Research on and Application of the ICP Detection Technology for the Quality of High-Purity Quartz
WANG Ling1, LI Cai-xia1, 2, WANG Yan1, XU Jin-yong3, DUAN Jiong-ran1, DANG Chen-ping1
1. College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, Chengdu 610059, China 2. The Engineering and Technical College of Chengdu University of Technology, Leshan 614000, China 3. College of Nuclear Technology and Automation Engineering, Chengdu University of Technology, Chengdu 610059, China
Abstract:In order to provide the test analysis technology to support the technology development of China high-purity quartz, taking the 4N high-purity quartz made by ourself as experimental samples, we studied the ICP detection technology for the quality of high-purity quartz. The results showed that the digestion and soluble ore is the key of the ICP detection technology for the quality of high-purity quartz. The ICP detection results of high-purity quartz are influenced by the factors including sample weight, reagent combination, reagent consumption and reagent purity. The optimal condition is that: the sample weight is ≥2 000 mg; reagent combination is HF+HNO3; reagent purity is high purity level(MOS or BV-Ⅲ); HF dosage is 25 mL; concentrated HNO3 are used by three times, and the total amount is ≥5 mL. In addition, the samples are not screened by steel sieve in order to avoid iron pollution. And the high-purity quartz should be dissolved in the super-clean laboratory, which may be good for reducing the detection error.
汪 灵1,李彩侠1,2,王 艳1,徐进勇3,段炯然1,党陈萍1 . 高纯石英质量的ICP检测技术研究与应用 [J]. 光谱学与光谱分析, 2013, 33(06): 1684-1688.
WANG Ling1, LI Cai-xia1, 2, WANG Yan1, XU Jin-yong3, DUAN Jiong-ran1, DANG Chen-ping1 . Research on and Application of the ICP Detection Technology for the Quality of High-Purity Quartz . SPECTROSCOPY AND SPECTRAL ANALYSIS, 2013, 33(06): 1684-1688.