基于光谱分析的综合传动空载磨合磨损规律研究

doi:10.3964/j.issn.1000-0593(2009)04-1013-05

Abstract
References
Related Citation (15)

Download: PDF (1580 KB)
Export: BibTeX | EndNote (RIS)

Abstract The running-in process wear rule of power-shift steering transmission can be studied conveniently and timely by using spectral analysis of oil. The configuration characteristic and the running-in mechanism of power-shift steering transmission were introduced firstly in the present paper. According to the discussion of running-in wear factors such as load, rotation speed, time, oil temperature, shifting number and original concentration of running-in oil, the wear calculation mode was established. The no-load running-in experiments of two power-shift steering transmissions were done, with different rotation speed and time. Based on the spectrum analysis of experiment result, the function relation between running-in wear and the oil original concentration and running-in speed was obtained, so the no-load running-in process wear calculation mode of power-shift steering transmission was confirmed. Through the experiment of other two power-shift steering transmissions, it was validated that the Cu element concentration can be calculated accurately by the wear calculation mode, which included the parameters such as oil original concentration, running-in speed, running-in time and gear shift alternate time. So the reference to evaluate the running-in quality and to constitute running-in regulations was gained.

Key words：Power-shift steering transmission;Spectrum analysis;Running-in;Wear

Received: 2007-12-02 Accepted: 2008-03-06

ZTFLH:	U461.2
	TH117

Corresponding Authors: LI He-yan E-mail: lheyan@sohu.com

Cite this article:

LI He-yan,WANG Li-yong,MA Biao, et al. Study on No-Load Running-in Wear of Power-Shift Steering Transmission Based on Oil Spectrum Analysis[J]. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2009, 29(04): 1013-1017.

URL:

https://www.gpxygpfx.com/EN/10.3964/j.issn.1000-0593(2009)04-1013-05 OR https://www.gpxygpfx.com/EN/Y2009/V29/I04/1013

[1] Vladimirov B A(Soviet)(弗拉基米罗夫B A(苏)). Running-in of Marine Diesel Engine(船舶柴油机磨合运转). Beijing: National Defense Industry Press(北京：国防工业出版社) ，1986. 3.
[2] LI Zhu-guo, WEI Shi-ming, YU Wu-quan, et al(李柱国, 尉世明, 俞五全, 等). Chinese Internal Combustion Engine Engineering(内燃机工程), 2001, 22(1): 66.
[3] WEI Hai-jun，SUN Pei-ting，YIN Feng(魏海军，孙培廷，尹峰, 等). Transactions of CSICE(内燃机学报)，2005，23(1)：88.
[4] YANG Yu-wei, CHEN Guo(杨虞微，陈果). Spectroscopy and Spectral Analysis(光谱学与光谱分析)，2005，25(8)：1339.
[5] ZHANG Hong，LI Zhu-guo，CHEN Zhao-neng(张红，李柱国，陈兆能). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2004，24(5)：619.
[6] WEI Hai-jun，WANG Hong-zhi，SUN Pei-ting, et al(魏海军，王宏志，孙培廷, 等). Spectroscopy and Spectral Analysis(光谱学与光谱分析)，2005，25(7)：1125.
[7] GAN Min-liang, ZUO Hong-fu, YANG Zhong, et al(干敏梁，左洪福，杨忠，等). Spectroscopy and Spectral Analysis(光谱学与光谱分析)，2000，20(1)：64.
[8] FENG Neng-lian, LI Ke-qiang, LIAN Xiao-min, et al(冯能莲, 李克强, 连小珉, 等). Journal of Tsinghua University(Science and Technology)(清华大学学报·自然科学版), 2003, 43(2): 254.
[9] MA Hong-wen, MA Biao(马洪文，马彪). Journal of Mechanical Strength(机械强度), 2002, 24(4): 489.
[10] ZHENG Chang-song, MA Biao, WAN Yao-qing, et al(郑长松, 马彪, 万耀青, 等). China Mechanical Engineering(中国机械工程), 2006, 17(9)：975.
[11] CHEN Shi-wei, LI Zhu-guo, XU Qi-sheng(陈士玮，李柱国，徐启圣). Chinese Internal Combustion Engine Engineering(内燃机工程)，2006, 27(1): 63.
[12] WEN Shi-zhu(温诗铸). Friction Theory(摩擦学原理). Beijing: Tsinghua University Press(北京：清华大学出版社), 2002. 341.
[13] MA Biao(马彪). Journal of Beijing Institute of Technology(北京理工大学学报英文版), 2000, 4(9): 362.
[14] TAN Da-jiang, MA Biao, WAN Yao-qing, et al(谭大江, 马彪, 万耀青, 等). Drive System Technique(传动技术), 2001, 15(1): 18.