Temperature Compensation Strategy and Implementation for Photoelectric Modulation Interferometer with Large Optical Path Difference
WANG Yan-chao1, WANG Zhi-bin1, 2, ZHANG Ji-long1, 2, CHEN You-hua1
1. Engineering Technology Research Center of Shanxi Province for Opto-Electronic Information and Instrument, Taiyuan 030051, China 2. Key Lab of Instrumentation Science & Dynamic Measurement(North University of China), Ministry of Education, Taiyuan 030051, China
Abstract：For temperature drift in hypervelocity photoelectric modulation interferometer, a control model of temperature compensation is presented including voltage and phase compensation. First, according to the similar and modeling theory, an equivalent circuit model of mechanical properties of hypervelocity photoelectric modulation interferometer was established, the impact of temperature drift on its resonance frequency was analyzed, a mathematical model was set up, which contains drive voltage, frequency and resonance frequency, and the control method was determined for high optical path difference to get steady. Then, a digital method including voltage and phase compensation is given for optical path difference deviation control, which merges the DPLL and program of voltage and phase compensation. Finally, the control method was tested through experiment system. A test between drive control system including voltage and phase compensation and traditional drive control system was executed, using a laser doppler vibrometer to record the amount of change in optical path difference within 3 hours. Results show that the optical path difference deviation caused by temperature drift in long term is reduced by about 50%.
