打印技术制备表面增强拉曼散射活性基底的研究进展

doi:10.3964/j.issn.1000-0593(2019)11-3326-07

摘要
参考文献
相关文章 (15)

全文: PDF (3764 KB)
输出: BibTeX | EndNote (RIS)

摘要：表面增强拉曼散射(SERS)是一种先进的表面分析技术，可以极大提高吸附在金属表面或附近分子的拉曼散射信号。SERS技术由于其快速准确、灵敏度高、选择性好、样品制备要求低等特点，成为当前的研究热点，在化学、食品、生物、医疗等领域展现出重要的应用前景。而利用SERS技术作为一种常规分析和诊断工具面临的一个主要挑战是如何制备均匀、可重复、稳定的活性基底。打印技术操作简单、效率高、成本低，有助于设计等离激元纳米结构。通过优化“热点”增强电磁场，获得重复性好、稳定性高、增强能力强的SERS活性基底。近年来，印刷技术逐渐被应用于SERS基底的制备。主要综述了制备SERS基底的几种常用印刷技术，包括喷墨印刷、凹版印刷、丝网印刷等。分析了衬底表面润湿性、干燥温度、油墨粘度、表面张力、溶剂等因素对SERS性能的影响。总结了印刷技术制备SERS基底的研究进展，并对其潜在应用和未来发展作了展望。

关键词：表面增强拉曼散射；活性基底；喷墨印刷；凹版印刷；丝网印刷

Abstract：Surface enhanced Raman scattering (SERS) is an advanced surface analysis technique that can enhance the vibrational spectrum of molecules adsorbed on or in the vicinity of metal surfaces enormously. Due to its high speed，accuracy，high sensitivity，good selectivity and minimum requirements for sample preparation，SERS technique becomes the current research hotspot and shows important application prospects in the fields of chemistry，food，biology，medical treatment，etc. However, it is known that the uniformity，reproducibility and stability of SERS active substrates are still main challenges to be overcome for the use of SERS technique as a routine analytical tool .The printing methods have the advantages of simple operation，high efficiency and low cost，which are useful for designing plasmonic nanostructures. In recent years，printing technologies have been gradually applied to the preparation of SERS substrates. By optimizing the amount of hot spots to enhance the electromagnetic field，SERS active substrate with good repeatability，high stability and strong enhancement ability can be obtained. In this work， several common printing techniques for preparing SERS substrates are reviewed，including inkjet printing，gravure printing andscreen printing. The influence of factors on SERS performance is analyzed，such as surface wettability of substrate，drying temperature，ink viscosity，surface tension and solvent. The research progresses of preparing SERS substrates by printing technologies are summarized，and the potential applications and future development are also prospected.

Key words：Surface enhanced Raman scattering; Active substrates; Inkjet printing; Gravure printing; Screen printing

收稿日期: 2018-09-18 修订日期: 2019-01-20

中图分类号:

O433.4

基金资助: 国家自然科学基金项目(61575124，61405116)资助

通讯作者: 肖桂娜 E-mail: xiaoguina@shnu.edu.cn

作者简介: 李玲，1995年生，上海师范大学数理学院硕士研究生 e-mail： 1748415077@qq.com

引用本文:

李玲，肖桂娜. 打印技术制备表面增强拉曼散射活性基底的研究进展[J]. 光谱学与光谱分析, 2019, 39(11): 3326-3332.
LI Ling, XIAO Gui-na. Research Progress of Preparing Surface-Enhanced Raman Scattering Active Substrates by Printing Technologies. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2019, 39(11): 3326-3332.

链接本文:

https://www.gpxygpfx.com/CN/10.3964/j.issn.1000-0593(2019)11-3326-07 或 https://www.gpxygpfx.com/CN/Y2019/V39/I11/3326

[1] FU Cui-cui，LIANG Li-jia，QI Guo-hua，et al(付翠翠，梁丽佳，齐国华，等). Chemical Journal of Chinese Universities(高等学校化学学报)，2015，36(11)：2134.
[2] YANG Huan-di，LIN Xiang，LIU Yuan-lan，et al(杨焕娣，林翔，刘远兰，等). Spectroscopy and Spectral Analysis(光谱学与光谱分析)，2018，38(1)：99.
[3] Zheng J，He L. Comprehensive Reviews in Food Science & Food Safety，2014，13(3)：317.
[4] Zhao W，Wu Y，Liu X，et al. Applied Physics A，2017，123(1)：45.
[5] Zhao X，Wen J，Zhang M，et al. Acs Applied Materials & Interfaces，2017，9：7710.
[6] Tang S，Li Y，Huang H，et al. Acs Applied Materials & Interfaces，2017，9(8)：7472.
[7] Dugandic V，Hidi I J，Weber K，et al. Analytica Chimica Acta，2016，946：73.
[8] Yu W W，White I M. Analyst，2013，138(4)：1020.
[9] Zhou Q，Thokchom A K，Kim D，et al. Sensors and Actuators B，2017，243：176.
[10] Eshkeiti A，Rezaei M，Narakathu B B，et al. Gravure Printed Paper Based Substrate for Detection of Heavy Metals Using Surface Enhanced Raman Spectroscopy(SERS)，2013.
[11] Xiao G，Li Y，Shi W，et al. Applied Surface Science，2017，404：334.
[12] Qu L L，Li D W，Xue J Q，et al. Lab on a Chip，2012，12(5)：876.
[13] Xie Z，Feng S，Wang P，et al. Advanced Optical Materials，2015，3(9)：1232.
[14] Betz J F，Yu W W，Cheng Y, et al. Physical Chemistry Chemical Physics，2014，16(6)：2224.
[15] Benedetti D P，Zhang J，Tague T J，et al. Journal of Raman Spectroscopy，2014，45(1)：123.
[16] Fierro-Mercado P，Renteria-Beleño B，Hernández-Rivera S P. Chemical Physics Letters，2012，552(5)：108.
[17] Eshkeiti A，Narakathu B B，Reddy A S G，et al. Procedia Engineering，2011，25：338.
[18] Eshkeiti A，Narakathu B B，Reddy A S G，et al. Sensors and Actuators B，2012，171-172：705.
[19] Thokchom A K，Zhou Q，Kim D J，et al. Sensors & Actuators B Chemical，2017，252：1063.
[20] Saarinen J J，Valtakari D，Haapanen J，et al. Optical Review，2014，21(3)：339.
[21] Carmelo M，Giuseppe A，Francesco A，et al. Analytical Methods，2018，10：3215.
[22] Yu W W，White I M. Analytical Chemistry，2010，82(23)：9626.
[23] Hoppmann E P，Yu W W，White I M. Methods，2013，63(3)：219.
[24] Weng G，Yang Y，Zhao J，et al. Solid State Communications，2018，272：67.
[25] Yorov K E，Sidorov A V，Polyakov A Y，et al. RSC Advances，2016，6(19)：15535.
[26] Yang Q，Deng M，Li H，et al. Nanoscale，2015，7(2)：421.
[27] Joshi P，Santhanam V. RSC Advances，2016，6(72)：68545.
[28] Joshi P，Santhanam V. Industrial & Engineering Chemistry Research，2018，57(15)：5250.
[29] Benedetti D P，Zhang J，Tague T J，et al. Journal of Raman Spectroscopy，2014，45(1)：123.
[30] Novara C，Petracca F，Virga A，et al. Nanoscale Research Letters，2014，9：527.
[31] Reddy A S G，Narakathu B B，Atashbar M Z，et al. Sensors，2010 IEEE：1596.
[32] Aljanabi F，Narakathu B B，Emamian S，et al. Detection of Cocaine Using Gravure Printed Silver Nanoparticle Based SERS Substrate，2017.
[33] Emamian S，Eshkeiti A，Narakathu B B，et al. Detection of 2，4-Dinitrotoluene (DNT) Using Gravure Printed Surface Enhancement Raman Spectroscopy(SERS) Flexible Substrate，2014.
[34] Emamian S，Eshkeiti A，Narakathu B B，et al. Sensors & Actuators B，2015，217：129.
[35] Kim W S，Shin J H，Park H K，et al. Sensors & Actuators B Chemical，2016，222：1112.
[36] Qu L L，Song Q X，Li Y T，et al. Analytica Chimica Acta，2013，792(16)：86.
[37] Wu W，Liu L，Dai Z，et al. Scientific Reports，2015，5：10208.
[38] Cui S，Dai Z，Tian Q，et al. Journal of Materials Chemistry C，2016，4：6371.
[39] Torul H，Çiftçi H，Çetin D，et al. Analytical & Bioanalytical Chemistry，2015，407(27)：8243.
[40] Zhan H，Cheng F，Chen Y，et al. Composites Part B Engineering，2016，84：222.