective refractive index can also be gained at the same time.

Key words：Porous alumina;AFM in liquid;Pore-ratio;Reflectometric interference spectroscopy;In-situ thickness measurement

Received: 2007-03-28 Accepted: 2007-06-29

ZTFLH:

O657.3

Corresponding Authors: ZHANG Dong-xian E-mail: zhangdx@zju.edu.cn

Cite this article:

LIU Chao,ZHANG Dong-xian,ZHANG Hai-jun. Study of In-Situ Measurement System for Porous Alumina Film Based on AFM and Reflectometric Interference Spectroscopy[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2008, 28(07): 1679-1683.

URL:

https://www.gpxygpfx.com/EN/10.3964/j.issn.1000-0593.2008.07.025 OR https://www.gpxygpfx.com/EN/Y2008/V28/I07/1679

［1］ Sauer G, Brehm G, Schneider S, et al. Journal of Applied Physics, 2002, 91(5)：3243.
［2］ Sui Y C, Cui B Z, Guardian R, et al. Carbon, 2002, 40(7)：127.
［3］ Sander M S, Prieto A L, Gronsky R, et al. Advanced Materials, 2002, 14(9)：665.
［4］ Fan S S, Chapline M G, Franklin N R R R, et al. Science, 1999, 283(5404)：512.
［5］ Collier C P, Wong E W, Belohradsky M, et al. Science, 1999, 285(5428)：391.
［6］ YAN Jin-liang(闫金良). Acta Photonica Sinica(光子学报), 2005, 34(10)： 1530.
［7］ Lakshmi B B, Martin C R. Nature, 1997, 388(21)：758.
［8］ Dmitric R, Tager A A, Junji H, et al. IEEE Transactions on Electron Devices, 1996, 43(13)：1646.
［9］ Li A P, Muller F, Birner A, et al. Journal of Applied Physics, 1998, 84(11)：6023.
［10］ Chen Z, Lei Y, Chew H G, et al. Journal of Crystal Growth, 2004, 268：560.
［11］ REN Gang, XU Ru-qing, HAN Li, et al(任刚, 许如清, 韩立, 等). Physics(物理), 2003, 32(1)： 36.
［12］ LI Dong-dong, ZHU Xu-fei, MENG Da-wei, et al(李东栋, 朱绪飞, 孟大伟, 等). Electronic Components ＆ Materials(电子元件与材料), 2005, 24(12)： 64.
［13］ Laaziz Y, Bennouna A, et al. Thin Solid Films, 2000, 372：149.
［14］ YANG Peng, XU Zhi-ling, XU Lei(杨鹏, 徐志凌, 徐雷). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2000, 20(3)： 243.
［15］ Lazarouk S, Jaguiro P, et al. Thin Solid Films,1997, 297： 97.
［16］ LI Han-ru(李翰如). Introduction to Dielectric Physics(电介质物理导论). Chengdu： Chengdu Scientific University Press(成都：成都科技大学出版社), 1990： 232.
［17］ Boettcher C J F, Bordewijk P. Theory of Dielectric Polarization. 2nd ed. Amsterdam：Elsevier. 1973： 561.
［18］ Sui YuCheng, Saniger Jose M. Materials Letters，2001, 48：127.
［19］ Nielsch K, Choi J, Schwire K, et al. Nano letters,2002, 2(7)： 677.
［20］ ZHANG Dong-xian, ZHANG Hai-jun, LIN Xiao-feng, et al(张冬仙, 章海军, 林晓峰, 等). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2006, 26(3)： 411.