|
|
|
|
|
|
A Measurement Method Base on FWHM for Determining Junction Temperature of LED |
JIANG Fu-chun1, HE Si-yu1, LIU Yuan-hai1, LIU Wen1*, CHAI Guang-yue1, 2, LI Bai-kui1, PENG Dong-sheng1 |
1. College of Physics and Photoelectric Engineering,Shenzhen University, Shenzhen 518000, China
2. College of New Energy and New Materials,Shenzhen Technology University, Shenzhen 518000, China |
|
|
Abstract In this paper, a measurement system based on the FWHM (Full Width Half Maximum) method for junction temperature of LED is designed, which uses ordinary spectrometer. First, the relative spectral distribution of various color LEDs under different ambient temperatures and driving currents are measured by a general spectrometer. Since the spectral data collected by the spectrometer are discrete, in order to obtain a more accurate FWHM, it is necessary to fit the discrete spectral data into a continuous peak near the half of the strongest peak value Imax, i. e. 0.5Imax. So, the more accurate FWHM at different temperatures can be calculated and then the functional relationship between junction temperature Tj and FWHM can be obtained by fitting a certain function. Experiments show that the linear relationship between Tj-FWHM function of white and blue LED is higher than that of other color LED, and its linear index R2 is very close to 1. It shows that the two parameters of Tj and FWHM have strong linear function relationship. Using the functional relationship between Tj and FWHM, the junction temperature corresponding to any measured value FWHM can be calculated. Because this method uses the normal driving current, the self-heating effect can not be neglected. In order to reduce the junction temperature rise of LED devices caused by self-heating effect in fixed reaction time and the measurement error caused by the temperature deviation introduced by temperature control system, Tj and FWHM in a certain state are selected as the reference state, and the corresponding Tj and FWHM are obtained by point-by-point difference method, and then the corresponding ΔTj and ΔFWHM are obtained. ΔTj and ΔFWHM are fitted into corresponding linear functions to obtain the calibration function, which can greatly reduce the deviation caused by the self-heating effect and temperature control system. Finally, the results obtained by this method are compared with those obtained by T3Ster instrument of Mentor Graphics. It is found that the deviation is 2.5%, which is within the acceptable error range. The results show that the proposed method of measuring the junction temperature of LED by the FWHM method is feasible. This method overcomes the shortcomings of small peak wavelength drift of spectroscopy, which brings great errors to the test results, and has the advantages of not destroying the original packaging structure and not requiring expensive instruments.
|
Received: 2019-06-16
Accepted: 2019-10-09
|
|
Corresponding Authors:
LIU Wen
E-mail: liuwen@szu.edu.cn
|
|
[1] CHEN Ying-cong, WEN Shang-sheng, WU Yu-xiang(陈颖聪,文尚胜,吴玉香). Acta Optica Sinica(光学学报), 2013, 33(8): 0823005.
[2] Senawiratne J, Chatterjee A, Detchprohm T, et al. Thin Solid Films, 2010, 518(6): 1732.
[3] DENG Hui, LÜ Yi-jun, GAO Yu-lin, et al(邓 辉,吕毅军,高玉琳,等). Acta Optica Sinica, 2012, 32(6): 0623001.
[4] CHEN Huan-ting, LÜ Yi-jun, CHEN Zhong, et al(陈焕庭,吕毅军,陈 忠,等). Acta Optica Sinica, 2009, 29(3): 805.
[5] Hong E, Narendran N. Proceedings of SPIE, 2004, 5187: 93.
[6] Xi Y,Schubert E F. Applied Physics Letters, 2004, 85:2163.
[7] XU Yu-zhen, LIN Wei-ming(徐玉珍,林维明). Acta Optica Sinica, 2013, 33(5): 0523001.
[8] Gu Y, Narendran N. Proceedings of SPIE, 2004, 5187: 107.
[9] Fan H Y. Physical Review, 1951, 82(6): 900.
[10] ZHAO Wei-qiang,LIU Hui,CAI Qian, et al(赵伟强,刘 慧,蔡 骞,等). China Measurement & Test(中国测试),2010,36(6): 17.
[11] Pan Y, Wu M, Su Q. J. Phys. Chem. Solids, 2004, 65: 845.
[12] Lin Y, Gao Y L, Lu Y J, et al. Applied Physics Letters, 2012, 100(20): 202108. |
[1] |
HAN Zhao-xia1, 2, 3*, YANG Zhi-jin1, ZHANG Zhi-hong1, DING Shu-hui1, ZHANG Da-wei1, 2, 3, HONG Rui-jin1, 2, 3, TAO Chun-xian1, 2, 3, LIN Hui1, 2, 3, YU De-chao1, 2, 3. Preparation of Full-Color Carbon Quantum Dots and Their Application in WLED[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(05): 1358-1366. |
[2] |
LIU Hong-yuan1, WU Bin1, 2, JIANG Tao3, YANG Yan-zhao1, WANG Hong-chao1, LI Jing-song1. Study on the Measurement of Absolute Spectral Responsivity of Terahertz Detector[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2023, 43(04): 1017-1022. |
[3] |
ZHENG Xu-gang1, 2, SONG Dan-dan1, 2, ZHAO Su-ling1, 2, QIAO Bo1, 2, SHEN Chong-yu3, XU Zheng1, 2*. Effect of Water Vapor Treatment on the Performance of Quantum Dot Light-Emitting Diodes[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2020, 40(04): 1034-1039. |
[4] |
XU Jian-wen1, 2 , CHEN Guo-qing1, 2*, WU Ya-min1, 2, MA Chao-qun1, 2, GU Jiao1, 2. Establishment of the Spectral Equation of Two Phosphor-Coated White LEDs[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2020, 40(03): 799-803. |
[5] |
CUI Can1,2, SONG Dan-dan1,2, ZHAO Su-ling1,2, QIAO Bo1,2, XU Zheng1,2*. Improving the Efficiency of Solution-Processed, Blue Fluorescent Organic Light-Emitting Diodes (OLEDs) by Employing TADF Exciplex Hosts[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2020, 40(03): 700-705. |
[6] |
LING Liu-yi1, 3*, WEI Ying2, HUANG You-rui1, HU Ren-zhi3, XIE Pin-hua3*. Calibration Method of Broadband Cavity Enhanced Absorption Spectroscopy for Measuring Atmospheric NO2[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2018, 38(03): 670-675. |
[7] |
LI Song-yu, GUO Wei-ling*, SUN Jie, CHEN Yan-fang, LEI Jun . Effect of Junction Temperature on EL Spectra of GaN-Based White High Voltage LEDs [J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2017, 37(01): 37-41. |
[8] |
ZHAI Rui-wei, ZHAO You-quan*, MIAO Pei-liang, JIANG Nan, JIANG Lei, LIU Xiao, XU Qiao-yan . Study on the Spectral Characteristics of Xeon Flash Lamp and Experimental Measurement[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2016, 36(08): 2674-2678. |
[9] |
GUAN Yun-xia1, CHEN Li-jia1, CHEN Ping2, FU Xiao-qiang1, NIU Lian-bin1,3* . Influence of MnO3 on Photoelectric Performance in Organic Light Emitting Diodes[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2016, 36(03): 648-652. |
[10] |
YANG Song-tao1,4,5, WANG Jing3, WANG Li-dong2, LIANG Pei1*, DONG Qian-min1 . Photoelectric Parametric Test System of LED Based on Virtual Instrument [J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2014, 34(11): 2912-2917. |
[11] |
LI Xue1, SHAO Qiu-ping1, CHEN Shu-fen2*, HUANG Wei2 . Highly Efficient, Color-Stable White Top-Emitting Organic Light-Emitting Diodes[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2014, 34(09): 2360-2364. |
[12] |
DAI Shuang, YU Tong-jun*, LI Xing-bin, YUAN Gang-cheng, LU Hui-min . The Electroluminescence Spectra of InGaN/GaN Blue LEDs During Aging Time [J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2014, 34(02): 327-330. |
[13] |
HUANG Qing-yu1,2, ZHAO Su-ling1,2*, XU Zheng1,2, FAN Xing1,2, WANG Jian1,2, YANG Qian-qian1,2 . White Organic Light-Emitting Diodes Applied for Lighting Technology [J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2014, 34(01): 27-33. |
[14] |
YAN Feng, ZHOU Yue*, ZHANG Ming-chao, CHEN Xue . Test Equipment for Relative Spectral Response of CCD [J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2013, 33(10): 2865-2868. |
[15] |
ZHANG Qing-xia1, LONG Dan-dan1, ZHANG Fan2, QI Xiao-hua2, ZHANG Heng1, YAN Jing-hui1*, ZOU Ming-qiang2*. Influence of Bi3+ Doping on Properties of CaMoO4:Eu3+ Phosphors[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2013, 33(07): 1758-1762. |
|
|
|
|