水下湿法焊接引弧过程等离子体温度及电子数密度研究

doi:10.3964/j.issn.1000-0593(2020)11-3404-05

Abstract
References
Related Citation (13)

Download: PDF (2244 KB)
Export: BibTeX | EndNote (RIS)

Abstract Underwater wet welding technology has been widely used in recent years, however, there is a lack of research on its mechanism. In this paper, the plasma temperature and electron density of the arc-inducing process of underwater wet welding are studied by means of spectral analysis. Firstly, the underwater wet welding arc spectrum diagnostic platform was built, and the current, voltage and spectral signals in the welding process were collected synchronously. The arc strike process is defined based on the analyzed current and voltage signal data. On this basis, the spectral signals of 5, 10, 15, 20 and 25 ms are collected by the time delay recording function of the spectrometer. The Fe element line and the H element line required to calculate the plasma temperature and ionization density are calibrated. In order to ensure the accuracy and reliability of the calculation results, five sets of data were selected at different times of the arcing, and the five sets of data were averaged. Five suitable spectral lines were selected in the calibrated Fe element line, and the underwater wet welding arc plasma temperature at different times of the arcing was calculated by Boltzmann diagram method. According to the H_α spectrum detected by the spectrometer, combined with the Stark line broadening theory of plasma emission spectroscopy, the electron number density at different moments of underwater wet welding arc is calculated. The calculation results show that the temperature changes of underwater wet welding arc plasma show different characteristics at different moments of arc ignition，In the arcing 5 and 20 ms respectively, the temperature values appear peak respectively, and the temperature value reaches 4 414 K at the last steady arc time. The electron number density also differs at different times of the arcing, and also peaks at 5 and 20 ms. The changing trend of arc plasma temperature and electron number density at different timings of arc ignition verified the formation of arc accompanied by the breakdown of space gap. The calculation results can further explore the physical nature of underwater wet welding arc-ignition process from the perspective of arc physics, and provide an important reference for guiding and seeking more effective arc-ignition methods.

Key words：Underwater wet welding; Arc spectroscopy; Arc ignition; Plasma temperature; Electron number density

Received: 2019-09-17 Accepted: 2020-01-15

ZTFLH:

TG115

Cite this article:

URL:

https://www.gpxygpfx.com/EN/10.3964/j.issn.1000-0593(2020)11-3404-05 OR https://www.gpxygpfx.com/EN/Y2020/V40/I11/3404

[1] MA Yun-he, LI Zhi-zun, SUN Li-ming et al(马云鹤，李志尊，孙立明, 等). Hot Working Technology(热加工工艺), 2018, 47(17): 10.
[2] Sun Q J, Cheng W Q, Liu Y B, et al. Materials & Design, 2016, 103: 63.
[3] WANG Jian-feng, SUN Qing-jie, ZHANG Shun, et al(王建峰, 孙清洁, 张顺, 等). Journal of Mechanical Engineering(机械工程学报), 2018, 54(14): 50.
[4] TANG Ying-ying, ZHU Zhi-ming, YANG Zhong-yu, et al(汤莹莹, 朱志明, 杨中宇, 等). Transactions of the China Welding Institution(焊接学报), 2018, 39(3): 21，129.
[5] CHEN Chao, FAN Cheng-lei, LIN San-bao, et al(陈超, 范成磊, 林三宝, 等). Transactions of the China Welding Institution(焊接学报), 2018, 39(12): 9，129.
[6] LAN Sheng, ZHANG Jing(兰生, 章婧). Electric Machines and Control(电机与控制学报), 2015, 19(3): 96.
[7] Ralchenko Y, Kramida A E, Reader J, et al. NIST Atomic Spectradatabase[DB/OL]. [2019-04-10]. http://www.nist.gov/pml/data/asd.cfm.
[8] LIU Ying(刘莹). Research on Arc Characteristic of TIG Welding Filled by Flux-Cored Wire(药芯焊丝TIG焊的电弧特性研究). Tianjin University(天津大学), 2017.
[9] ZHANG Zhi-qiang, ZHANG Guo-gang, QIE Shuang, et al(张志强, 张国钢, 郄爽, 等). Electrical & Energy Management Technology(电器与能效管理技术), 2016，(22): 57.
[10] GUO Wei, GUO Ning, DU Yong-peng, et al(郭伟，郭宁，杜永鹏，等). Transactions of the China Welding Institution(焊接学报)，2016，37（10）：13.
[11] Spectroscopy. Study Findings from University of Cordoba Broaden Understanding of Spectroscopy (Simple and Analytical Function for the Stark Profile of the H-Alpha Line and Its Application to Plasma Characterization). Science Letter, 2018.
[12] XIN Ren-xuan(辛仁轩). Plasma Emission Spectrum Analysis(等离子体发射光谱分析). Beijing: Chemical Industry Press(北京：化学工业出版社)，2018.
[13] SHI Li-nan(石里男). Mechanism Analysis on Welding Arc Starting Process(焊接电弧引燃过程的机理分析). Beijing University of Technology(北京工业大学), 2011.