Research Progress on Evaluating the Effects of Nanomaterial-Based Development of Latent Fingerprints
LI Ming1, 2, NI Long1, WANG Meng1, 2*, ZHU Zhong-xu1, YUAN Chuan-jun1, 2, WU Jian3*
1. College of Forensic Sciences, Criminal Investigation Police University of China, Shenyang 110035, China
2. Research Centre of Crime Governance in the New Era, Criminal Investigation Police University of China, Shenyang 110035, China
3. Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
Abstract：Researches on latent fingerprint development using novel nanomaterials including quantum dots, metal and metal oxide nanomaterials, rare-earth doped up- and down-conversion luminescent nanomaterials, carbon dots, metal-organic frameworks, and aggregation-induced emission materials have mushroomed in recent years, resulting in the emergence of nanomaterial-based development of latent fingerprints. Fingerprint development employing nanomaterials has some outstanding advantages such as simple operation, flexible approach, remarkable effect, and wide applicability, which can be served as an important supplement to the traditional techniques. So far, most studies have focused on discovering new nanomaterials and the advancement of new methods for latent fingerprint development. However, research on the influence factors and the comprehensive evaluations for the effects of fingerprint development still remains scattered and unsystematic. The accurate evaluation of fingerprint development effects is of great significance to the reasonable selection of developing methods and the objective assessment of physical evidence. In this review, we systematically summarized the evaluation methodologies on the effects of nanomaterial-based development of latent fingerprints from four aspects, namely, contrast, sensitivity, selectivity, and toxicity. In addition, the influence factors on the effects of latent fingerprint development were discussed in detail. It was summarized that the optical property of the nanomaterials had great effects on the developing contrast, the morphology and size of the nanomaterials had great effects on the developing sensitivity, and the adsorption performance and surface characteristic of the nanomaterials had great effects on the developing selectivity. At the end of this review, we also put forward some prospects for the nanomaterial-based development of latent fingerprints. From the perspective of developing materials, the nanomaterials should be involved in the transition from single luminescent property to multiple luminescent properties, from direct use of available nanomaterials to elaborate control of particle morphology and size, from simple surface treatment to targeted molecule modification, from toxic materials to non-toxic materials. From the perspective of developing strategies, the methods should be involved in the transition from strong background noise to weak fluorescent interference, from clear visualization of minutiae to distinct development of sweat pores, from physical adsorption mechanism to targeted molecule recognition, from effective development of trace evidence to nondestructive detection of biological evidence. While only focusing on improving the effects of fingerprint development, we also suggest researchers pay more attention to the evaluation of development effects, which will greatly promote fingerprint development techniques to play an important role in forensic sciences.
李 明, 倪 龙, 王 猛, 朱中旭, 袁传军，吴 建. 手印纳米显现效果的评价研究进展[J]. 光谱学与光谱分析, 2021, 41(09): 2670-2680.
LI Ming, NI Long, WANG Meng, ZHU Zhong-xu, YUAN Chuan-jun, WU Jian. Research Progress on Evaluating the Effects of Nanomaterial-Based Development of Latent Fingerprints. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2021, 41(09): 2670-2680.
[1] Xu L R, Zhang C Z, He Y Y, et al. Science China-Chemistry, 2015, 58(7): 1090.
[2] Su B. Analytical and Bioanalytical Chemistry, 2016, 408(11): 2781.
[3] Lee H C, Gaensslen R E. Advances in Fingerprint Technology. 2nd ed. Florida: CRC Press, 2001.
[4] Ramotowski R S. Lee and Gaensslen’s Advances in Fingerprint Technology. 3rd ed. Florida: CRC Press, 2013.
[5] Menzel E R, Savoy S M, Ulvick S J, et al. Journal of Forensic Sciences, 2000, 45(3): 545.
[6] Menzel E R, Takatsu M, Murdock R H, et al. Journal of Forensic Sciences, 2000, 45(4): 770.
[7] Liang K, Carbonell C, Styles M J, et al. Advanced Materials, 2015, 27(45): 7293.
[8] Lesniewski A. Synthetic Metals, 2016, 222: 124.
[9] Wang M, Li M, Yu A Y, et al. Advanced Functional Materials, 2017, 27(14): 1606243.
[10] Wang Y Q, Wang J, Ma Q Q, et al. Nano Research, 2018, 11(10): 5499.
[11] JIN Xiao-dong, XIA Xiao-wei, XU Tong-xiang, et al (金晓东, 夏小围, 徐同祥, 等). Chinese Journal of Forensic Sciences(中国司法鉴定), 2020, (1): 35.
[12] Becue A. Analytical Methods, 2016, 8(45): 7983.
[13] WANG Meng, JU JIN-sheng, ZHU Zhong-xu, et al(王 猛, 鞠金晟, 朱中旭, 等). Scientia Sinica Chimica(中国科学: 化学), 2019, 49(12): 1425.
[14] SHEN Dun-pu, LI Ming, YUAN Chuan-jun, et al(沈敦璞, 李 明, 袁传军, 等). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2020, 40(1): 91.
[15] Shen D P, Wang M, Zhu Z X, et al. Talanta, 2021, 231: 122138.
[16] Castello A, Alvarez M, Verdu F. Coloration Technology, 2002, 118(6): 316.
[17] Humphreys J D, Porter G, Bell M. Forensic Science International, 2008, 178(1): 46.
[18] Vanderwee J, Porter G, Renshaw A, et al. Forensic Science International, 2011, 204(1-3): 74.
[19] Matuszewski S, Szafalowicz M. Journal of Forensic Sciences, 2013, 58(5): 1310.
[20] SHEN Dun-pu, WANG Meng, YU Hai-feng, et al(沈敦璞, 王 猛, 于海峰, 等). Journal of Liaoning University·Natural Science Edition(辽宁大学学报·自然科学版), 2019, 46(1): 79.
[21] Wang M, Zhu Y, Mao C B. Langmuir, 2015, 31(25): 7084.
[22] ZHU Zhong-xu, WANG Meng, LI Ming, et al(朱中旭, 王 猛, 李 明, 等). Chinese Journal of Analytical Chemistry(分析化学), 2021, 49(2): 237.
[23] Li Y, Xu L R, Su B. Chemical Communications, 2012, 48(34): 4109.
[24] Algarra M, Radotic K, Kalauzi A, et al. Analytica Chimica Acta, 2014, 812: 228.
[25] He Y Y, Xu L R, Zhu Y, et al. Angewandte Chemie International Edition, 2014, 53(46): 12609.
[26] Xu L R, Li Y, Li S H, et al. Analyst, 2014, 139(10): 2332.
[27] Wang M, Li M, Yu A Y, et al. ACS Applied Materials & Interfaces, 2015, 7(51): 28110.
[28] Wang M, Li M, Yang M Y, et al. Nano Research, 2015, 8(6): 1800.
[29] Wang M. RSC Advances, 2016, 6(43): 36264.
[30] Li B Y, Zhang X L, Zhang L Y, et al. Dyes and Pigments, 2016, 134: 178.
[31] Singh P, Singh H, Sharma R, et al. Journal of Materials Chemistry C，2016, 4(47): 11180.
[32] Li Y Q, Xu C Y, Shu C, et al. Chinese Chemical Letters, 2017, 28(10): 1961.
[33] Rohini B S, Nagabhushana H, Darshan G P, et al. Applied Nanoscience, 2017, 7: 815.
[34] Yadav H J A, Eraiah B, Nagabhushana H, et al. ACS Sustainable Chemistry & Engineering, 2017, 5(3): 2061.
[35] Renuka L, Anantharaju K S, Vidya Y S, et al. Applied Catalysis B: Environmental, 2017, 210: 97.
[36] Basavaraj R B, Nagabhushana H, Darshan G P, et al. Dyes and Pigments, 2017, 147: 364.
[37] Park S J, Kim J Y, Yim J H, et al. Journal of Alloys and Compounds, 2018, 741: 246.
[38] Li F, Liu S Q, Qi R Y, et al. Journal of Alloys and Compounds, 2017, 727: 919.
[39] Chen C L, Yu Y, Li C G, et al. Small, 2017, 13(48): 1702305.
[40] Wang J, Ma Q Q, Liu H Y, et al. Analytical Chemistry, 2017, 89(23): 12764.
[41] Park J Y, Yang H K. Dyes and Pigments, 2017, 141: 348.
[42] Jin X D, Xin R, Wang S F, et al. Sensors and Actuators B: Chemical, 2017, 244: 777.
[43] Yan L, Yu Y L, Xia Z N. Science China-Chemistry, 2018, 61(5): 619.
[44] Marappa B, Rudresha M S, Basavaraj R B, et al. Sensors and Actuators B: Chemical, 2018, 264: 426.
[45] Deepthi N H, Darshan G P, Basavaraj R B, et al. Sensors and Actuators B: Chemical, 2018, 255: 3127.
[46] Babu K R V, Renuka C G, Nagabhushana H. Ceramics International, 2018, 44(7): 7618.
[47] Babu K R V, Renuka C G, Basavaraj R B, et al. Journal of Rare Earths, 2019, 37(2): 134.
[48] Yogananda H S, Nagabhushana H, Darshan G P, et al. Journal of Alloys and Compounds, 2018, 745: 874.
[49] Suresh C, Nagabhushana H, Darshan G P, et al. Arabian Journal of Chemistry, 2018, 11(4): 460.
[50] Cui J B, Xu S Y, Guo C, et al. Analytical Chemistry, 2015, 87(22): 11592.
[51] Dhanalakshmi M, Nagabhushana H, Sharma S C, et al. Materials Research Bulletin, 2018, 102: 235.
[52] Komahal F F, Nagabhushana H, Basavaraj R B, et al. Advanced Powder Technology, 2018, 29(9): 1991.
[53] Navami D, Basavaraj R B, Sharma S C, et al. Journal of Alloys and Compounds, 2018, 762: 763.
[54] Venkataravanappa M, Basavaraj R B, Darshan G P, et al. Journal of Rare Earths, 2018, 36(7): 690.
[55] Park S J, Kim J Y, Yim J H, et al. Journal of Alloys and Compounds, 2018, 741: 246.
[56] Dhanalakshmi M, Nagabhushana H, Darshan G P, et al. Materials Research Bulletin, 2018, 98: 250.
[57] Park J Y, Park S J, Kwak M, et al. Journal of Luminescence, 2018, 201: 275.
[58] Suresh C, Nagabhushana H, Basavaraj R B, et al. Journal of Colloid Interface Science, 2018, 518: 200.
[59] Muniswamy D, Nagabhushana H, Basavaraj R B, et al. ACS Sustainable Chemistry & Engineering, 2018, 6(4): 5214.
[60] Sandhyarani A, Kokila M K, Darshan G P, et al. Chemical Engineering Journal, 2017, 327: 1135.
[61] Jiang B P, Yu Y X, Guo X L, et al. Carbon, 2018, 128: 12.
[62] Peng D, Liu X, Huang M J, et al. Dalton Transactions, 2018, 47(16): 5823.
[63] Yadav H J A, Eraiah B, Basavaraj R B, et al. Journal of Alloys and Compounds, 2018, 742: 1006.
[64] Singh H, Sharma R, Bhargav G, et al. New Journal of Chemistry，2018, 42(15): 12900.
[65] Sharma R, Thiyagarajan S K, Ramamurthy P. Sensors and Actuators B: Chemical, 2018, 258: 184.
[66] Liu R, Song Z, Li Y, et al. Sensors and Actuators B: Chemical, 2018, 259: 840.
[67] HUANG Rui, PENG An(黄 锐, 彭 安). Scientia Sinica Chimica(中国科学: 化学), 2019, 49(12): 1454.
[68] Wang Z L, Jiang X, Liu W B, et al. Science China-Chemistry, 2019, 62(7): 889.
[69] Sandhyarani A, Basavaraj R B, Darshan G P, et al. Optik, 2019, 181: 1139.
[70] Shilpa C J, Basavaraj R B, Darshan G P, et al. Journal of Photochemistry and Photobiology A-Chemistry, 2019, 376: 288.
[71] Shao J Y, Yan J H, Li X G, et al. Dyes and Pigments, 2019, 160: 555.
[72] Dhanalakshmi M, Basavaraj R B, Darshan G P, et al. Microchemical Journal, 2019, 145: 226.
[73] Algarra M, Bartolic D, Radotic K, et al. Talanta, 2019, 194: 150.
[74] Wang M, Shen D P, Zhu Z X, et al. Materials Today Advances, 2020, 8: 100113.
[75] YU Hai-feng, SHEN Dun-pu, JU Jin-sheng, et al(于海峰, 沈敦璞, 鞠金晟, 等). Imaging Science and Photochemistry(影像科学与光化学), 2019, 37(6): 508.
[76] Wang J K, He N, Zhu Y L, et al. Chemical Communications, 2018, 54(6): 591.
[77] Leggett R, Lee-Smith E E, Jickells S M, et al. Angewandte Chemie International Edition, 2007, 46(22): 4100.
[78] Gao F, Han J X, Zhang J, et al. Nanotechnology, 2011, 22(7): 075705.
[79] Li K, Qin W W, Li F, et al. Angewandte Chemie International Edition, 2013, 52(44): 11542.
[80] Ding L F, Peng D, Wang R N, et al. Journal of Alloys and Compounds, 2020, 856: 158160.
[81] LI Ming(李 明). Chemical Research and Application (化学研究与应用), 2020, 32(7): 1207.
[82] Gao F, Han J, Lv C F, et al. Journal of Nanoparticle Research, 2012, 14(10): 1191.
[83] Peng D, Huang M, Xiao Y, et al. Chemical Communications, 2019, 55: 10579.
[84] Yuan C J, Li M, Wang M, et al. Electrochimica Acta, 2021, 370: 137771.
