Preparation of MgxZn1-xO Nanofibers Using PVP Nanofibers as Templates by Atom Layer Deposition and Their Optical Properties
JIA Hui-min1, TANG Ji-long1*, FANG Xuan1*, WANG Shuang-peng2, ZHAO Hai-feng2, FANG Dan1, WANG Xiao-hua1, FANG Fang1, LI Jin-hua1, CHU Xue-ying1, WEI Zhi-peng1, MA Xiao-hui1, XU Li1
1. State Key Laboratory of High Power Semiconductor Laser, School of Science, Changchun University of Science and Technology,Changchun 130022, China 2. Key Laboratory of Excited State Process, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China
Abstract:In the present paper, MgxZn1-xO nanofibers with different doping concentration were prepared by atom layer deposition (ALD) using polyvinyl pyrrolidone (PVP) nanofibers as template, which were synthesized by electrospinning. The influence of different Mg doping concentration on the structure and optical properties of composite nanofibers was investigated. The samples were characterized by field emission scanning electron microscopy (FESEM), ultraviolet visible (UV-Vis)absorption spectroscopy and photoluminescence (PL) spectra. The doping of Mg did not change the morphologies of ZnO nanofibers, the morphologies of all the samples were very similar while the diameter of MgxZn1-xO-PVP composite nanofibers became larger after doping. With the increase in the Mg doping concentration, the absorption edge shifted to larger energy side, revealing the band gap tenability of MgxZn1-xO nanofibers. Meanwhile, a significant blue shift of the UV emission peak from 377 to 362 nm was observed in PL spectra. Compared with ZnO-PVP composite nanofibers, the UV emission intensity of MgxZn1-xO-PVP composite nanofibers was much stronger. Component control MgxZn1-xO nanofibers can be synthesized by this method. The doping of Mg elements in ZnO can effectively improve the band gap of ZnO-PVP nanofibers and the intensity of UV emission.
[1] Niinist L. Current Opinion in Solid State and Materials Science, 1998, 3(2): 147. [2] Sun K, Jing Y, Park N, et al. Journal of the American Chemical Society, 2010, 132(44): 15465. [3] Fang F, Zhao D X, Li B H, et al. Applied Physics Letters, 2008, 93(23): 233115. [4] Lai Y Y, Lan Y P, Lu T C. Light: Science & Applications, 2013, 2(6): e76. [5] Gruber T, Kirchner C, Kling R, et al. Applied Physics Letters, 2004, 84(26): 5359. [6] Yu D Q, Hu L Z, Li J, et al. Applied Surface Science, 2009, 255(8): 4430. [7] Fang X, Li S, Wang X, et al. Applied Surface Science, 2012, 263: 14. [8] Guo Z, Zhang H, Zhao D, et al. Applied Physics Letters, 2010, 97(17): 173508. [9] Müller J, Weissenrieder S. Fresenius’ Journal of Analytical Chemistry, 1994, 349(5): 380. [10] Lim J, Lee C. Thin Solid Films, 2007, 515(7): 3335. [11] Zhao M, Wang X, Ning L, et al. Journal of Alloys and Compounds, 2010, 507(1): 97. [12] Chen X, Kang J. Semiconductor Science and Technology, 2008, 23(2): 025008. [13] DONG Li-na, WANG Yu-xin, SUN Jing-chang, et al(董李娜, 王玉新, 孙景昌, 等). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2013, 33(8): 2051. [14] Choopun S, Vispute R D, Yang W, et al. Applied Physics Letters, 2002, 80(9): 1529. [15] Auret F D, Goodman S A, Hayes M, et al. Applied Physics Letters, 2001, 79(19): 3074. [16] Kim D H, Koo H J, Jur J S, et al. Nanoscale, 2012, 4(15): 4731. [17] Liu K, Sakurai M, Aono M. Sensors, 2010, 10(9): 8604. [18] You T, Yan J, Zhang Z, et al. Materials Letters, 2012, 66(1): 246. [19] Li D, Xia Y. Advanced Materials, 2004, 16(14): 1151. [20] Li S, Leng J, Fan Y, et al. Physica Status Solidi (a), 2011, 208(1): 114. [21] Agrawal A, Dar T A, Sen P. Journal of Nano-& Electronic Physics, 2013, 5(2): 02025. [22] Gao J, Zhao Q, Sun Y, et al. Nanoscale Research Letters, 2011, 6(1): 1. [23] Djurisic A B, Ng A M C, Chen X Y. Progress in Quantum Electronics, 2010, 34(4): 191. [24] Das P P, Agarkar S A, Mukhopadhyay S, et al. Inorganic Chemistry, 2014, 53(8): 3961. [25] Trndahl T, Platzer-Bjrkman C, Kessler J, et al. Progress in Photovoltaics: Research and Applications, 2007, 15(3): 225. [26] Chien J F, Huang Y H, Chang Y J, et al. ECS Journal of Solid State Science and Technology, 2013, 2(1): P31. [27] Fang D, Fang X, Zhao H F, et al. Advanced Materials Research, 2014, 924: 23. [28] Fang X, Li S, Wang X, et al. Applied Surface Science, 2012, 263: 14.