Study on Alumina/Lanthanum Oxide X-Ray Diffraction and Raman Spectroscopy
WANG Yi1, 2, LI Chang-rong1, 2*, ZHUANG Chang-ling1, 2
1. School of Materials and Metallurgy, Guizhou University, Guiyang 550025, China
2. Guizhou Provincial Key Laboratory of Metallurgical Engineering and Process Energy Saving, Guiyang 550025, China
Abstract：When the size of aluminum oxide inclusions in steels is too large and the edges and corners are sharp, they can be regarded as the main source of cracks during the process of steel wire drawing, and these cracks substantially affect the performance of the steel. The refinement or removal of inclusions in steel is important. Since the amount of alloying elements added to steel is relatively small compared to that in the molten steel and there are errors during the experiments and analyses, the reaction of inclusions is magnified and studied by varying the proportions of rare earth lanthanum oxide powder and alumina at a high temperature of 1 600 ℃. The amount of powder that is added affects the phase change and size of the inclusions. A high-temperature box furnace is set to increase the temperature, keep warm and cool, and X-ray diffraction and Raman spectrometry are used to analyze the specific changes of lanthanum aluminum oxide. The results show that with increasing amounts of La2O3, the LaAl11O18 phase is formed first, followed by the LaAl11O18 and LaAlO3 phases. As the peak intensity decreases, the full width at half maximum increases and the grain size decreases. Then, the characteristic peak intensity of LaAl11O18 disappears, leaving only a decreased amount of the LaAlO3 phase, and no new phase is formed. Combined with the mathematical model for the average grain size of HW, R2 for samples 1#, 2#, 3# and 4# is calculated to be 0.990 25, 0.962 59, 0.987 1, and 0.989 76, and the grain sizes are 6.08, 2.88, 7.67, and 4.75 μm, respectively. Sample 2# has the smallest grain size herein, and sample 3# has the largest grain size herein, indicating that an appropriate ratio of lanthanum oxide and aluminum oxide can promote nucleation and reduce the grain size. Through Raman spectrometry, it is observed that with a decrease in the Al2O3 ratio, the Raman characteristic peak at 4 385 cm-1 disappears. When these results are combined with those from XRD, it is determined that the LaAl11O18 phase is present. Samples 3# and 4# have characteristic Raman peaks from 3 564～3642 and 4 461～5 554 cm-1, respectively. Upon combining the Raman peaks and XRD pattern for sample 2#, a new LaAlO3 phase is generated. The different ratios of the samples have little effect on the Raman peak intensity, and no new characteristic peaks appear. By enlarging the materials in steels that need targeted research, the evolution process of the modification of alumina powder after the addition of lanthanum oxide powder is analyzed. The research results can reference solving the problem of alumina inclusion modification during the actual steelmaking process.
王 奕，李长荣，庄昌凌. 氧化铝/氧化镧X射线衍射及拉曼光谱研究[J]. 光谱学与光谱分析, 2021, 41(08): 2480-2483.
WANG Yi, LI Chang-rong, ZHUANG Chang-ling. Study on Alumina/Lanthanum Oxide X-Ray Diffraction and Raman Spectroscopy. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2021, 41(08): 2480-2483.
[1] Chen C Y, Jiang Z H, Li Y, et al. ISIJ International, 2020, 60(4): 617.
[2] Somers A E, Peng Y, Chong A L, et al. Corrosion Engineering Science and Technology, 2020, 55(4): 311.
[3] Huang M, Wang Y, Chu C H, et al. Ceramics International, 2017, 43(8): 6397.
[4] Asgharzadeh H, Simchi A. Materials Science & Engineering A, 2005, 403(1-2): 290.
[5] Liu H L, Liu C J, Jiang M F. Materials & Design, 2012, 33(Jan.): 306.
[6] Xia Y Q, Liu W M, Yu L G, et al. Materials Science and Engineering A, 2003, 354(1-2): 17.
[7] Wei W Z, Wu K M, Zhang X, et al. Journal of Materials Research and Technology, 2020, 9(2): 1412.
[8] Heaney P J, Qxman M J, Chen S A. American Mineralogist，2020, 105(5): 652.
[9] Halder N C, Wagner C N J. Journal of Chemical Physics. 1967, 47(11): 4385.
[10] YUAN Jing, SHEN Jia-lin, LIU Jian-kun, et al(袁 静，沈加林，刘建坤，等). Spectroscopy and Spectral Analysis(光谱学与光谱分析), 2018, 38(2): 582.
