The Study of Classification Modeling Method for Near Infrared Spectroscopy of Tobacco Leaves Based on Convolution Neural Network
LU Meng-yao1,4, YANG Kai2, SONG Peng-fei3, SHU Ru-xin2，WANG Luo-ping3, YANG Yu-qing1,4, LIU Hui1,4, LI Jun-hui1,4*, ZHAO Long-lian1,4, ZHANG Ye-hui1,4
1. College of Information and Electrical Engineering, China Agricultural University, Beijing 100083, China
2. Technology Center of Shanghai Tobacco(Group) Gorporation, Shanghai 200082, China
3. Yunnan Tobacco Technology Center, Kunming 650202, China
4. Key Laboratory of Modern Precision Agriculture System Integration Research, Ministry of Education, China Agricultural University, Beijing 100083, China
Abstract：Convolutional neural network (CNN) was widely used in image classification and recognition but its application in near infrared spectroscopy has not been reported. Therefore, the near-infrared spectroscopy classification modeling method based on CNN was studied in this paper. Taking into account the characteristics of near-infrared spectral data, an improved CNN modeling method was presented in this paper, which improves the CNN classical model Lenet-5: ①The square matrix convolution kernel was transformed into a vector convolution kernel for one-dimensional near-infrared spectroscopy. ②The C5, F6 and output layers of the lenet-5 structure were changed to single-layer sensing machines in order to simplify the network structure. At the same time, the method of sampling points was used to reduce the dimensionality of near infrared spectrum and speed up the convergence rate. The influence of convolution kernel size on modeling results was also studied in this paper. NIR-CNN model was established by the near-infrared spectroscopy of 600 central tobacco samples from northeast, Huanghuai and southwest China. The accuracy of the model was 98.2% and 95% for the training set and test set. The experimental results showed that the application of CNN could accurately and reliably identify the near infrared spectrum data. This method provided guidance for the scientific and rational utilization of raw materials of tobacco enterprises, and it was important to maintain the quality stability of cigarette products. The method of near infrared spectroscopy based on CNN could also be applied in the classification of other agricultural products.
Key words：Convolution neural network; Near-Infrared spectroscopy; Classification discrimination; Tobacco-producing areas
鲁梦瑶，杨 凯，宋鹏飞，束茹欣，王萝萍，杨玉清，刘 慧，李军会，赵龙莲，张晔晖. 基于卷积神经网络的烟叶近红外光谱分类建模方法研究[J]. 光谱学与光谱分析, 2018, 38(12): 3724-3728.
LU Meng-yao, YANG Kai, SONG Peng-fei, SHU Ru-xin，WANG Luo-ping, YANG Yu-qing, LIU Hui, LI Jun-hui, ZHAO Long-lian, ZHANG Ye-hui. The Study of Classification Modeling Method for Near Infrared Spectroscopy of Tobacco Leaves Based on Convolution Neural Network. SPECTROSCOPY AND SPECTRAL ANALYSIS, 2018, 38(12): 3724-3728.
[1] QIAO Xue-yi, WANG Bing, WU Dian-xin, et al(乔学义, 王 兵, 吴殿信，等). Tobacco Science & Technology(烟草科技), 2016, 49(9): 70.
[2] YIN Qi-sheng, ZHANG Yan-ling, XUE Chao-qun, et al(尹启生, 张艳玲, 薛超群, 等). Acta Tabacaria Sinica(中国烟草学报), 2009, 15(4): 33.
[3] PENG Xin-hui, YI Jian-hua, ZHOU Qing-ming(彭新辉, 易建华, 周清明). Chinese Tobacco Science(中国烟草科学), 2009, 30(1): 68.
[4] SHU Ru-xin, SUN Ping, YANG Kai, et al(束茹欣, 孙 平, 杨 凯, 等). Tobacco Science & Technology(烟草科技), 2011，(11): 50.
[5] ZHANG Ying, HE Li-yuan(章 英, 贺立源). Transactions of the Chinese Society of Agricultural Engineering(农业工程学报), 2011, 27(4): 350.
[6] TANG Guo, TIAN Kuang-da, LI Zu-hong(唐 果, 田旷达, 李祖红, 等). Tobacco Science & Technology(烟草科技), 2013，(4): 60.
[7] Lecun Y, Kavukcuoglu K, Farabet C. IEEE International Symposium on Circuits & Systems, 2010, 14 (5): 253.
[8] Ji S, Xu W, Yang M, et al. IEEE Transactions on Pattern Analysis & Machine Intelligence, 2013, 35(1): 221.
[9] Su B, Lu S. Pattern Recognition, 2007, 63: 397.
[10] Sarikaya R, Hinton G E, Deoras A. IEEE/ACM Transactions on Audio Speech & Language Processing, 2014, 23(4): 778.
[11] Mohamed A R, Dahl G E, Hinton G. IEEE Transactions on Audio Speech & Language Processing, 2012, 20(1): 14.
[12] Abdel-Hamid O, Mohamed A R, Jiang H, et al. IEEE International Conference on Acoustics, 2012, 22(10): 77.
[13] Lecun Y, Bottou L, Bengio Y, et al. Proceedingsof the IEEE, 1998, 86(11): 2278.
