Influence of Urea Formaldehyde Resin on Pyrolysis of Biomass: A Modeling Study by TG-FTIR
LI Si-jin, MU Jun*, ZHANG Yu
Key Laboratory of Wooden Material Science and Application of Ministry of Education, College of Materials Science and Technology, Beijing Forestry University, Beijing 100083, China
Abstract:Pyrolysis is an efficient and recycling way to utilize waste wood-based panels, in which urea-formaldehyde resin (UF) is the main difference between wood-based board and other kinds of biomass. The present paper studied the three main components (cellulose, hemicelluloses, lignin) of poplar wood, in order to effectively and environmentally utilize or dispose of waste wood-based panels with pyrolysis technique, to study the influence of urea formaldehyde resin on pyrolytic characteristic of wood during the process of the pyrolysis of waste wood-based panels, and to in-depth explore the mechanism of the effect of UF on each component of wood. Innovatively, the weight-loss character and gas evolution rule of the model (made from cellulose, xylan and lignin, based on the chemical components stud of poplar wood), the main components as well as the ones mixed with UF were analyzed by TG-FTIR (thermogravimetric analyzer coupled to a Fourier transform infrared spectrometer). Results indicated that UF promoted the generation of water and carboxylic acid substances during the cellulose pyrolysis process. UF combined with lignin, formed some kind of unstable nitrogenous structure which produced a large amount of NH3, which took part in the low-temperature (200~300 ℃) pyrolysis of lignin, and directly affected the production of pyrolysis products. It can be concluded that during the process of the pyrolysis of waste wood-based panels, lignin was the one that UF mainly impacted among the three main components of wood.
李思锦,母 军*,张 宇 . 基于TG-FTIR的杨木热解过程中脲醛树脂影响机理的模型物研究 [J]. 光谱学与光谱分析, 2014, 34(06): 1497-1501.
LI Si-jin, MU Jun*, ZHANG Yu . Influence of Urea Formaldehyde Resin on Pyrolysis of Biomass: A Modeling Study by TG-FTIR. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2014, 34(06): 1497-1501.
[1] Peng Y, Shi S, Ingram L. Wood Science and Technology, 2011, 45(4): 627. [2] Feng Y, Mu J, Chen S, et al. BioResources, 2012, 7(4): 4600. [3] CHEN Shi-hua, LI Si-jin, MU Jun(陈世华,李思锦,母 军). Journal of Beijing Forestry University (北京林业大学学报), 2013,35(4): 123. [4] Yang H , Yan R , Chen H, et al. Energy & Fuels, 2005, 20(1): 388. [5] Elyounssi K, Collard F, Mateke J N, et al. Fuel, 2012, 96: 161. [6] Jiang X, Li C, Chi Y, et al. Journal of Hazardous Materials, 2010, 173(1-3): 205. [7] REN Xue-yong, DU Hong-shuang, WANG Wen-liang, et al(任学勇,杜洪双,王文亮,等). Spectroscopy and Spectral Analysis (光谱学与光谱分析), 2012,32(4): 944. [8] LIU Hong-e, LIU Li, SI Hong-guang, et al(刘洪谔,刘 力,斯红光,等). Journal of Zhejiang A & F University(浙江林学院学报), 1995,12(4): 343. [9] Lee S, Fasina O. Journal of Analytical and Applied Pyrolysis, 2009, 86(1): 39. [10] Girods P, Dufour A, Rogaume Y, et al. Journal of Hazardous Materials, 2008, 159(2-3): 210. [11] Liu Q, Wang S, Wang K, et al. Korean Journal of Chemical Engineering, 2009, 26(2): 548. [12] WU Yi-min, HE Fang, ZHAO Zeng-li(吴逸民,何 方,赵增立). Journal of Fuel Chemistry and Technology(燃料化学学报), 2009,37(4): 427. [13] Shafizadeh F, Bradbury A G W. Journal of Applied Polymer Science, 1979, 23(5): 1431.