Rapid Determination of Beet Sugar Content Using Near Infrared Spectroscopy
YANG Yong1,2, REN Jian1, ZHENG Xi-qun1*, ZHAO Li-ying2, LI Mao-mao1
1. Key Laboratory of Processing Agricultural Products of Heilongjiang Province,College of Food and Bioengineering, Qiqihar University,Qiqihar 161006, China 2. College of Food Science,Northeast Agricultural University,Harbin 150030, China 3. Bo-Tian Sugar Limited Company, Beijing 100029, China
Abstract:In order to classify and set different prices on basis of difference of beet sugar content in the acquisition process and promote the development of beet sugar industry healthily, a fast, nondestructive, accurate method to detect sugar content of beet was determined by applying near infrared spectroscopy technology. Eight hundred twenty samples from 28 representative varieties of beet were collected as calibration set and 70 samples were chosen as prediction set. Then near infrared spectra of calibration set samples were collected by scanning, effective information was extracted from NIR spectroscopy, and the original spectroscopy data was optimized by data preprocessing methods appropriately. Then partial least square(PLS)regression was used to establish beet sugar quantitative prediction mathematical model. The performances of the models were evaluated by the root mean square of cross-validation (RMSECV), the coefficient of determination (R2) of the calibration model and the standard error of prediction (SEP), and the predicted results of these models were compared. Results show that the established mathematical model by using first derivative(FD) and standard normal variate transformation(SNV) coupled with partial least squares has good predictive ability. The R2 of calibration models of sugar content of beet is 0.908 3, and the RMSECV is 0.376 7. Using this model to forecast the prediction set including 70 samples, the correlation coefficient is 0.921 4 between predicted values and measured values, and the standard error of prediction (SEP) is 0.439, without significant difference (p>0.05) between predicted values and measured values. These results demonstrated that NIRS can take advantage of simple, rapid, nondestructive and environmental detection method and could be applied to predict beet sugar content. This model owned high accuracy and can meet the precision need of determination of beet sugar content. This detection method could be used to classify and set different prices on basis of difference of beet sugar content in the acquisition process.
Key words:Near infrared spectroscopy (NIRS);Sugar beet;Sugar content;Partial least square
[1] LIU Feng-hua, LI Xun-wei (刘凤华,李洵微). Chinese Journal of Spectroscopy Laboratory(光谱实验室), 1995, 12(4): 31. [2] FU Xia-ping,YING Yi-bin(傅霞萍,应义斌). Transactions of the Chinese Society for Agricultural Machinery(农业机械学报), 2013, 44(8): 148. [3] LIN Wan, PENG Yan-kun, WANG Cai-ping(林 琬,彭彦昆,王彩萍). Transactions of the Chinese Society of Agricultural Engineering(农业工程学报), 2014, 30(7): 243. [4] Kuchejda M, Ramirez S, Yilmaz S. International Sugar Journal, 2005, 107(1277): 302. [5] Haefele D, Sevenich D, Jones D, et al. International Sugar Journal, 2007, 109(1299): 154. [6] Staunton S P, Wardrop K. International Sugar Journal, 2007, 109(1304): 482. [7] Simpson R, Oxley J. International Sugar Journal, 2009, 111(1326): 387. [8] CAO Gan, TAN Zhong-wen, LIANG Ji-nan, et al(曹 干,谭中文,梁计南,等). Journal of South China Agricultural University(华南农业大学学报), 2004, 25(2): 1. [9] HU Yu-hua PAN Tao, CHEN Xing-dan, et al(胡愉华,潘 涛,陈星旦,等). Chinese Journal of Spectroscopy Laboratory(光谱实验室), 2009, 26(1): 90. [10] Zhuang Cui, Chai Xinsheng. China Pulp &Paper Industry, 2011, 32(22): 55. [11] LI Qing-tao,WANG Yuan-hui,CHEN Gang(黎庆涛,王远辉,陈 刚). Science and Technology of Food Industry(食品工业科技), 2012, 33(2): 60. [12] Magana C, Núnez-Sánchez N, Fernández-Cabanás V M, et al. Bioresource Technology, 2011, 102(20): 9542. [13] Jacqueline Maalouly, Luc Eveleigh, Douglas N, et al. Vibrational Spectroscopy, 2004, 36(2):279. [14] Mroczyk W B, Michalski K M. Computers & Chemistry, 1995, 19(3): 299. [15] CHU Xiao-li, WANG Yan-bin, LU Wan-zhen(褚小立,王艳斌,陆婉珍). Physical Testing and Chemical Analysis Part B(Chemical Analysis)(理化检验·化学分册), 2008, 44(8): 796.